From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [ Upstream commit 1cbd44666216278bbb6a55bcb6b9283702171c77 ] When multiple channels are part of a video group, the transfer is triggered only when all channels in the group are ready. The logic to do so is incorrect, as it causes the descriptors for all channels but the last one in a group to not being pushed to the hardware. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210307040629.29308-2-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/dma/xilinx/xilinx_dpdma.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c index 55df63dead8d..d504112c609e 100644 --- a/drivers/dma/xilinx/xilinx_dpdma.c +++ b/drivers/dma/xilinx/xilinx_dpdma.c @@ -839,6 +839,7 @@ static void xilinx_dpdma_chan_queue_transfer(struct xilinx_dpdma_chan *chan) struct xilinx_dpdma_tx_desc *desc; struct virt_dma_desc *vdesc; u32 reg, channels; + bool first_frame; lockdep_assert_held(&chan->lock); @@ -852,14 +853,6 @@ static void xilinx_dpdma_chan_queue_transfer(struct xilinx_dpdma_chan *chan) chan->running = true; } - if (chan->video_group) - channels = xilinx_dpdma_chan_video_group_ready(chan); - else - channels = BIT(chan->id); - - if (!channels) - return; - vdesc = vchan_next_desc(&chan->vchan); if (!vdesc) return; @@ -884,13 +877,26 @@ static void xilinx_dpdma_chan_queue_transfer(struct xilinx_dpdma_chan *chan) FIELD_PREP(XILINX_DPDMA_CH_DESC_START_ADDRE_MASK, upper_32_bits(sw_desc->dma_addr))); - if (chan->first_frame) + first_frame = chan->first_frame; + chan->first_frame = false; + + if (chan->video_group) { + channels = xilinx_dpdma_chan_video_group_ready(chan); + /* + * Trigger the transfer only when all channels in the group are + * ready. + */ + if (!channels) + return; + } else { + channels = BIT(chan->id); + } + + if (first_frame) reg = XILINX_DPDMA_GBL_TRIG_MASK(channels); else reg = XILINX_DPDMA_GBL_RETRIG_MASK(channels); - chan->first_frame = false; - dpdma_write(xdev->reg, XILINX_DPDMA_GBL, reg); } -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [ Upstream commit 868833fbffbe51c487df4f95d4de9194264a4b30 ] The active descriptor pointer is accessed from different contexts, including different interrupt handlers, and its access must be protected by the channel's lock. This wasn't done in the done IRQ handler. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20210307040629.29308-3-laurent.pinchart@ideasonboard.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/dma/xilinx/xilinx_dpdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c index d504112c609e..70b29bd079c9 100644 --- a/drivers/dma/xilinx/xilinx_dpdma.c +++ b/drivers/dma/xilinx/xilinx_dpdma.c @@ -1048,13 +1048,14 @@ static int xilinx_dpdma_chan_stop(struct xilinx_dpdma_chan *chan) */ static void xilinx_dpdma_chan_done_irq(struct xilinx_dpdma_chan *chan) { - struct xilinx_dpdma_tx_desc *active = chan->desc.active; + struct xilinx_dpdma_tx_desc *active; unsigned long flags; spin_lock_irqsave(&chan->lock, flags); xilinx_dpdma_debugfs_desc_done_irq(chan); + active = chan->desc.active; if (active) vchan_cyclic_callback(&active->vdesc); else -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
From: Jisheng Zhang <Jisheng.Zhang@synaptics.com> [ Upstream commit 738fa58ee1328481d1d7889e7c430b3401c571b9 ] If instruction being single stepped caused a page fault, the kprobes is cancelled to let the page fault handler continue as a normal page fault. But the local irqflags are disabled so cpu will restore pstate with DAIF masked. After pagefault is serviced, the kprobes is triggerred again, we overwrite the saved_irqflag by calling kprobes_save_local_irqflag(). NOTE, DAIF is masked in this new saved irqflag. After kprobes is serviced, the cpu pstate is retored with DAIF masked. This patch is inspired by one patch for riscv from Liao Chang. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20210412174101.6bfb0594@xhacker.debian Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- arch/arm64/kernel/probes/kprobes.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index f11a1a1f7026..798c3e78b84b 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -286,10 +286,12 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr) if (!instruction_pointer(regs)) BUG(); - if (kcb->kprobe_status == KPROBE_REENTER) + if (kcb->kprobe_status == KPROBE_REENTER) { restore_previous_kprobe(kcb); - else + } else { + kprobes_restore_local_irqflag(kcb, regs); reset_current_kprobe(); + } break; case KPROBE_HIT_ACTIVE: -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel