* [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting
@ 2021-04-29 4:28 Hsin-Yi Wang
2021-04-29 4:28 ` [PATCH v6 2/3] drm/mediatek: init panel orientation property Hsin-Yi Wang
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Hsin-Yi Wang @ 2021-04-29 4:28 UTC (permalink / raw)
To: dri-devel
Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
linux-mediatek
drm_dev_register() sets connector->registration_state to
DRM_CONNECTOR_REGISTERED and dev->registered to true. If
drm_connector_set_panel_orientation() is first called after
drm_dev_register(), it will fail several checks and results in following
warning.
Add a function to create panel orientation property and set default value
to UNKNOWN, so drivers can call this function to init the property earlier
, and let the panel set the real value later.
[ 4.480976] ------------[ cut here ]------------
[ 4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
<snip>
[ 4.609772] Call trace:
[ 4.612208] __drm_mode_object_add+0xb4/0xbc
[ 4.616466] drm_mode_object_add+0x20/0x2c
[ 4.620552] drm_property_create+0xdc/0x174
[ 4.624723] drm_property_create_enum+0x34/0x98
[ 4.629241] drm_connector_set_panel_orientation+0x64/0xa0
[ 4.634716] boe_panel_get_modes+0x88/0xd8
[ 4.638802] drm_panel_get_modes+0x2c/0x48
[ 4.642887] panel_bridge_get_modes+0x1c/0x28
[ 4.647233] drm_bridge_connector_get_modes+0xa0/0xd4
[ 4.652273] drm_helper_probe_single_connector_modes+0x218/0x700
[ 4.658266] drm_mode_getconnector+0x1b4/0x45c
[ 4.662699] drm_ioctl_kernel+0xac/0x128
[ 4.666611] drm_ioctl+0x268/0x410
[ 4.670002] drm_compat_ioctl+0xdc/0xf0
[ 4.673829] __arm64_compat_sys_ioctl+0xc8/0x100
[ 4.678436] el0_svc_common+0xf4/0x1c0
[ 4.682174] do_el0_svc_compat+0x28/0x3c
[ 4.686088] el0_svc_compat+0x10/0x1c
[ 4.689738] el0_sync_compat_handler+0xa8/0xcc
[ 4.694171] el0_sync_compat+0x178/0x180
[ 4.698082] ---[ end trace b4f2db9d9c88610b ]---
[ 4.702721] ------------[ cut here ]------------
[ 4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
<snip>
[ 4.833830] Call trace:
[ 4.836266] drm_object_attach_property+0x48/0xb8
[ 4.840958] drm_connector_set_panel_orientation+0x84/0xa0
[ 4.846432] boe_panel_get_modes+0x88/0xd8
[ 4.850516] drm_panel_get_modes+0x2c/0x48
[ 4.854600] panel_bridge_get_modes+0x1c/0x28
[ 4.858946] drm_bridge_connector_get_modes+0xa0/0xd4
[ 4.863984] drm_helper_probe_single_connector_modes+0x218/0x700
[ 4.869978] drm_mode_getconnector+0x1b4/0x45c
[ 4.874410] drm_ioctl_kernel+0xac/0x128
[ 4.878320] drm_ioctl+0x268/0x410
[ 4.881711] drm_compat_ioctl+0xdc/0xf0
[ 4.885536] __arm64_compat_sys_ioctl+0xc8/0x100
[ 4.890142] el0_svc_common+0xf4/0x1c0
[ 4.893879] do_el0_svc_compat+0x28/0x3c
[ 4.897791] el0_svc_compat+0x10/0x1c
[ 4.901441] el0_sync_compat_handler+0xa8/0xcc
[ 4.905873] el0_sync_compat+0x178/0x180
[ 4.909783] ---[ end trace b4f2db9d9c88610c ]---
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
v6, v5:
don't create property in set_panel_orientation.
v4, v3:
create property in dsi driver and set value in panel.
