From: Dong Aisheng <aisheng.dong@nxp.com>
To: linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: dongas86@gmail.com, kernel@pengutronix.de, shawnguo@kernel.org,
linux-imx@nxp.com, abel.vesa@nxp.com, sboyd@kernel.org,
Dong Aisheng <aisheng.dong@nxp.com>
Subject: [PATCH 4/6] clk: imx: scu: add gpr clocks support
Date: Fri, 23 Apr 2021 11:33:32 +0800 [thread overview]
Message-ID: <20210423033334.3317992-4-aisheng.dong@nxp.com> (raw)
In-Reply-To: <20210423033334.3317992-1-aisheng.dong@nxp.com>
SCU clock protocol supports a few clocks based on GPR controller
registers including mux/divider/gate.
And a general clock register API to support them all.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
drivers/clk/imx/clk-scu.c | 186 ++++++++++++++++++++++++++++++++++++++
drivers/clk/imx/clk-scu.h | 29 ++++++
2 files changed, 215 insertions(+)
diff --git a/drivers/clk/imx/clk-scu.c b/drivers/clk/imx/clk-scu.c
index 1f5518b7ab39..cff0e1bd7030 100644
--- a/drivers/clk/imx/clk-scu.c
+++ b/drivers/clk/imx/clk-scu.c
@@ -52,6 +52,22 @@ struct clk_scu {
u32 rate;
};
+/*
+ * struct clk_gpr_scu - Description of one SCU GPR clock
+ * @hw: the common clk_hw
+ * @rsrc_id: resource ID of this SCU clock
+ * @gpr_id: GPR ID index to control the divider
+ */
+struct clk_gpr_scu {
+ struct clk_hw hw;
+ u16 rsrc_id;
+ u8 gpr_id;
+ u8 flags;
+ bool gate_invert;
+};
+
+#define to_clk_gpr_scu(_hw) container_of(_hw, struct clk_gpr_scu, hw)
+
/*
* struct imx_sc_msg_req_set_clock_rate - clock set rate protocol
* @hdr: SCU protocol header
@@ -604,3 +620,173 @@ void imx_clk_scu_unregister(void)
}
}
}
+
+static unsigned long clk_gpr_div_scu_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_gpr_scu *clk = to_clk_gpr_scu(hw);
+ unsigned long rate = 0;
+ u32 val;
+ int err;
+
+ err = imx_sc_misc_get_control(ccm_ipc_handle, clk->rsrc_id,
+ clk->gpr_id, &val);
+
+ rate = val ? parent_rate / 2 : parent_rate;
+
+ return err ? 0 : rate;
+}
+
+static long clk_gpr_div_scu_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ if (rate < *prate)
+ rate = *prate / 2;
+ else
+ rate = *prate;
+
+ return rate;
+}
+
+static int clk_gpr_div_scu_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_gpr_scu *clk = to_clk_gpr_scu(hw);
+ uint32_t val;
+ int err;
+
+ val = (rate < parent_rate) ? 1 : 0;
+ err = imx_sc_misc_set_control(ccm_ipc_handle, clk->rsrc_id,
+ clk->gpr_id, val);
+
+ return err ? -EINVAL : 0;
+}
+
+static const struct clk_ops clk_gpr_div_scu_ops = {
+ .recalc_rate = clk_gpr_div_scu_recalc_rate,
+ .round_rate = clk_gpr_div_scu_round_rate,
+ .set_rate = clk_gpr_div_scu_set_rate,
+};
+
+static u8 clk_gpr_mux_scu_get_parent(struct clk_hw *hw)
+{
+ struct clk_gpr_scu *clk = to_clk_gpr_scu(hw);
+ u32 val = 0;
+
+ imx_sc_misc_get_control(ccm_ipc_handle, clk->rsrc_id,
+ clk->gpr_id, &val);
+
+ return (u8)val;
+}
+
+static int clk_gpr_mux_scu_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_gpr_scu *clk = to_clk_gpr_scu(hw);
