[PATCH v4 07/79] media: exynos-gsc: don't resume at remove time

[PATCH v4 07/79] media: exynos-gsc: don't resume at remove time

[Mauro Carvalho Chehab]

Calling pm_runtime_get_sync() at driver's removal time is not
needed, as this will resume PM runtime. Also, the PM runtime
code at pm_runtime_disable() already calls it, if it detects
the need.

So, change the logic in order to disable PM runtime earlier.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/exynos-gsc/gsc-core.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
index 9f41c2e7097a..8b943075c503 100644
--- a/drivers/media/platform/exynos-gsc/gsc-core.c
+++ b/drivers/media/platform/exynos-gsc/gsc-core.c
@@ -1210,18 +1210,19 @@ static int gsc_remove(struct platform_device *pdev)
 	struct gsc_dev *gsc = platform_get_drvdata(pdev);
 	int i;
 
-	pm_runtime_get_sync(&pdev->dev);
-
 	gsc_unregister_m2m_device(gsc);
 	v4l2_device_unregister(&gsc->v4l2_dev);
 
 	vb2_dma_contig_clear_max_seg_size(&pdev->dev);
-	for (i = 0; i < gsc->num_clocks; i++)
-		clk_disable_unprepare(gsc->clock[i]);
 
-	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
+	if (!pm_runtime_status_suspended(dev))
+		for (i = 0; i < gsc->num_clocks; i++)
+			clk_disable_unprepare(gsc->clock[i]);
+
+	pm_runtime_set_suspended(dev);
+
 	dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name);
 	return 0;
 }
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 08/79] media: atmel: properly get pm_runtime

[Mauro Carvalho Chehab]

There are several issues in the way the atmel driver handles
pm_runtime_get_sync():

- it doesn't check return codes;
- it doesn't properly decrement the usage_count on all places;
- it starts streaming even if pm_runtime_get_sync() fails.
- while it tries to get pm_runtime at the clock enable logic,
  it doesn't check if the operation was suceeded.

Replace all occurrences of it to use the new kAPI:
pm_runtime_resume_and_get(), which ensures that, if the
return code is not negative, the usage_count was incremented.

With that, add additional checks when this is called, in order
to ensure that errors will be properly addressed.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/atmel/atmel-isc-base.c | 27 ++++++++++++++-----
 drivers/media/platform/atmel/atmel-isi.c      | 19 ++++++++++---
 2 files changed, 35 insertions(+), 11 deletions(-)

diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
index fe3ec8d0eaee..02543fe42e9d 100644
--- a/drivers/media/platform/atmel/atmel-isc-base.c
+++ b/drivers/media/platform/atmel/atmel-isc-base.c
@@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw)
 static int isc_clk_prepare(struct clk_hw *hw)
 {
 	struct isc_clk *isc_clk = to_isc_clk(hw);
+	int ret;
 
-	if (isc_clk->id == ISC_ISPCK)
-		pm_runtime_get_sync(isc_clk->dev);
+	if (isc_clk->id == ISC_ISPCK) {
+		ret = pm_runtime_resume_and_get(isc_clk->dev);
+		if (ret < 0)
+			return 0;
+	}
 
 	return isc_wait_clk_stable(hw);
 }
@@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw)
 {
 	struct isc_clk *isc_clk = to_isc_clk(hw);
 	u32 status;
+	int ret;
 
-	if (isc_clk->id == ISC_ISPCK)
-		pm_runtime_get_sync(isc_clk->dev);
+	if (isc_clk->id == ISC_ISPCK) {
+		ret = pm_runtime_resume_and_get(isc_clk->dev);
+		if (ret < 0)
+			return 0;
+	}
 
 	regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
 
@@ -807,7 +815,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
 		goto err_start_stream;
 	}
 
-	pm_runtime_get_sync(isc->dev);
+	ret = pm_runtime_resume_and_get(isc->dev);
+	if (ret < 0)
+		goto err_pm_get;
 
 	ret = isc_configure(isc);
 	if (unlikely(ret))
@@ -838,7 +848,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 err_configure:
 	pm_runtime_put_sync(isc->dev);
-
+err_pm_get:
 	v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
 
 err_start_stream:
@@ -1809,6 +1819,7 @@ static void isc_awb_work(struct work_struct *w)
 	u32 baysel;
 	unsigned long flags;
 	u32 min, max;
+	int ret;
 
 	/* streaming is not active anymore */
 	if (isc->stop)
@@ -1831,7 +1842,9 @@ static void isc_awb_work(struct work_struct *w)
 	ctrls->hist_id = hist_id;
 	baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
 
-	pm_runtime_get_sync(isc->dev);
+	ret = pm_runtime_resume_and_get(isc->dev);
+	if (ret < 0)
+		return;
 
 	/*
 	 * only update if we have all the required histograms and controls
diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
index 0514be6153df..6a433926726d 100644
--- a/drivers/media/platform/atmel/atmel-isi.c
+++ b/drivers/media/platform/atmel/atmel-isi.c
@@ -422,7 +422,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
 	struct frame_buffer *buf, *node;
 	int ret;
 
-	pm_runtime_get_sync(isi->dev);
+	ret = pm_runtime_resume_and_get(isi->dev);
+	if (ret < 0)
+		return ret;
 
 	/* Enable stream on the sub device */
 	ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1);
@@ -782,9 +784,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh,
 	return 0;
 }
 
-static void isi_camera_set_bus_param(struct atmel_isi *isi)
+static int isi_camera_set_bus_param(struct atmel_isi *isi)
 {
 	u32 cfg1 = 0;
+	int ret;
 
 	/* set bus param for ISI */
 	if (isi->pdata.hsync_act_low)
@@ -801,12 +804,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi)
 	cfg1 |= ISI_CFG1_THMASK_BEATS_16;
 
 	/* Enable PM and peripheral clock before operate isi registers */
-	pm_runtime_get_sync(isi->dev);
+	ret = pm_runtime_resume_and_get(isi->dev);
+	if (ret < 0)
+		return ret;
 