v2:
create property in connector init
https://patchwork.kernel.org/project/linux-mediatek/patch/20210426051848.2600890-1-hsinyi@chromium.org/
v1:
set panel orientation in dsi driver
https://patchwork.kernel.org/project/linux-mediatek/patch/20210409045314.3420733-1-hsinyi@chromium.org/
---
drivers/gpu/drm/drm_connector.c | 58 ++++++++++++++++++-------
drivers/gpu/drm/i915/display/icl_dsi.c | 1 +
drivers/gpu/drm/i915/display/intel_dp.c | 1 +
drivers/gpu/drm/i915/display/vlv_dsi.c | 1 +
include/drm/drm_connector.h | 2 +
5 files changed, 47 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 7631f76e7f34..7189baaabf41 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1210,7 +1210,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
* INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
* coordinates, so if userspace rotates the picture to adjust for
* the orientation it must also apply the same transformation to the
- * touchscreen input coordinates. This property is initialized by calling
+ * touchscreen input coordinates. This property value is set by calling
* drm_connector_set_panel_orientation() or
* drm_connector_set_panel_orientation_with_quirk()
*
@@ -2173,8 +2173,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
* @connector: connector for which to set the panel-orientation property.
* @panel_orientation: drm_panel_orientation value to set
*
- * This function sets the connector's panel_orientation and attaches
- * a "panel orientation" property to the connector.
+ * This function sets the connector's panel_orientation value. If the property
+ * doesn't exist, it will return an error.
*
* Calling this function on a connector where the panel_orientation has
* already been set is a no-op (e.g. the orientation has been overridden with
@@ -2205,19 +2205,11 @@ int drm_connector_set_panel_orientation(
info->panel_orientation = panel_orientation;
prop = dev->mode_config.panel_orientation_property;
- if (!prop) {
- prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
- "panel orientation",
- drm_panel_orientation_enum_list,
- ARRAY_SIZE(drm_panel_orientation_enum_list));
- if (!prop)
- return -ENOMEM;
-
- dev->mode_config.panel_orientation_property = prop;
- }
+ if (WARN_ON(!prop))
+ return -EINVAL;
- drm_object_attach_property(&connector->base, prop,
- info->panel_orientation);
+ drm_object_property_set_value(&connector->base, prop,
+ info->panel_orientation);
return 0;
}
EXPORT_SYMBOL(drm_connector_set_panel_orientation);
@@ -2225,7 +2217,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);
/**
* drm_connector_set_panel_orientation_with_quirk -
* set the connector's panel_orientation after checking for quirks
- * @connector: connector for which to init the panel-orientation property.
+ * @connector: connector for which to set the panel-orientation property.
* @panel_orientation: drm_panel_orientation value to set
* @width: width in pixels of the panel, used for panel quirk detection
* @height: height in pixels of the panel, used for panel quirk detection
@@ -2252,6 +2244,40 @@ int drm_connector_set_panel_orientation_with_quirk(
}
EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
+/**
+ * drm_connector_init_panel_orientation_property -
+ * create the connector's panel orientation property
+ *
+ * This function attaches a "panel orientation" property to the connector
+ * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
+ *
+ * The value of the property can be set by drm_connector_set_panel_orientation()
+ * or drm_connector_set_panel_orientation_with_quirk() later.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property(
+ struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_property *prop;
+
+ prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+ "panel orientation",
+ drm_panel_orientation_enum_list,
+ ARRAY_SIZE(drm_panel_orientation_enum_list));
+ if (!prop)
+ return -ENOMEM;
+
+ dev->mode_config.panel_orientation_property = prop;
+ drm_object_attach_property(&connector->base, prop,
+ DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+
int drm_connector_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 9282978060b0..5ac4538e4283 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
+ drm_connector_init_panel_orientation_property(&connector->base);
drm_connector_set_panel_orientation_with_quirk(&connector->base,
intel_dsi_get_panel_orientation(connector),