+
+ return imx_sc_misc_set_control(ccm_ipc_handle, clk->rsrc_id,
+ clk->gpr_id, index);
+}
+
+static const struct clk_ops clk_gpr_mux_scu_ops = {
+ .get_parent = clk_gpr_mux_scu_get_parent,
+ .set_parent = clk_gpr_mux_scu_set_parent,
+};
+
+static int clk_gpr_gate_scu_prepare(struct clk_hw *hw)
+{
+ struct clk_gpr_scu *clk = to_clk_gpr_scu(hw);
+
+ return imx_sc_misc_set_control(ccm_ipc_handle, clk->rsrc_id,
+ clk->gpr_id, !clk->gate_invert);
+}
+
+static void clk_gpr_gate_scu_unprepare(struct clk_hw *hw)
+{
+ struct clk_gpr_scu *clk = to_clk_gpr_scu(hw);
+ int ret;
+
+ ret = imx_sc_misc_set_control(ccm_ipc_handle, clk->rsrc_id,
+ clk->gpr_id, clk->gate_invert);
+ if (ret)
+ pr_err("%s: clk unprepare failed %d\n", clk_hw_get_name(hw),
+ ret);
+}
+
+static int clk_gpr_gate_scu_is_prepared(struct clk_hw *hw)
+{
+ struct clk_gpr_scu *clk = to_clk_gpr_scu(hw);
+ int ret;
+ u32 val;
+
+ ret = imx_sc_misc_get_control(ccm_ipc_handle, clk->rsrc_id,
+ clk->gpr_id, &val);
+ if (ret)
+ return ret;
+
+ return clk->gate_invert ? !val : val;
+}
+
+static const struct clk_ops clk_gpr_gate_scu_ops = {
+ .prepare = clk_gpr_gate_scu_prepare,
+ .unprepare = clk_gpr_gate_scu_unprepare,
+ .is_prepared = clk_gpr_gate_scu_is_prepared,
+};
+
+struct clk_hw *__imx_clk_gpr_scu(const char *name, const char * const *parent_name,
+ int num_parents, u32 rsrc_id, u8 gpr_id, u8 flags,
+ bool invert)
+{
+ struct imx_scu_clk_node *clk_node;
+ struct clk_gpr_scu *clk;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+ int ret;
+
+ if (rsrc_id >= IMX_SC_R_LAST || gpr_id >= IMX_SC_C_LAST)
+ return ERR_PTR(-EINVAL);
+
+ clk_node = kzalloc(sizeof(*clk_node), GFP_KERNEL);
+ if (!clk_node)
+ return ERR_PTR(-ENOMEM);
+
+ clk = kzalloc(sizeof(*clk), GFP_KERNEL);
+ if (!clk) {
+ kfree(clk_node);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ clk->rsrc_id = rsrc_id;
+ clk->gpr_id = gpr_id;
+ clk->flags = flags;
+ clk->gate_invert = invert;
+
+ if (flags & IMX_SCU_GPR_CLK_GATE)
+ init.ops = &clk_gpr_gate_scu_ops;
+
+ if (flags & IMX_SCU_GPR_CLK_DIV)
+ init.ops = &clk_gpr_div_scu_ops;
+
+ if (flags & IMX_SCU_GPR_CLK_MUX)
+ init.ops = &clk_gpr_mux_scu_ops;
+
+ init.flags = 0;
+ init.name = name;
+ init.parent_names = parent_name;
+ init.num_parents = num_parents;
+
+ clk->hw.init = &init;
+
+ hw = &clk->hw;
+ ret = clk_hw_register(NULL, hw);
+ if (ret) {
+ kfree(clk);
+ kfree(clk_node);
+ hw = ERR_PTR(ret);
+ } else {
+ clk_node->hw = hw;
+ clk_node->clk_type = gpr_id;
+ list_add_tail(&clk_node->node, &imx_scu_clks[rsrc_id]);
+ }
+
+ return hw;
+}
diff --git a/drivers/clk/imx/clk-scu.h b/drivers/clk/imx/clk-scu.h
index a6c6d3103e94..8ebee0cb0fe6 100644
--- a/drivers/clk/imx/clk-scu.h
+++ b/drivers/clk/imx/clk-scu.h
@@ -10,6 +10,10 @@
#include <linux/firmware/imx/sci.h>
#include <linux/of.h>
+#define IMX_SCU_GPR_CLK_GATE BIT(0)
+#define IMX_SCU_GPR_CLK_DIV BIT(1)