 	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
 	isi_writel(isi, ISI_CFG1, cfg1);
 
 	pm_runtime_put(isi->dev);
+
+	return 0;
 }
 
 /* -----------------------------------------------------------------------*/
@@ -1085,7 +1092,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier)
 		dev_err(isi->dev, "No supported mediabus format found\n");
 		return ret;
 	}
-	isi_camera_set_bus_param(isi);
+	ret = isi_camera_set_bus_param(isi);
+	if (ret) {
+		dev_err(isi->dev, "Can't wake up device\n");
+		return ret;
+	}
 
 	ret = isi_set_default_fmt(isi);
 	if (ret) {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 10/79] media: mdk-mdp: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
as it doesn't make any sense to return 0 if the PM runtime failed
to resume.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
index ace4528cdc5e..f14779e7596e 100644
--- a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
+++ b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
@@ -391,12 +391,12 @@ static int mtk_mdp_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct mtk_mdp_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->mdp_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->mdp_dev->pdev->dev);
 	if (ret < 0)
-		mtk_mdp_dbg(1, "[%d] pm_runtime_get_sync failed:%d",
+		mtk_mdp_dbg(1, "[%d] pm_runtime_resume_and_get failed:%d",
 			    ctx->id, ret);
 
-	return 0;
+	return ret;
 }
 
 static void *mtk_mdp_m2m_buf_remove(struct mtk_mdp_ctx *ctx,
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 16/79] media: mtk-vcodec: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
index ddee7046ce42..fe096fe61c9d 100644
--- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
+++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
@@ -92,9 +92,9 @@ void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
 {
 	int ret;
 
-	ret = pm_runtime_get_sync(pm->dev);
+	ret = pm_runtime_resume_and_get(pm->dev);
 	if (ret)
-		mtk_v4l2_err("pm_runtime_get_sync fail %d", ret);
+		mtk_v4l2_err("pm_runtime_resume_and_get fail %d", ret);
 }
 
 void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm)
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 17/79] media: s5p-jpeg: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/s5p-jpeg/jpeg-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c
index 026111505f5a..c4f19418a460 100644
--- a/drivers/media/platform/s5p-jpeg/jpeg-core.c
+++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c
@@ -2568,7 +2568,7 @@ static int s5p_jpeg_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct s5p_jpeg_ctx *ctx = vb2_get_drv_priv(q);
 	int ret;
 
-	ret = pm_runtime_get_sync(ctx->jpeg->dev);
+	ret = pm_runtime_resume_and_get(ctx->jpeg->dev);
 
 	return ret > 0 ? 0 : ret;
 }
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 19/79] media: sunxi: fix pm_runtime_get_sync() usage count

[Mauro Carvalho Chehab]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter and avoid memory
leaks.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
index 3f81dd17755c..fbcca59a0517 100644
--- a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
+++ b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
@@ -494,7 +494,7 @@ static int rotate_start_streaming(struct vb2_queue *vq, unsigned int count)
 		struct device *dev = ctx->dev->dev;
 		int ret;
 
-		ret = pm_runtime_get_sync(dev);
+		ret = pm_runtime_resume_and_get(dev);
 		if (ret < 0) {
 			dev_err(dev, "Failed to enable module\n");
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 22/79] staging: media: imx7-mipi-csis: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 025fdc488bd6..1dc680d94a46 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -695,11 +695,10 @@ static int mipi_csis_s_stream(struct v4l2_subdev *mipi_sd, int enable)
 
 		mipi_csis_clear_counters(state);
 
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		ret = v4l2_subdev_call(state->src_sd, core, s_power, 1);
 		if (ret < 0 && ret != -ENOIOCTLCMD)
 			goto done;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 24/79] staging: media: cedrus_video: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus_video.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
index b62eb8e84057..9ddd789d0b1f 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -490,11 +490,9 @@ static int cedrus_start_streaming(struct vb2_queue *vq, unsigned int count)
 	}
 
 	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
-		ret = pm_runtime_get_sync(dev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(dev->dev);
+		ret = pm_runtime_resume_and_get(dev->dev);
+		if (ret < 0)
 			goto err_cleanup;
-		}
 
 		if (dev->dec_ops[ctx->current_codec]->start) {
 			ret = dev->dec_ops[ctx->current_codec]->start(ctx);
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 57/79] media: rockchip/rga: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rockchip/rga/rga-buf.c | 3 +--
 drivers/media/platform/rockchip/rga/rga.c     | 4 +++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/rockchip/rga/rga-buf.c b/drivers/media/platform/rockchip/rga/rga-buf.c
index bf9a75b75083..81508ed5abf3 100644
--- a/drivers/media/platform/rockchip/rga/rga-buf.c
+++ b/drivers/media/platform/rockchip/rga/rga-buf.c
@@ -79,9 +79,8 @@ static int rga_buf_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct rockchip_rga *rga = ctx->rga;
 	int ret;
 
-	ret = pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(rga->dev);
 		rga_buf_return_buffers(q, VB2_BUF_STATE_QUEUED);
 		return ret;
 	}
diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index 9d122429706e..bf3fd71ec3af 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -866,7 +866,9 @@ static int rga_probe(struct platform_device *pdev)
 		goto unreg_video_dev;
 	}
 
-	pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
+	if (ret < 0)
+		goto unreg_video_dev;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 62/79] media: exynos4-is: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/exynos4-is/fimc-capture.c   | 6 ++----
 drivers/media/platform/exynos4-is/fimc-is.c        | 4 ++--
 drivers/media/platform/exynos4-is/fimc-isp-video.c | 3 +--
 drivers/media/platform/exynos4-is/fimc-isp.c       | 7 +++----
 drivers/media/platform/exynos4-is/fimc-lite.c      | 5 +++--
 drivers/media/platform/exynos4-is/fimc-m2m.c       | 2 +-
 drivers/media/platform/exynos4-is/media-dev.c      | 8 +++-----
 drivers/media/platform/exynos4-is/mipi-csis.c      | 8 +++-----
 8 files changed, 18 insertions(+), 25 deletions(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
index 13c838d3f947..0da36443173c 100644
--- a/drivers/media/platform/exynos4-is/fimc-capture.c
+++ b/drivers/media/platform/exynos4-is/fimc-capture.c
@@ -478,11 +478,9 @@ static int fimc_capture_open(struct file *file)
 		goto unlock;
 
 	set_bit(ST_CAPT_BUSY, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
+	if (ret < 0)
 		goto unlock;
-	}
 
 	ret = v4l2_fh_open(file);
 	if (ret) {
diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
index 972d9601d236..1b24f5bfc4af 100644
--- a/drivers/media/platform/exynos4-is/fimc-is.c
+++ b/drivers/media/platform/exynos4-is/fimc-is.c
@@ -828,9 +828,9 @@ static int fimc_is_probe(struct platform_device *pdev)
 			goto err_irq;
 	}
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_irq;
 