connector->panel.fixed_mode->hdisplay,
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index a5231ac3443a..f1d664e5abb2 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
intel_panel_setup_backlight(connector, pipe);
if (fixed_mode) {
+ drm_connector_init_panel_orientation_property(connector);
drm_connector_set_panel_orientation_with_quirk(connector,
dev_priv->vbt.orientation,
fixed_mode->hdisplay, fixed_mode->vdisplay);
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index 9bee99fe5495..853855482af1 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
+ drm_connector_init_panel_orientation_property(&connector->base);
drm_connector_set_panel_orientation_with_quirk(
&connector->base,
intel_dsi_get_panel_orientation(connector),
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 1922b278ffad..4396c1c4a5db 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1696,6 +1696,8 @@ int drm_connector_set_panel_orientation_with_quirk(
struct drm_connector *connector,
enum drm_panel_orientation panel_orientation,
int width, int height);
+int drm_connector_init_panel_orientation_property(
+ struct drm_connector *connector);
int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
int min, int max);
--
2.31.1.498.g6c1eba8ee3d-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v6 2/3] drm/mediatek: init panel orientation property
2021-04-29 4:28 [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting Hsin-Yi Wang
@ 2021-04-29 4:28 ` Hsin-Yi Wang
2021-05-11 16:21 ` Chun-Kuang Hu
2021-04-29 4:28 ` [PATCH v6 3/3] arm64: dts: mt8183: Add panel rotation Hsin-Yi Wang
` (2 subsequent siblings)
3 siblings, 1 reply; 6+ messages in thread
From: Hsin-Yi Wang @ 2021-04-29 4:28 UTC (permalink / raw)
To: dri-devel
Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
linux-mediatek
Init panel orientation property after connector is initialized. Let the
panel driver decides the orientation value later.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index ae403c67cbd9..9da1fd649131 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -964,6 +964,13 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
ret = PTR_ERR(dsi->connector);
goto err_cleanup_encoder;
}
+
+ ret = drm_connector_init_panel_orientation_property(dsi->connector);
+ if (ret) {
+ DRM_ERROR("Unable to init panel orientation\n");
+ goto err_cleanup_encoder;
+ }
+
drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
return 0;
--
2.31.1.498.g6c1eba8ee3d-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v6 3/3] arm64: dts: mt8183: Add panel rotation
2021-04-29 4:28 [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting Hsin-Yi Wang
2021-04-29 4:28 ` [PATCH v6 2/3] drm/mediatek: init panel orientation property Hsin-Yi Wang
@ 2021-04-29 4:28 ` Hsin-Yi Wang
2021-05-18 4:32 ` [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting Hsin-Yi Wang
2021-05-20 13:03 ` Sean Paul
3 siblings, 0 replies; 6+ messages in thread
From: Hsin-Yi Wang @ 2021-04-29 4:28 UTC (permalink / raw)
To: dri-devel
Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, linux-kernel,
Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
linux-mediatek
krane, kakadu, and kodama boards have a default panel rotation.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ff56bcfa3370..793cc9501337 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -263,6 +263,7 @@ panel: panel@0 {
avee-supply = <&ppvarp_lcd>;
pp1800-supply = <&pp1800_lcd>;
backlight = <&backlight_lcd0>;
+ rotation = <270>;
port {
panel_in: endpoint {
remote-endpoint = <&dsi_out>;
--
2.31.1.498.g6c1eba8ee3d-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v6 2/3] drm/mediatek: init panel orientation property
2021-04-29 4:28 ` [PATCH v6 2/3] drm/mediatek: init panel orientation property Hsin-Yi Wang
@ 2021-05-11 16:21 ` Chun-Kuang Hu
0 siblings, 0 replies; 6+ messages in thread
From: Chun-Kuang Hu @ 2021-05-11 16:21 UTC (permalink / raw)
To: Hsin-Yi Wang
Cc: DRI Development, Chun-Kuang Hu, Sean Paul, Maarten Lankhorst,
Maxime Ripard, Thomas Zimmermann, David Airlie, Daniel Vetter,
linux-kernel, Rob Herring, Matthias Brugger, DTML, Linux ARM,
moderated list:ARM/Mediatek SoC support
Hi, Hsin-Yi:
Hsin-Yi Wang <hsinyi@chromium.org> 於 2021年4月29日 週四 下午12:28寫道：
>
> Init panel orientation property after connector is initialized. Let the
> panel driver decides the orientation value later.