+#define IMX_SCU_GPR_CLK_MUX BIT(2)
+
extern struct list_head imx_scu_clks[];
extern const struct dev_pm_ops imx_clk_lpcg_scu_pm_ops;
@@ -31,6 +35,10 @@ struct clk_hw *__imx_clk_lpcg_scu(struct device *dev, const char *name,
void __iomem *reg, u8 bit_idx, bool hw_gate);
void imx_clk_lpcg_scu_unregister(struct clk_hw *hw);
+struct clk_hw *__imx_clk_gpr_scu(const char *name, const char * const *parent_name,
+ int num_parents, u32 rsrc_id, u8 gpr_id, u8 flags,
+ bool invert);
+
static inline struct clk_hw *imx_clk_scu(const char *name, u32 rsrc_id,
u8 clk_type)
{
@@ -58,4 +66,25 @@ static inline struct clk_hw *imx_clk_lpcg_scu(const char *name, const char *pare
return __imx_clk_lpcg_scu(NULL, name, parent_name, flags, reg,
bit_idx, hw_gate);
}
+
+static inline struct clk_hw *imx_clk_gate_gpr_scu(const char *name, const char *parent_name,
+ u32 rsrc_id, u8 gpr_id, bool invert)
+{
+ return __imx_clk_gpr_scu(name, &parent_name, 1, rsrc_id, gpr_id,
+ IMX_SCU_GPR_CLK_GATE, invert);
+}
+
+static inline struct clk_hw *imx_clk_divider_gpr_scu(const char *name, const char *parent_name,
+ u32 rsrc_id, u8 gpr_id)
+{
+ return __imx_clk_gpr_scu(name, &parent_name, 1, rsrc_id, gpr_id,
+ IMX_SCU_GPR_CLK_DIV, 0);
+}
+
+static inline struct clk_hw *imx_clk_mux_gpr_scu(const char *name, const char * const *parent_names,
+ int num_parents, u32 rsrc_id, u8 gpr_id)
+{
+ return __imx_clk_gpr_scu(name, parent_names, num_parents, rsrc_id,
+ gpr_id, IMX_SCU_GPR_CLK_MUX, 0);
+}
#endif
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-23 3:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-23 3:33 [PATCH 1/6] dt-bindings: arm: imx: scu: fix naming typo of clk compatible string Dong Aisheng
2021-04-23 3:33 ` [PATCH 2/6] dt-bindings: arm: imx: scu: drop deprecated legacy clock binding Dong Aisheng
2021-05-03 16:47 ` Rob Herring
2021-04-23 3:33 ` [PATCH 3/6] clk: imx: scu: remove legacy scu clock binding support Dong Aisheng
2021-05-13 20:04 ` Abel Vesa
2021-04-23 3:33 ` Dong Aisheng [this message]
2021-05-13 6:58 ` [PATCH 4/6] clk: imx: scu: add gpr clocks support Abel Vesa
2021-05-17 9:49 ` Dong Aisheng
2021-05-17 9:52 ` Abel Vesa
2021-04-23 3:33 ` [PATCH 5/6] clk: imx8qxp: add clock valid checking mechnism Dong Aisheng
2021-05-13 7:13 ` Abel Vesa
2021-05-17 9:48 ` Dong Aisheng
2021-04-23 3:33 ` [PATCH 6/6] clk: imx8qm: add clock valid resource checking Dong Aisheng
2021-05-13 7:17 ` Abel Vesa
2021-06-02 1:50 ` Stephen Boyd
2021-06-04 6:46 ` Abel Vesa
2021-06-04 7:04 ` Dong Aisheng
2021-06-04 8:20 ` Abel Vesa
2021-05-03 16:46 ` [PATCH 1/6] dt-bindings: arm: imx: scu: fix naming typo of clk compatible string Rob Herring
2021-05-13 7:18 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210423033334.3317992-4-aisheng.dong@nxp.com \
--to=aisheng.dong@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=dongas86@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).