 	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
 
diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c
index 612b9872afc8..8d9dc597deaa 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
@@ -275,7 +275,7 @@ static int isp_video_open(struct file *file)
 	if (ret < 0)
 		goto unlock;
 
-	ret = pm_runtime_get_sync(&isp->pdev->dev);
+	ret = pm_runtime_resume_and_get(&isp->pdev->dev);
 	if (ret < 0)
 		goto rel_fh;
 
@@ -293,7 +293,6 @@ static int isp_video_open(struct file *file)
 	if (!ret)
 		goto unlock;
 rel_fh:
-	pm_runtime_put_noidle(&isp->pdev->dev);
 	v4l2_fh_release(file);
 unlock:
 	mutex_unlock(&isp->video_lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
index a77c49b18511..74b49d30901e 100644
--- a/drivers/media/platform/exynos4-is/fimc-isp.c
+++ b/drivers/media/platform/exynos4-is/fimc-isp.c
@@ -304,11 +304,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
 	pr_debug("on: %d\n", on);
 
 	if (on) {
-		ret = pm_runtime_get_sync(&is->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put(&is->pdev->dev);
+		ret = pm_runtime_resume_and_get(&is->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		set_bit(IS_ST_PWR_ON, &is->state);
 
 		ret = fimc_is_start_firmware(is);
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
index fe20af3a7178..4d8b18078ff3 100644
--- a/drivers/media/platform/exynos4-is/fimc-lite.c
+++ b/drivers/media/platform/exynos4-is/fimc-lite.c
@@ -469,9 +469,9 @@ static int fimc_lite_open(struct file *file)
 	}
 
 	set_bit(ST_FLITE_IN_USE, &fimc->state);
-	ret = pm_runtime_get_sync(&fimc->pdev->dev);
+	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
 	if (ret < 0)
-		goto err_pm;
+		goto err_in_use;
 
 	ret = v4l2_fh_open(file);
 	if (ret < 0)
@@ -499,6 +499,7 @@ static int fimc_lite_open(struct file *file)
 	v4l2_fh_release(file);
 err_pm:
 	pm_runtime_put_sync(&fimc->pdev->dev);
+err_in_use:
 	clear_bit(ST_FLITE_IN_USE, &fimc->state);
 unlock:
 	mutex_unlock(&fimc->lock);
diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c
index c9704a147e5c..7c1eb05c508f 100644
--- a/drivers/media/platform/exynos4-is/fimc-m2m.c
+++ b/drivers/media/platform/exynos4-is/fimc-m2m.c
@@ -75,7 +75,7 @@ static int start_streaming(struct vb2_queue *q, unsigned int count)
 	struct fimc_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->fimc_dev->pdev->dev);
 	return ret > 0 ? 0 : ret;
 }
 
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 13d192ba4aa6..9346d44a06c2 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -512,11 +512,9 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
 	if (!fmd->pmf)
 		return -ENXIO;
 
-	ret = pm_runtime_get_sync(fmd->pmf);
-	if (ret < 0) {
-		pm_runtime_put(fmd->pmf);
+	ret = pm_runtime_resume_and_get(fmd->pmf);
+	if (ret < 0)
 		return ret;
-	}
 
 	fmd->num_sensors = 0;
 
@@ -1291,7 +1289,7 @@ static int cam_clk_prepare(struct clk_hw *hw)
 	if (camclk->fmd->pmf == NULL)
 		return -ENODEV;
 
-	ret = pm_runtime_get_sync(camclk->fmd->pmf);
+	ret = pm_runtime_resume_and_get(camclk->fmd->pmf);
 	return ret < 0 ? ret : 0;
 }
 
diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
index 1aac167abb17..2a6afb78a049 100644
--- a/drivers/media/platform/exynos4-is/mipi-csis.c
+++ b/drivers/media/platform/exynos4-is/mipi-csis.c
@@ -494,7 +494,7 @@ static int s5pcsis_s_power(struct v4l2_subdev *sd, int on)
 	struct device *dev = &state->pdev->dev;
 
 	if (on)
-		return pm_runtime_get_sync(dev);
+		return pm_runtime_resume_and_get(dev);
 
 	return pm_runtime_put_sync(dev);
 }
@@ -509,11 +509,9 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
 
 	if (enable) {
 		s5pcsis_clear_counters(state);
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret && ret != 1) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret && ret != 1)
 			return ret;
-		}
 	}
 
 	mutex_lock(&state->lock);
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 63/79] media: exynos-gsc: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/exynos-gsc/gsc-m2m.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c
index 27a3c92c73bc..09551e96ac15 100644
--- a/drivers/media/platform/exynos-gsc/gsc-m2m.c
+++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c
@@ -58,7 +58,7 @@ static int gsc_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct gsc_ctx *ctx = q->drv_priv;
 	int ret;
 
-	ret = pm_runtime_get_sync(&ctx->gsc_dev->pdev->dev);
+	ret = pm_runtime_resume_and_get(&ctx->gsc_dev->pdev->dev);
 	return ret > 0 ? 0 : ret;
 }
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 64/79] media: mtk-jpeg: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index 88a23bce569d..a89c7b206eef 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -920,7 +920,7 @@ static void mtk_jpeg_enc_device_run(void *priv)
 	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
 
-	ret = pm_runtime_get_sync(jpeg->dev);
+	ret = pm_runtime_resume_and_get(jpeg->dev);
 	if (ret < 0)
 		goto enc_end;
 
@@ -973,7 +973,7 @@ static void mtk_jpeg_dec_device_run(void *priv)
 		return;
 	}
 
-	ret = pm_runtime_get_sync(jpeg->dev);
+	ret = pm_runtime_resume_and_get(jpeg->dev);
 	if (ret < 0)
 		goto dec_end;
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 70/79] media: rkisp1: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
index 5f6c9d1623e4..3730376897d9 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
@@ -1003,9 +1003,8 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
 	if (ret)
 		goto err_pipeline_stop;
 
-	ret = pm_runtime_get_sync(cap->rkisp1->dev);
+	ret = pm_runtime_resume_and_get(cap->rkisp1->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(cap->rkisp1->dev);
 		dev_err(cap->rkisp1->dev, "power up failed %d\n", ret);
 		goto err_destroy_dummy;
 	}
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 72/79] media: s5p-mfc: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
index 62d2320a7218..88b7d33c9197 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
@@ -78,11 +78,9 @@ int s5p_mfc_power_on(void)
 {
 	int i, ret = 0;
 