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index ae403c67cbd9..9da1fd649131 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -964,6 +964,13 @@ static int mtk_dsi_encoder_init(struct drm_device *drm, struct mtk_dsi *dsi)
> ret = PTR_ERR(dsi->connector);
> goto err_cleanup_encoder;
> }
> +
> + ret = drm_connector_init_panel_orientation_property(dsi->connector);
> + if (ret) {
> + DRM_ERROR("Unable to init panel orientation\n");
> + goto err_cleanup_encoder;
> + }
> +
> drm_connector_attach_encoder(dsi->connector, &dsi->encoder);
>
> return 0;
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting
2021-04-29 4:28 [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting Hsin-Yi Wang
2021-04-29 4:28 ` [PATCH v6 2/3] drm/mediatek: init panel orientation property Hsin-Yi Wang
2021-04-29 4:28 ` [PATCH v6 3/3] arm64: dts: mt8183: Add panel rotation Hsin-Yi Wang
@ 2021-05-18 4:32 ` Hsin-Yi Wang
2021-05-20 13:03 ` Sean Paul
3 siblings, 0 replies; 6+ messages in thread
From: Hsin-Yi Wang @ 2021-05-18 4:32 UTC (permalink / raw)
To: dri-devel
Cc: Chun-Kuang Hu, Sean Paul, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, lkml,
Rob Herring, Matthias Brugger, Devicetree List,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
moderated list:ARM/Mediatek SoC support
On Thu, Apr 29, 2021 at 12:28 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> drm_dev_register() sets connector->registration_state to
> DRM_CONNECTOR_REGISTERED and dev->registered to true. If
> drm_connector_set_panel_orientation() is first called after
> drm_dev_register(), it will fail several checks and results in following
> warning.
>
> Add a function to create panel orientation property and set default value
> to UNKNOWN, so drivers can call this function to init the property earlier
> , and let the panel set the real value later.
>
> [ 4.480976] ------------[ cut here ]------------
> [ 4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
> <snip>
> [ 4.609772] Call trace:
> [ 4.612208] __drm_mode_object_add+0xb4/0xbc
> [ 4.616466] drm_mode_object_add+0x20/0x2c
> [ 4.620552] drm_property_create+0xdc/0x174
> [ 4.624723] drm_property_create_enum+0x34/0x98
> [ 4.629241] drm_connector_set_panel_orientation+0x64/0xa0
> [ 4.634716] boe_panel_get_modes+0x88/0xd8
> [ 4.638802] drm_panel_get_modes+0x2c/0x48
> [ 4.642887] panel_bridge_get_modes+0x1c/0x28
> [ 4.647233] drm_bridge_connector_get_modes+0xa0/0xd4
> [ 4.652273] drm_helper_probe_single_connector_modes+0x218/0x700
> [ 4.658266] drm_mode_getconnector+0x1b4/0x45c
> [ 4.662699] drm_ioctl_kernel+0xac/0x128
> [ 4.666611] drm_ioctl+0x268/0x410
> [ 4.670002] drm_compat_ioctl+0xdc/0xf0
> [ 4.673829] __arm64_compat_sys_ioctl+0xc8/0x100
> [ 4.678436] el0_svc_common+0xf4/0x1c0
> [ 4.682174] do_el0_svc_compat+0x28/0x3c
> [ 4.686088] el0_svc_compat+0x10/0x1c
> [ 4.689738] el0_sync_compat_handler+0xa8/0xcc
> [ 4.694171] el0_sync_compat+0x178/0x180
> [ 4.698082] ---[ end trace b4f2db9d9c88610b ]---
> [ 4.702721] ------------[ cut here ]------------
> [ 4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
> <snip>
> [ 4.833830] Call trace:
> [ 4.836266] drm_object_attach_property+0x48/0xb8
> [ 4.840958] drm_connector_set_panel_orientation+0x84/0xa0
> [ 4.846432] boe_panel_get_modes+0x88/0xd8
> [ 4.850516] drm_panel_get_modes+0x2c/0x48
> [ 4.854600] panel_bridge_get_modes+0x1c/0x28
> [ 4.858946] drm_bridge_connector_get_modes+0xa0/0xd4
> [ 4.863984] drm_helper_probe_single_connector_modes+0x218/0x700
> [ 4.869978] drm_mode_getconnector+0x1b4/0x45c
> [ 4.874410] drm_ioctl_kernel+0xac/0x128
> [ 4.878320] drm_ioctl+0x268/0x410
> [ 4.881711] drm_compat_ioctl+0xdc/0xf0
> [ 4.885536] __arm64_compat_sys_ioctl+0xc8/0x100
> [ 4.890142] el0_svc_common+0xf4/0x1c0
> [ 4.893879] do_el0_svc_compat+0x28/0x3c
> [ 4.897791] el0_svc_compat+0x10/0x1c
> [ 4.901441] el0_sync_compat_handler+0xa8/0xcc
> [ 4.905873] el0_sync_compat+0x178/0x180
> [ 4.909783] ---[ end trace b4f2db9d9c88610c ]---
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Hi maintainers,
Can you help review with this patch? Thanks
> ---
> v6, v5:
> don't create property in set_panel_orientation.
