From: Shawn Guo <shawnguo@kernel.org>
To: Richard Zhu <hongxing.zhu@nxp.com>
Cc: l.stach@pengutronix.de, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy
Date: Mon, 26 Apr 2021 09:24:57 +0800 [thread overview]
Message-ID: <20210426012456.GB27585@dragon> (raw)
In-Reply-To: <1617005163-29824-1-git-send-email-hongxing.zhu@nxp.com>
On Mon, Mar 29, 2021 at 04:06:03PM +0800, Richard Zhu wrote:
> Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY.
> In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data
> sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design,
> the VREG_BYPASS bits of GPR registers should be cleared from default
> value 1b'1 to 1b'0. Thus, the internal 3v3 to 1v8 translator would be
> turned on.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
> arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> index 85b045253a0e..4d2035e3dd7c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -318,6 +318,7 @@
> <&clk IMX8MQ_CLK_PCIE1_PHY>,
> <&pcie0_refclk>;
> clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
> + vph-supply = <&vgen5_reg>;
Hmm, I do not see this in the bindings doc.
Shawn
> status = "okay";
> };
>
> --
> 2.17.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-04-26 1:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-29 8:06 [PATCH] arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy Richard Zhu
2021-04-26 1:24 ` Shawn Guo [this message]
2021-04-14 2:26 [PATCH] arm64: dts: imx8mq-evk: add one regulator used to power up Richard Zhu
2021-04-14 2:26 ` [PATCH] arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy Richard Zhu
2021-04-14 3:02 ` Richard Zhu
2021-05-13 7:14 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210426012456.GB27585@dragon \
--to=shawnguo@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).