-	ret = pm_runtime_get_sync(pm->device);
-	if (ret < 0) {
-		pm_runtime_put_noidle(pm->device);
+	ret = pm_runtime_resume_and_get(pm->device);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* clock control */
 	for (i = 0; i < pm->num_clocks; i++) {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 73/79] media: stm32: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index bbcc2254fa2e..5f4e1db8cfcd 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -723,11 +723,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 	u32 val = 0;
 	int ret;
 
-	ret = pm_runtime_get_sync(dcmi->dev);
+	ret = pm_runtime_resume_and_get(dcmi->dev);
 	if (ret < 0) {
 		dev_err(dcmi->dev, "%s: Failed to start streaming, cannot get sync (%d)\n",
 			__func__, ret);
-		goto err_pm_put;
+		goto err_unlock;
 	}
 
 	ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline);
@@ -848,6 +848,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 err_pm_put:
 	pm_runtime_put(dcmi->dev);
+err_unlock:
 	spin_lock_irq(&dcmi->irqlock);
 	/*
 	 * Return all buffers to vb2 in QUEUED state.
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 74/79] media: sunxi: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
index 4785faddf630..54b909987caa 100644
--- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
+++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
@@ -206,9 +206,9 @@ static int sun4i_csi_open(struct file *file)
 	if (ret)
 		return ret;
 
-	ret = pm_runtime_get_sync(csi->dev);
+	ret = pm_runtime_resume_and_get(csi->dev);
 	if (ret < 0)
-		goto err_pm_put;
+		goto err_unlock;
 
 	ret = v4l2_pipeline_pm_get(&csi->vdev.entity);
 	if (ret)
@@ -227,6 +227,8 @@ static int sun4i_csi_open(struct file *file)
 
 err_pm_put:
 	pm_runtime_put(csi->dev);
+
+err_unlock:
 	mutex_unlock(&csi->lock);
 
 	return ret;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 07/79] media: exynos-gsc: don't resume at remove time

[Sylwester Nawrocki]

On 28.04.2021 16:51, Mauro Carvalho Chehab wrote:
> Calling pm_runtime_get_sync() at driver's removal time is not
> needed, as this will resume PM runtime. Also, the PM runtime
> code at pm_runtime_disable() already calls it, if it detects
> the need.
> 
> So, change the logic in order to disable PM runtime earlier.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Thank you for correcting that.

> ---
>  drivers/media/platform/exynos-gsc/gsc-core.c | 11 ++++++-----
>  1 file changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
> index 9f41c2e7097a..8b943075c503 100644
> --- a/drivers/media/platform/exynos-gsc/gsc-core.c
> +++ b/drivers/media/platform/exynos-gsc/gsc-core.c
> @@ -1210,18 +1210,19 @@ static int gsc_remove(struct platform_device *pdev)
>  	struct gsc_dev *gsc = platform_get_drvdata(pdev);
>  	int i;
>  
> -	pm_runtime_get_sync(&pdev->dev);
> -
>  	gsc_unregister_m2m_device(gsc);
>  	v4l2_device_unregister(&gsc->v4l2_dev);
>  
>  	vb2_dma_contig_clear_max_seg_size(&pdev->dev);
> -	for (i = 0; i < gsc->num_clocks; i++)
> -		clk_disable_unprepare(gsc->clock[i]);
>  
> -	pm_runtime_put_noidle(&pdev->dev);
>  	pm_runtime_disable(&pdev->dev);
> +	if (!pm_runtime_status_suspended(dev)) {

It should be &pdev->dev here rather than dev...

> +		for (i = 0; i < gsc->num_clocks; i++)
> +			clk_disable_unprepare(gsc->clock[i]);
> +	}
> +	pm_runtime_set_suspended(dev);

and here s/dev/&pdev->dev.

With above issues fixed,
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

>  	dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name);
>  	return 0;
>  }
 

Thanks,
Sylwester

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 57/79] media: rockchip/rga: use pm_runtime_resume_and_get()

[Ezequiel Garcia]

On Wed, 2021-04-28 at 16:52 +0200, Mauro Carvalho Chehab wrote:
> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Ugh, sigh... OK, there was a v4. Sorry for the noise!

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>

> ---
>  drivers/media/platform/rockchip/rga/rga-buf.c | 3 +--
>  drivers/media/platform/rockchip/rga/rga.c     | 4 +++-
>  2 files changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/platform/rockchip/rga/rga-buf.c b/drivers/media/platform/rockchip/rga/rga-buf.c
> index bf9a75b75083..81508ed5abf3 100644
> --- a/drivers/media/platform/rockchip/rga/rga-buf.c
> +++ b/drivers/media/platform/rockchip/rga/rga-buf.c
> @@ -79,9 +79,8 @@ static int rga_buf_start_streaming(struct vb2_queue *q, unsigned int count)
>         struct rockchip_rga *rga = ctx->rga;
>         int ret;
>  
> -       ret = pm_runtime_get_sync(rga->dev);
> +       ret = pm_runtime_resume_and_get(rga->dev);
>         if (ret < 0) {
> -               pm_runtime_put_noidle(rga->dev);
>                 rga_buf_return_buffers(q, VB2_BUF_STATE_QUEUED);
>                 return ret;
>         }
> diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
> index 9d122429706e..bf3fd71ec3af 100644
> --- a/drivers/media/platform/rockchip/rga/rga.c
> +++ b/drivers/media/platform/rockchip/rga/rga.c
> @@ -866,7 +866,9 @@ static int rga_probe(struct platform_device *pdev)
>                 goto unreg_video_dev;
>         }
>  
> -       pm_runtime_get_sync(rga->dev);
> +       ret = pm_runtime_resume_and_get(rga->dev);
> +       if (ret < 0)
> +               goto unreg_video_dev;
>  
>         rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
>         rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 07/79] media: exynos-gsc: don't resume at remove time

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2819 bytes --]

Hi Mauro,

I love your patch! Yet something to improve:

[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on rockchip/for-next tegra/for-next v5.12 next-20210428]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Mauro-Carvalho-Chehab/Address-some-issues-with-PM-runtime-at-media-subsystem/20210428-225742
base:   git://linuxtv.org/media_tree.git master
config: nds32-randconfig-r035-20210428 (attached as .config)
compiler: nds32le-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/b6dba4aea621c15b0aa6f92e548c74cd6994eb20
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Mauro-Carvalho-Chehab/Address-some-issues-with-PM-runtime-at-media-subsystem/20210428-225742
        git checkout b6dba4aea621c15b0aa6f92e548c74cd6994eb20
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=nds32 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/media/platform/exynos-gsc/gsc-core.c: In function 'gsc_remove':
>> drivers/media/platform/exynos-gsc/gsc-core.c:1220:35: error: 'dev' undeclared (first use in this function); did you mean 'pdev'?
    1220 |  if (!pm_runtime_status_suspended(dev))
         |                                   ^~~
         |                                   pdev
   drivers/media/platform/exynos-gsc/gsc-core.c:1220:35: note: each undeclared identifier is reported only once for each function it appears in


vim +1220 drivers/media/platform/exynos-gsc/gsc-core.c

  1207	
  1208	static int gsc_remove(struct platform_device *pdev)
  1209	{
  1210		struct gsc_dev *gsc = platform_get_drvdata(pdev);
  1211		int i;
  1212	
  1213		gsc_unregister_m2m_device(gsc);
  1214		v4l2_device_unregister(&gsc->v4l2_dev);
  1215	
  1216		vb2_dma_contig_clear_max_seg_size(&pdev->dev);
  1217	
  1218		pm_runtime_disable(&pdev->dev);
  1219	
> 1220		if (!pm_runtime_status_suspended(dev))
  1221			for (i = 0; i < gsc->num_clocks; i++)
  1222				clk_disable_unprepare(gsc->clock[i]);
  1223	
  1224		pm_runtime_set_suspended(dev);
  1225	
  1226		dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name);
  1227		return 0;
  1228	}
  1229	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 37801 bytes --]

[-- Attachment #3: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 07/79] media: exynos-gsc: don't resume at remove time

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2802 bytes --]

Hi Mauro,

I love your patch! Yet something to improve:

[auto build test ERROR on linuxtv-media/master]
[also build test ERROR on rockchip/for-next tegra/for-next v5.12 next-20210428]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Mauro-Carvalho-Chehab/Address-some-issues-with-PM-runtime-at-media-subsystem/20210428-225742
base:   git://linuxtv.org/media_tree.git master
config: ia64-allmodconfig (attached as .config)
compiler: ia64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/b6dba4aea621c15b0aa6f92e548c74cd6994eb20
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Mauro-Carvalho-Chehab/Address-some-issues-with-PM-runtime-at-media-subsystem/20210428-225742
        git checkout b6dba4aea621c15b0aa6f92e548c74cd6994eb20
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=ia64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   drivers/media/platform/exynos-gsc/gsc-core.c: In function 'gsc_remove':
>> drivers/media/platform/exynos-gsc/gsc-core.c:1220:35: error: 'dev' undeclared (first use in this function); did you mean 'pdev'?
    1220 |  if (!pm_runtime_status_suspended(dev))
         |                                   ^~~
         |                                   pdev
   drivers/media/platform/exynos-gsc/gsc-core.c:1220:35: note: each undeclared identifier is reported only once for each function it appears in


vim +1220 drivers/media/platform/exynos-gsc/gsc-core.c

  1207	
  1208	static int gsc_remove(struct platform_device *pdev)
  1209	{
  1210		struct gsc_dev *gsc = platform_get_drvdata(pdev);
  1211		int i;
  1212	
  1213		gsc_unregister_m2m_device(gsc);
  1214		v4l2_device_unregister(&gsc->v4l2_dev);
  1215	
  1216		vb2_dma_contig_clear_max_seg_size(&pdev->dev);
  1217	
  1218		pm_runtime_disable(&pdev->dev);
  1219	
> 1220		if (!pm_runtime_status_suspended(dev))
  1221			for (i = 0; i < gsc->num_clocks; i++)
  1222				clk_disable_unprepare(gsc->clock[i]);
  1223	
  1224		pm_runtime_set_suspended(dev);
  1225	
  1226		dev_dbg(&pdev->dev, "%s driver unloaded\n", pdev->name);
  1227		return 0;
  1228	}
  1229	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 63872 bytes --]

[-- Attachment #3: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 08/79] media: atmel: properly get pm_runtime

[Jonathan Cameron]

On Wed, 28 Apr 2021 16:51:29 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> There are several issues in the way the atmel driver handles
> pm_runtime_get_sync():
> 
> - it doesn't check return codes;
> - it doesn't properly decrement the usage_count on all places;
> - it starts streaming even if pm_runtime_get_sync() fails.
> - while it tries to get pm_runtime at the clock enable logic,
>   it doesn't check if the operation was suceeded.
> 
> Replace all occurrences of it to use the new kAPI:
> pm_runtime_resume_and_get(), which ensures that, if the
> return code is not negative, the usage_count was incremented.
> 
> With that, add additional checks when this is called, in order
> to ensure that errors will be properly addressed.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  drivers/media/platform/atmel/atmel-isc-base.c | 27 ++++++++++++++-----
>  drivers/media/platform/atmel/atmel-isi.c      | 19 ++++++++++---
>  2 files changed, 35 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
> index fe3ec8d0eaee..02543fe42e9d 100644
> --- a/drivers/media/platform/atmel/atmel-isc-base.c
> +++ b/drivers/media/platform/atmel/atmel-isc-base.c
> @@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw)
>  static int isc_clk_prepare(struct clk_hw *hw)
>  {
>  	struct isc_clk *isc_clk = to_isc_clk(hw);
> +	int ret;
>  
> -	if (isc_clk->id == ISC_ISPCK)
> -		pm_runtime_get_sync(isc_clk->dev);
> +	if (isc_clk->id == ISC_ISPCK) {
> +		ret = pm_runtime_resume_and_get(isc_clk->dev);
> +		if (ret < 0)
> +			return 0;

Why not the error?  isc_wait_clk_stable() is happy to return -ETIMEDOUT so I
assume the callers should fine with errors.