>
> v4, v3:
> create property in dsi driver and set value in panel.
>
> v2:
> create property in connector init
> https://patchwork.kernel.org/project/linux-mediatek/patch/20210426051848.2600890-1-hsinyi@chromium.org/
>
> v1:
> set panel orientation in dsi driver
> https://patchwork.kernel.org/project/linux-mediatek/patch/20210409045314.3420733-1-hsinyi@chromium.org/
> ---
> drivers/gpu/drm/drm_connector.c | 58 ++++++++++++++++++-------
> drivers/gpu/drm/i915/display/icl_dsi.c | 1 +
> drivers/gpu/drm/i915/display/intel_dp.c | 1 +
> drivers/gpu/drm/i915/display/vlv_dsi.c | 1 +
> include/drm/drm_connector.h | 2 +
> 5 files changed, 47 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 7631f76e7f34..7189baaabf41 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1210,7 +1210,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
> * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
> * coordinates, so if userspace rotates the picture to adjust for
> * the orientation it must also apply the same transformation to the
> - * touchscreen input coordinates. This property is initialized by calling
> + * touchscreen input coordinates. This property value is set by calling
> * drm_connector_set_panel_orientation() or
> * drm_connector_set_panel_orientation_with_quirk()
> *
> @@ -2173,8 +2173,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
> * @connector: connector for which to set the panel-orientation property.
> * @panel_orientation: drm_panel_orientation value to set
> *
> - * This function sets the connector's panel_orientation and attaches
> - * a "panel orientation" property to the connector.
> + * This function sets the connector's panel_orientation value. If the property
> + * doesn't exist, it will return an error.
> *
> * Calling this function on a connector where the panel_orientation has
> * already been set is a no-op (e.g. the orientation has been overridden with
> @@ -2205,19 +2205,11 @@ int drm_connector_set_panel_orientation(
> info->panel_orientation = panel_orientation;
>
> prop = dev->mode_config.panel_orientation_property;
> - if (!prop) {
> - prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> - "panel orientation",
> - drm_panel_orientation_enum_list,
> - ARRAY_SIZE(drm_panel_orientation_enum_list));
> - if (!prop)
> - return -ENOMEM;
> -
> - dev->mode_config.panel_orientation_property = prop;
> - }
> + if (WARN_ON(!prop))
> + return -EINVAL;
>
> - drm_object_attach_property(&connector->base, prop,
> - info->panel_orientation);
> + drm_object_property_set_value(&connector->base, prop,
> + info->panel_orientation);
> return 0;
> }
> EXPORT_SYMBOL(drm_connector_set_panel_orientation);
> @@ -2225,7 +2217,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);
> /**
> * drm_connector_set_panel_orientation_with_quirk -
> * set the connector's panel_orientation after checking for quirks
> - * @connector: connector for which to init the panel-orientation property.
> + * @connector: connector for which to set the panel-orientation property.
> * @panel_orientation: drm_panel_orientation value to set
> * @width: width in pixels of the panel, used for panel quirk detection
> * @height: height in pixels of the panel, used for panel quirk detection
> @@ -2252,6 +2244,40 @@ int drm_connector_set_panel_orientation_with_quirk(
> }
> EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
>
> +/**
> + * drm_connector_init_panel_orientation_property -
> + * create the connector's panel orientation property
> + *
> + * This function attaches a "panel orientation" property to the connector
> + * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
> + *
> + * The value of the property can be set by drm_connector_set_panel_orientation()
> + * or drm_connector_set_panel_orientation_with_quirk() later.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_connector_init_panel_orientation_property(
> + struct drm_connector *connector)
> +{
> + struct drm_device *dev = connector->dev;
> + struct drm_property *prop;
> +
> + prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> + "panel orientation",
> + drm_panel_orientation_enum_list,
> + ARRAY_SIZE(drm_panel_orientation_enum_list));
> + if (!prop)
> + return -ENOMEM;
> +
> + dev->mode_config.panel_orientation_property = prop;
> + drm_object_attach_property(&connector->base, prop,
> + DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
> +
> int drm_connector_set_obj_prop(struct drm_mode_object *obj,
> struct drm_property *property,
> uint64_t value)
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 9282978060b0..5ac4538e4283 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> + drm_connector_init_panel_orientation_property(&connector->base);
> drm_connector_set_panel_orientation_with_quirk(&connector->base,
> intel_dsi_get_panel_orientation(connector),
> connector->panel.fixed_mode->hdisplay,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a5231ac3443a..f1d664e5abb2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> intel_panel_setup_backlight(connector, pipe);
>
> if (fixed_mode) {
> + drm_connector_init_panel_orientation_property(connector);
> drm_connector_set_panel_orientation_with_quirk(connector,
> dev_priv->vbt.orientation,
> fixed_mode->hdisplay, fixed_mode->vdisplay);
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index 9bee99fe5495..853855482af1 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> + drm_connector_init_panel_orientation_property(&connector->base);
> drm_connector_set_panel_orientation_with_quirk(
> &connector->base,
> intel_dsi_get_panel_orientation(connector),
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 1922b278ffad..4396c1c4a5db 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1696,6 +1696,8 @@ int drm_connector_set_panel_orientation_with_quirk(
> struct drm_connector *connector,
> enum drm_panel_orientation panel_orientation,
> int width, int height);
> +int drm_connector_init_panel_orientation_property(
> + struct drm_connector *connector);
> int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
> int min, int max);
>
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting
2021-04-29 4:28 [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting Hsin-Yi Wang
` (2 preceding siblings ...)
2021-05-18 4:32 ` [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting Hsin-Yi Wang
@ 2021-05-20 13:03 ` Sean Paul
3 siblings, 0 replies; 6+ messages in thread
From: Sean Paul @ 2021-05-20 13:03 UTC (permalink / raw)
To: Hsin-Yi Wang
Cc: dri-devel, Chun-Kuang Hu, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, LKML,
Rob Herring, Matthias Brugger, devicetree, linux-arm-kernel,
moderated list:ARM/Mediatek SoC support,
Intel Graphics Development
On Thu, Apr 29, 2021 at 12:28 AM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> drm_dev_register() sets connector->registration_state to
> DRM_CONNECTOR_REGISTERED and dev->registered to true. If
> drm_connector_set_panel_orientation() is first called after
> drm_dev_register(), it will fail several checks and results in following
> warning.
>
> Add a function to create panel orientation property and set default value
> to UNKNOWN, so drivers can call this function to init the property earlier