> +	}
>  
>  	return isc_wait_clk_stable(hw);
>  }
> @@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw)
>  {
>  	struct isc_clk *isc_clk = to_isc_clk(hw);
>  	u32 status;
> +	int ret;
>  
> -	if (isc_clk->id == ISC_ISPCK)
> -		pm_runtime_get_sync(isc_clk->dev);
> +	if (isc_clk->id == ISC_ISPCK) {
> +		ret = pm_runtime_resume_and_get(isc_clk->dev);
> +		if (ret < 0)
> +			return 0;
> +	}
>  
>  	regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
>  
> @@ -807,7 +815,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
>  		goto err_start_stream;
>  	}
>  
> -	pm_runtime_get_sync(isc->dev);
> +	ret = pm_runtime_resume_and_get(isc->dev);
> +	if (ret < 0)
> +		goto err_pm_get;
>  
>  	ret = isc_configure(isc);
>  	if (unlikely(ret))
> @@ -838,7 +848,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
>  
>  err_configure:
>  	pm_runtime_put_sync(isc->dev);
> -
> +err_pm_get:
>  	v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
>  
>  err_start_stream:
> @@ -1809,6 +1819,7 @@ static void isc_awb_work(struct work_struct *w)
>  	u32 baysel;
>  	unsigned long flags;
>  	u32 min, max;
> +	int ret;
>  
>  	/* streaming is not active anymore */
>  	if (isc->stop)
> @@ -1831,7 +1842,9 @@ static void isc_awb_work(struct work_struct *w)
>  	ctrls->hist_id = hist_id;
>  	baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
>  
> -	pm_runtime_get_sync(isc->dev);
> +	ret = pm_runtime_resume_and_get(isc->dev);
> +	if (ret < 0)

Maybe warn or similar?

> +		return;
>  
>  	/*
>  	 * only update if we have all the required histograms and controls
> diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
> index 0514be6153df..6a433926726d 100644
> --- a/drivers/media/platform/atmel/atmel-isi.c
> +++ b/drivers/media/platform/atmel/atmel-isi.c
> @@ -422,7 +422,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
>  	struct frame_buffer *buf, *node;
>  	int ret;
>  
> -	pm_runtime_get_sync(isi->dev);
> +	ret = pm_runtime_resume_and_get(isi->dev);
> +	if (ret < 0)
> +		return ret;
>  
>  	/* Enable stream on the sub device */
>  	ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1);
> @@ -782,9 +784,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh,
>  	return 0;
>  }
>  
> -static void isi_camera_set_bus_param(struct atmel_isi *isi)
> +static int isi_camera_set_bus_param(struct atmel_isi *isi)
>  {
>  	u32 cfg1 = 0;
> +	int ret;
>  
>  	/* set bus param for ISI */
>  	if (isi->pdata.hsync_act_low)
> @@ -801,12 +804,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi)
>  	cfg1 |= ISI_CFG1_THMASK_BEATS_16;
>  
>  	/* Enable PM and peripheral clock before operate isi registers */
> -	pm_runtime_get_sync(isi->dev);
> +	ret = pm_runtime_resume_and_get(isi->dev);
> +	if (ret < 0)
> +		return ret;
>  
>  	isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
>  	isi_writel(isi, ISI_CFG1, cfg1);
>  
>  	pm_runtime_put(isi->dev);
> +
> +	return 0;
>  }
>  
>  /* -----------------------------------------------------------------------*/
> @@ -1085,7 +1092,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier)
>  		dev_err(isi->dev, "No supported mediabus format found\n");
>  		return ret;
>  	}
> -	isi_camera_set_bus_param(isi);
> +	ret = isi_camera_set_bus_param(isi);
> +	if (ret) {
> +		dev_err(isi->dev, "Can't wake up device\n");
> +		return ret;
> +	}
>  
>  	ret = isi_set_default_fmt(isi);
>  	if (ret) {


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 10/79] media: mdk-mdp: fix pm_runtime_get_sync() usage count

[Jonathan Cameron]

On Wed, 28 Apr 2021 16:51:31 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> The pm_runtime_get_sync() internally increments the
> dev->power.usage_count without decrementing it, even on errors.
> Replace it by the new pm_runtime_resume_and_get(), introduced by:
> commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> in order to properly decrement the usage counter and avoid memory
> leaks.
> 
> While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
> as it doesn't make any sense to return 0 if the PM runtime failed
> to resume.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
> index ace4528cdc5e..f14779e7596e 100644
> --- a/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
> +++ b/drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
> @@ -391,12 +391,12 @@ static int mtk_mdp_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
>  	struct mtk_mdp_ctx *ctx = q->drv_priv;
>  	int ret;
>  
> -	ret = pm_runtime_get_sync(&ctx->mdp_dev->pdev->dev);
> +	ret = pm_runtime_resume_and_get(&ctx->mdp_dev->pdev->dev);
>  	if (ret < 0)
> -		mtk_mdp_dbg(1, "[%d] pm_runtime_get_sync failed:%d",
> +		mtk_mdp_dbg(1, "[%d] pm_runtime_resume_and_get failed:%d",
>  			    ctx->id, ret);
>  
> -	return 0;
> +	return ret;
>  }
>  
>  static void *mtk_mdp_m2m_buf_remove(struct mtk_mdp_ctx *ctx,


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 16/79] media: mtk-vcodec: fix pm_runtime_get_sync() usage count

[Jonathan Cameron]

On Wed, 28 Apr 2021 16:51:37 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> The pm_runtime_get_sync() internally increments the
> dev->power.usage_count without decrementing it, even on errors.
> Replace it by the new pm_runtime_resume_and_get(), introduced by:
> commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> in order to properly decrement the usage counter and avoid memory
> leaks.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Without a return value, this seems like it's not complete as driver
will carry on and eventually call mtk_vcode_dec_pw_off() which will assume
it needs to decrement the count.


> ---
>  drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> index ddee7046ce42..fe096fe61c9d 100644
> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> @@ -92,9 +92,9 @@ void mtk_vcodec_dec_pw_on(struct mtk_vcodec_pm *pm)
>  {
>  	int ret;
>  
> -	ret = pm_runtime_get_sync(pm->dev);
> +	ret = pm_runtime_resume_and_get(pm->dev);
>  	if (ret)
> -		mtk_v4l2_err("pm_runtime_get_sync fail %d", ret);
> +		mtk_v4l2_err("pm_runtime_resume_and_get fail %d", ret);
>  }
>  
>  void mtk_vcodec_dec_pw_off(struct mtk_vcodec_pm *pm)


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 19/79] media: sunxi: fix pm_runtime_get_sync() usage count

[Jonathan Cameron]