> , and let the panel set the real value later.
>
> [ 4.480976] ------------[ cut here ]------------
> [ 4.485603] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xb4/0xbc
> <snip>
> [ 4.609772] Call trace:
> [ 4.612208] __drm_mode_object_add+0xb4/0xbc
> [ 4.616466] drm_mode_object_add+0x20/0x2c
> [ 4.620552] drm_property_create+0xdc/0x174
> [ 4.624723] drm_property_create_enum+0x34/0x98
> [ 4.629241] drm_connector_set_panel_orientation+0x64/0xa0
> [ 4.634716] boe_panel_get_modes+0x88/0xd8
> [ 4.638802] drm_panel_get_modes+0x2c/0x48
> [ 4.642887] panel_bridge_get_modes+0x1c/0x28
> [ 4.647233] drm_bridge_connector_get_modes+0xa0/0xd4
> [ 4.652273] drm_helper_probe_single_connector_modes+0x218/0x700
> [ 4.658266] drm_mode_getconnector+0x1b4/0x45c
> [ 4.662699] drm_ioctl_kernel+0xac/0x128
> [ 4.666611] drm_ioctl+0x268/0x410
> [ 4.670002] drm_compat_ioctl+0xdc/0xf0
> [ 4.673829] __arm64_compat_sys_ioctl+0xc8/0x100
> [ 4.678436] el0_svc_common+0xf4/0x1c0
> [ 4.682174] do_el0_svc_compat+0x28/0x3c
> [ 4.686088] el0_svc_compat+0x10/0x1c
> [ 4.689738] el0_sync_compat_handler+0xa8/0xcc
> [ 4.694171] el0_sync_compat+0x178/0x180
> [ 4.698082] ---[ end trace b4f2db9d9c88610b ]---
> [ 4.702721] ------------[ cut here ]------------
> [ 4.707329] WARNING: CPU: 5 PID: 369 at drivers/gpu/drm/drm_mode_object.c:243 drm_object_attach_property+0x48/0xb8
> <snip>
> [ 4.833830] Call trace:
> [ 4.836266] drm_object_attach_property+0x48/0xb8
> [ 4.840958] drm_connector_set_panel_orientation+0x84/0xa0
> [ 4.846432] boe_panel_get_modes+0x88/0xd8
> [ 4.850516] drm_panel_get_modes+0x2c/0x48
> [ 4.854600] panel_bridge_get_modes+0x1c/0x28
> [ 4.858946] drm_bridge_connector_get_modes+0xa0/0xd4
> [ 4.863984] drm_helper_probe_single_connector_modes+0x218/0x700
> [ 4.869978] drm_mode_getconnector+0x1b4/0x45c
> [ 4.874410] drm_ioctl_kernel+0xac/0x128
> [ 4.878320] drm_ioctl+0x268/0x410
> [ 4.881711] drm_compat_ioctl+0xdc/0xf0
> [ 4.885536] __arm64_compat_sys_ioctl+0xc8/0x100
> [ 4.890142] el0_svc_common+0xf4/0x1c0
> [ 4.893879] do_el0_svc_compat+0x28/0x3c
> [ 4.897791] el0_svc_compat+0x10/0x1c
> [ 4.901441] el0_sync_compat_handler+0xa8/0xcc
> [ 4.905873] el0_sync_compat+0x178/0x180
> [ 4.909783] ---[ end trace b4f2db9d9c88610c ]---
>
+intel-gfx for i915 changes
Reviewed-by: Sean Paul <seanpaul@chromium.org>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
> v6, v5:
> don't create property in set_panel_orientation.
>
> v4, v3:
> create property in dsi driver and set value in panel.
>
> v2:
> create property in connector init
> https://patchwork.kernel.org/project/linux-mediatek/patch/20210426051848.2600890-1-hsinyi@chromium.org/
>
> v1:
> set panel orientation in dsi driver
> https://patchwork.kernel.org/project/linux-mediatek/patch/20210409045314.3420733-1-hsinyi@chromium.org/
> ---
> drivers/gpu/drm/drm_connector.c | 58 ++++++++++++++++++-------
> drivers/gpu/drm/i915/display/icl_dsi.c | 1 +
> drivers/gpu/drm/i915/display/intel_dp.c | 1 +
> drivers/gpu/drm/i915/display/vlv_dsi.c | 1 +
> include/drm/drm_connector.h | 2 +
> 5 files changed, 47 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 7631f76e7f34..7189baaabf41 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1210,7 +1210,7 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
> * INPUT_PROP_DIRECT) will still map 1:1 to the actual LCD panel
> * coordinates, so if userspace rotates the picture to adjust for
> * the orientation it must also apply the same transformation to the
> - * touchscreen input coordinates. This property is initialized by calling
> + * touchscreen input coordinates. This property value is set by calling
> * drm_connector_set_panel_orientation() or
> * drm_connector_set_panel_orientation_with_quirk()
> *
> @@ -2173,8 +2173,8 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
> * @connector: connector for which to set the panel-orientation property.
> * @panel_orientation: drm_panel_orientation value to set
> *
> - * This function sets the connector's panel_orientation and attaches
> - * a "panel orientation" property to the connector.
> + * This function sets the connector's panel_orientation value. If the property
> + * doesn't exist, it will return an error.