On Wed, 28 Apr 2021 16:51:40 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> The pm_runtime_get_sync() internally increments the
> dev->power.usage_count without decrementing it, even on errors.
> Replace it by the new pm_runtime_resume_and_get(), introduced by:
> commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> in order to properly decrement the usage counter and avoid memory
> leaks.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
> index 3f81dd17755c..fbcca59a0517 100644
> --- a/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
> +++ b/drivers/media/platform/sunxi/sun8i-rotate/sun8i_rotate.c
> @@ -494,7 +494,7 @@ static int rotate_start_streaming(struct vb2_queue *vq, unsigned int count)
>  		struct device *dev = ctx->dev->dev;
>  		int ret;
>  
> -		ret = pm_runtime_get_sync(dev);
> +		ret = pm_runtime_resume_and_get(dev);
>  		if (ret < 0) {
>  			dev_err(dev, "Failed to enable module\n");
>  


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 24/79] staging: media: cedrus_video: use pm_runtime_resume_and_get()

[Jonathan Cameron]

On Wed, 28 Apr 2021 16:51:45 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

> ---
>  drivers/staging/media/sunxi/cedrus/cedrus_video.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
> index b62eb8e84057..9ddd789d0b1f 100644
> --- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
> +++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
> @@ -490,11 +490,9 @@ static int cedrus_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	}
>  
>  	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
> -		ret = pm_runtime_get_sync(dev->dev);
> -		if (ret < 0) {
> -			pm_runtime_put_noidle(dev->dev);
> +		ret = pm_runtime_resume_and_get(dev->dev);
> +		if (ret < 0)
>  			goto err_cleanup;
> -		}
>  
>  		if (dev->dec_ops[ctx->current_codec]->start) {
>  			ret = dev->dec_ops[ctx->current_codec]->start(ctx);


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 62/79] media: exynos4-is: use pm_runtime_resume_and_get()

[Jonathan Cameron]

On Wed, 28 Apr 2021 16:52:23 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  drivers/media/platform/exynos4-is/fimc-capture.c   | 6 ++----
>  drivers/media/platform/exynos4-is/fimc-is.c        | 4 ++--
>  drivers/media/platform/exynos4-is/fimc-isp-video.c | 3 +--
>  drivers/media/platform/exynos4-is/fimc-isp.c       | 7 +++----
>  drivers/media/platform/exynos4-is/fimc-lite.c      | 5 +++--
>  drivers/media/platform/exynos4-is/fimc-m2m.c       | 2 +-
>  drivers/media/platform/exynos4-is/media-dev.c      | 8 +++-----
>  drivers/media/platform/exynos4-is/mipi-csis.c      | 8 +++-----
>  8 files changed, 18 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/media/platform/exynos4-is/fimc-capture.c b/drivers/media/platform/exynos4-is/fimc-capture.c
> index 13c838d3f947..0da36443173c 100644
> --- a/drivers/media/platform/exynos4-is/fimc-capture.c
> +++ b/drivers/media/platform/exynos4-is/fimc-capture.c
> @@ -478,11 +478,9 @@ static int fimc_capture_open(struct file *file)
>  		goto unlock;
>  
>  	set_bit(ST_CAPT_BUSY, &fimc->state);
> -	ret = pm_runtime_get_sync(&fimc->pdev->dev);
> -	if (ret < 0) {
> -		pm_runtime_put_sync(&fimc->pdev->dev);
> +	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
> +	if (ret < 0)
>  		goto unlock;
> -	}
>  
>  	ret = v4l2_fh_open(file);
>  	if (ret) {
> diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c
> index 972d9601d236..1b24f5bfc4af 100644
> --- a/drivers/media/platform/exynos4-is/fimc-is.c
> +++ b/drivers/media/platform/exynos4-is/fimc-is.c
> @@ -828,9 +828,9 @@ static int fimc_is_probe(struct platform_device *pdev)
>  			goto err_irq;
>  	}
>  
> -	ret = pm_runtime_get_sync(dev);
> +	ret = pm_runtime_resume_and_get(dev);
>  	if (ret < 0)
> -		goto err_pm;
> +		goto err_irq;
>  

I think the pm_runtime_put_noidle() below err_pm: should become
a pm_runtime_put() because otherwise we won't call fimc_is_runtime_suspend()
if runtime pm is enabled (either directly or via runtime pm count becoming zero.

(not I'm not 100% sure of my argument here...)

>  	vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
>  
> diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c
> index 612b9872afc8..8d9dc597deaa 100644
> --- a/drivers/media/platform/exynos4-is/fimc-isp-video.c
> +++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c
> @@ -275,7 +275,7 @@ static int isp_video_open(struct file *file)
>  	if (ret < 0)
>  		goto unlock;
>  
> -	ret = pm_runtime_get_sync(&isp->pdev->dev);
> +	ret = pm_runtime_resume_and_get(&isp->pdev->dev);
>  	if (ret < 0)
>  		goto rel_fh;
>  
> @@ -293,7 +293,6 @@ static int isp_video_open(struct file *file)
>  	if (!ret)
>  		goto unlock;

So the good path is to jump over the block.  I'd just unlock and return here
to make it more readable but unrelated to this patch.

>  rel_fh:
> -	pm_runtime_put_noidle(&isp->pdev->dev);

Logic flow here isn't very standard, but with this change, you'll not
call anything to unwind a successful call to pm_runtime_resume_and_get if
fmic_pipeline_call() returns and error.
My guess is pm_runtime_put_sync() is needed before rel_fh; to balance this.
 