> *
> * Calling this function on a connector where the panel_orientation has
> * already been set is a no-op (e.g. the orientation has been overridden with
> @@ -2205,19 +2205,11 @@ int drm_connector_set_panel_orientation(
> info->panel_orientation = panel_orientation;
>
> prop = dev->mode_config.panel_orientation_property;
> - if (!prop) {
> - prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> - "panel orientation",
> - drm_panel_orientation_enum_list,
> - ARRAY_SIZE(drm_panel_orientation_enum_list));
> - if (!prop)
> - return -ENOMEM;
> -
> - dev->mode_config.panel_orientation_property = prop;
> - }
> + if (WARN_ON(!prop))
> + return -EINVAL;
>
> - drm_object_attach_property(&connector->base, prop,
> - info->panel_orientation);
> + drm_object_property_set_value(&connector->base, prop,
> + info->panel_orientation);
> return 0;
> }
> EXPORT_SYMBOL(drm_connector_set_panel_orientation);
> @@ -2225,7 +2217,7 @@ EXPORT_SYMBOL(drm_connector_set_panel_orientation);
> /**
> * drm_connector_set_panel_orientation_with_quirk -
> * set the connector's panel_orientation after checking for quirks
> - * @connector: connector for which to init the panel-orientation property.
> + * @connector: connector for which to set the panel-orientation property.
> * @panel_orientation: drm_panel_orientation value to set
> * @width: width in pixels of the panel, used for panel quirk detection
> * @height: height in pixels of the panel, used for panel quirk detection
> @@ -2252,6 +2244,40 @@ int drm_connector_set_panel_orientation_with_quirk(
> }
> EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
>
> +/**
> + * drm_connector_init_panel_orientation_property -
> + * create the connector's panel orientation property
> + *
> + * This function attaches a "panel orientation" property to the connector
> + * and initializes its value to DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
> + *
> + * The value of the property can be set by drm_connector_set_panel_orientation()
> + * or drm_connector_set_panel_orientation_with_quirk() later.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_connector_init_panel_orientation_property(
> + struct drm_connector *connector)
> +{
> + struct drm_device *dev = connector->dev;
> + struct drm_property *prop;
> +
> + prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> + "panel orientation",
> + drm_panel_orientation_enum_list,
> + ARRAY_SIZE(drm_panel_orientation_enum_list));
> + if (!prop)
> + return -ENOMEM;
> +
> + dev->mode_config.panel_orientation_property = prop;
> + drm_object_attach_property(&connector->base, prop,
> + DRM_MODE_PANEL_ORIENTATION_UNKNOWN);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
> +
> int drm_connector_set_obj_prop(struct drm_mode_object *obj,
> struct drm_property *property,
> uint64_t value)
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 9282978060b0..5ac4538e4283 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1903,6 +1903,7 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> + drm_connector_init_panel_orientation_property(&connector->base);
> drm_connector_set_panel_orientation_with_quirk(&connector->base,
> intel_dsi_get_panel_orientation(connector),
> connector->panel.fixed_mode->hdisplay,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a5231ac3443a..f1d664e5abb2 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5263,6 +5263,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> intel_panel_setup_backlight(connector, pipe);
>
> if (fixed_mode) {
> + drm_connector_init_panel_orientation_property(connector);
> drm_connector_set_panel_orientation_with_quirk(connector,
> dev_priv->vbt.orientation,
> fixed_mode->hdisplay, fixed_mode->vdisplay);
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index 9bee99fe5495..853855482af1 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1632,6 +1632,7 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> + drm_connector_init_panel_orientation_property(&connector->base);
> drm_connector_set_panel_orientation_with_quirk(
> &connector->base,
> intel_dsi_get_panel_orientation(connector),
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 1922b278ffad..4396c1c4a5db 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1696,6 +1696,8 @@ int drm_connector_set_panel_orientation_with_quirk(
> struct drm_connector *connector,
> enum drm_panel_orientation panel_orientation,
> int width, int height);
> +int drm_connector_init_panel_orientation_property(
> + struct drm_connector *connector);
> int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
> int min, int max);
>
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-20 13:06 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-29 4:28 [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting Hsin-Yi Wang
2021-04-29 4:28 ` [PATCH v6 2/3] drm/mediatek: init panel orientation property Hsin-Yi Wang
2021-05-11 16:21 ` Chun-Kuang Hu
2021-04-29 4:28 ` [PATCH v6 3/3] arm64: dts: mt8183: Add panel rotation Hsin-Yi Wang
2021-05-18 4:32 ` [PATCH v6 1/3] gpu: drm: separate panel orientation property creating and value setting Hsin-Yi Wang
2021-05-20 13:03 ` Sean Paul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).