>  	v4l2_fh_release(file);
>  unlock:
>  	mutex_unlock(&isp->video_lock);
> diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c
> index a77c49b18511..74b49d30901e 100644
> --- a/drivers/media/platform/exynos4-is/fimc-isp.c
> +++ b/drivers/media/platform/exynos4-is/fimc-isp.c
> @@ -304,11 +304,10 @@ static int fimc_isp_subdev_s_power(struct v4l2_subdev *sd, int on)
>  	pr_debug("on: %d\n", on);
>  
>  	if (on) {
> -		ret = pm_runtime_get_sync(&is->pdev->dev);
> -		if (ret < 0) {
> -			pm_runtime_put(&is->pdev->dev);
> +		ret = pm_runtime_resume_and_get(&is->pdev->dev);
> +		if (ret < 0)
>  			return ret;
> -		}
> +
>  		set_bit(IS_ST_PWR_ON, &is->state);
>  
>  		ret = fimc_is_start_firmware(is);
> diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c
> index fe20af3a7178..4d8b18078ff3 100644
> --- a/drivers/media/platform/exynos4-is/fimc-lite.c
> +++ b/drivers/media/platform/exynos4-is/fimc-lite.c
> @@ -469,9 +469,9 @@ static int fimc_lite_open(struct file *file)
>  	}
>  
>  	set_bit(ST_FLITE_IN_USE, &fimc->state);
> -	ret = pm_runtime_get_sync(&fimc->pdev->dev);
> +	ret = pm_runtime_resume_and_get(&fimc->pdev->dev);
>  	if (ret < 0)
> -		goto err_pm;
> +		goto err_in_use;
>  
>  	ret = v4l2_fh_open(file);
>  	if (ret < 0)
> @@ -499,6 +499,7 @@ static int fimc_lite_open(struct file *file)
>  	v4l2_fh_release(file);
>  err_pm:
>  	pm_runtime_put_sync(&fimc->pdev->dev);
> +err_in_use:
>  	clear_bit(ST_FLITE_IN_USE, &fimc->state);
>  unlock:
>  	mutex_unlock(&fimc->lock);
> diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c
> index c9704a147e5c..7c1eb05c508f 100644
> --- a/drivers/media/platform/exynos4-is/fimc-m2m.c
> +++ b/drivers/media/platform/exynos4-is/fimc-m2m.c
> @@ -75,7 +75,7 @@ static int start_streaming(struct vb2_queue *q, unsigned int count)
>  	struct fimc_ctx *ctx = q->drv_priv;
>  	int ret;
>  
> -	ret = pm_runtime_get_sync(&ctx->fimc_dev->pdev->dev);
> +	ret = pm_runtime_resume_and_get(&ctx->fimc_dev->pdev->dev);
Use the fact pm_runtime_resume_and_get only returns 0 or < 0 to
make this
return pm_runtime_resume_and_get()

>  	return ret > 0 ? 0 : ret;
>  }
>  
> diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
> index 13d192ba4aa6..9346d44a06c2 100644
> --- a/drivers/media/platform/exynos4-is/media-dev.c
> +++ b/drivers/media/platform/exynos4-is/media-dev.c
> @@ -512,11 +512,9 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd)
>  	if (!fmd->pmf)
>  		return -ENXIO;
>  
> -	ret = pm_runtime_get_sync(fmd->pmf);
> -	if (ret < 0) {
> -		pm_runtime_put(fmd->pmf);
> +	ret = pm_runtime_resume_and_get(fmd->pmf);
> +	if (ret < 0)
>  		return ret;
> -	}
>  
>  	fmd->num_sensors = 0;
>  
> @@ -1291,7 +1289,7 @@ static int cam_clk_prepare(struct clk_hw *hw)
>  	if (camclk->fmd->pmf == NULL)
>  		return -ENODEV;
>  
> -	ret = pm_runtime_get_sync(camclk->fmd->pmf);
> +	ret = pm_runtime_resume_and_get(camclk->fmd->pmf);
return pm_...

>  	return ret < 0 ? ret : 0;
>  }
>  
> diff --git a/drivers/media/platform/exynos4-is/mipi-csis.c b/drivers/media/platform/exynos4-is/mipi-csis.c
> index 1aac167abb17..2a6afb78a049 100644
> --- a/drivers/media/platform/exynos4-is/mipi-csis.c
> +++ b/drivers/media/platform/exynos4-is/mipi-csis.c
> @@ -494,7 +494,7 @@ static int s5pcsis_s_power(struct v4l2_subdev *sd, int on)
>  	struct device *dev = &state->pdev->dev;
>  
>  	if (on)
> -		return pm_runtime_get_sync(dev);
> +		return pm_runtime_resume_and_get(dev);
>  
>  	return pm_runtime_put_sync(dev);
>  }
> @@ -509,11 +509,9 @@ static int s5pcsis_s_stream(struct v4l2_subdev *sd, int enable)
>  
>  	if (enable) {
>  		s5pcsis_clear_counters(state);
> -		ret = pm_runtime_get_sync(&state->pdev->dev);
> -		if (ret && ret != 1) {
> -			pm_runtime_put_noidle(&state->pdev->dev);
> +		ret = pm_runtime_resume_and_get(&state->pdev->dev);
> +		if (ret && ret != 1)

It won't be equal to 1 as pm_runtime_resume_and_get only returns <= 0

>  			return ret;
> -		}
>  	}
>  
>  	mutex_lock(&state->lock);


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 63/79] media: exynos-gsc: use pm_runtime_resume_and_get()

[Jonathan Cameron]

On Wed, 28 Apr 2021 16:52:24 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  drivers/media/platform/exynos-gsc/gsc-m2m.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c
> index 27a3c92c73bc..09551e96ac15 100644
> --- a/drivers/media/platform/exynos-gsc/gsc-m2m.c
> +++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c
> @@ -58,7 +58,7 @@ static int gsc_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
>  	struct gsc_ctx *ctx = q->drv_priv;
>  	int ret;
>  
> -	ret = pm_runtime_get_sync(&ctx->gsc_dev->pdev->dev);
> +	ret = pm_runtime_resume_and_get(&ctx->gsc_dev->pdev->dev);
>  	return ret > 0 ? 0 : ret;
return pm_runtime_resume_and_get()

as
static inline int pm_runtime_resume_and_get(struct device *dev)
{
	int ret;

	ret = __pm_runtime_resume(dev, RPM_GET_PUT);
	if (ret < 0) {
		pm_runtime_put_noidle(dev);
		return ret;
	}

	return 0;
}

Can't return >= 0

>  }
>  


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 73/79] media: stm32: use pm_runtime_resume_and_get()

[Jonathan Cameron]

On Wed, 28 Apr 2021 16:52:34 +0200
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> wrote:

> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  drivers/media/platform/stm32/stm32-dcmi.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
> index bbcc2254fa2e..5f4e1db8cfcd 100644
> --- a/drivers/media/platform/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
> @@ -723,11 +723,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	u32 val = 0;
>  	int ret;
>  
> -	ret = pm_runtime_get_sync(dcmi->dev);
> +	ret = pm_runtime_resume_and_get(dcmi->dev);
>  	if (ret < 0) {
>  		dev_err(dcmi->dev, "%s: Failed to start streaming, cannot get sync (%d)\n",
>  			__func__, ret);
> -		goto err_pm_put;
> +		goto err_unlock;

maybe err_unlocked; to indicate the lock isn't held.  This briefly confused me.

>  	}
>  
>  	ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline);
> @@ -848,6 +848,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
>  
>  err_pm_put:
>  	pm_runtime_put(dcmi->dev);
> +err_unlock:
>  	spin_lock_irq(&dcmi->irqlock);
>  	/*
>  	 * Return all buffers to vb2 in QUEUED state.


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel