Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: peng.fan@oss.nxp.com
Cc: ohad@wizery.com, bjorn.andersson@linaro.org,
	o.rempel@pengutronix.de, robh+dt@kernel.org,
	devicetree@vger.kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-remoteproc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V5 7/8] remoteproc: imx_rproc: support i.MX7ULP
Date: Mon, 3 May 2021 10:29:35 -0600
Message-ID: <20210503162935.GB1699665@xps15> (raw)
In-Reply-To: <1618971622-30539-8-git-send-email-peng.fan@oss.nxp.com>

On Wed, Apr 21, 2021 at 10:20:21AM +0800, peng.fan@oss.nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> i.MX7ULP A7 core runs under control of M4 core, M4 core starts by ROM
> and powers most serivces used by A7 core, so A7 core has no power to

s/serivces/services

I pointed that out on V4 - why do I have to do so again?

With that:

Reviwed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

> start and stop M4 core. And the M4 core's state is default RPROC_DETACHED
> and remoteproc framework not able to stop the M4 core.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/remoteproc/imx_rproc.c | 49 ++++++++++++++++++++++++++--------
>  1 file changed, 38 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index e9d9860e4fce..d26254609a52 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -136,6 +136,14 @@ static const struct imx_rproc_att imx_rproc_att_imx8mq[] = {
>  	{ 0x40000000, 0x40000000, 0x80000000, 0 },
>  };
>  
> +static const struct imx_rproc_att imx_rproc_att_imx7ulp[] = {
> +	{0x1FFD0000, 0x1FFD0000, 0x30000, ATT_OWN},
> +	{0x20000000, 0x20000000, 0x10000, ATT_OWN},
> +	{0x2F000000, 0x2F000000, 0x20000, ATT_OWN},
> +	{0x2F020000, 0x2F020000, 0x20000, ATT_OWN},
> +	{0x60000000, 0x60000000, 0x40000000, 0}
> +};
> +
>  static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
>  	/* dev addr , sys addr  , size	    , flags */
>  	/* OCRAM_S (M4 Boot code) - alias */
> @@ -196,6 +204,12 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mq = {
>  	.method		= IMX_RPROC_MMIO,
>  };
>  
> +static const struct imx_rproc_dcfg imx_rproc_cfg_imx7ulp = {
> +	.att		= imx_rproc_att_imx7ulp,
> +	.att_size	= ARRAY_SIZE(imx_rproc_att_imx7ulp),
> +	.method		= IMX_RPROC_NONE,
> +};
> +
>  static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
>  	.src_reg	= IMX7D_SRC_SCR,
>  	.src_mask	= IMX7D_M4_RST_MASK,
> @@ -238,6 +252,9 @@ static int imx_rproc_stop(struct rproc *rproc)
>  	struct device *dev = priv->dev;
>  	int ret;
>  
> +	if (dcfg->method == IMX_RPROC_NONE)
> +		return -EOPNOTSUPP;
> +
>  	ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
>  				 dcfg->src_mask, dcfg->src_stop);
>  	if (ret)
> @@ -573,12 +590,31 @@ static void imx_rproc_free_mbox(struct rproc *rproc)
>  
>  static int imx_rproc_detect_mode(struct imx_rproc *priv)
>  {
> +	struct regmap_config config = { .name = "imx-rproc" };
>  	const struct imx_rproc_dcfg *dcfg = priv->dcfg;
>  	struct device *dev = priv->dev;
> +	struct regmap *regmap;
>  	int ret;
>  	u32 val;
>  
> -	ret = regmap_read(priv->regmap, dcfg->src_reg, &val);
> +	switch (dcfg->method) {
> +	case IMX_RPROC_NONE:
> +		priv->rproc->state = RPROC_DETACHED;
> +		return 0;
> +	default:
> +		break;
> +	}
> +
> +	regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
> +	if (IS_ERR(regmap)) {
> +		dev_err(dev, "failed to find syscon\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	priv->regmap = regmap;
> +	regmap_attach_dev(dev, regmap, &config);
> +
> +	ret = regmap_read(regmap, dcfg->src_reg, &val);
>  	if (ret) {
>  		dev_err(dev, "Failed to read src\n");
>  		return ret;
> @@ -625,18 +661,9 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  	struct device_node *np = dev->of_node;
>  	struct imx_rproc *priv;
>  	struct rproc *rproc;
> -	struct regmap_config config = { .name = "imx-rproc" };
>  	const struct imx_rproc_dcfg *dcfg;
> -	struct regmap *regmap;
>  	int ret;
>  
> -	regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
> -	if (IS_ERR(regmap)) {
> -		dev_err(dev, "failed to find syscon\n");
> -		return PTR_ERR(regmap);
> -	}
> -	regmap_attach_dev(dev, regmap, &config);
> -
>  	/* set some other name then imx */
>  	rproc = rproc_alloc(dev, "imx-rproc", &imx_rproc_ops,
>  			    NULL, sizeof(*priv));
> @@ -651,7 +678,6 @@ static int imx_rproc_probe(struct platform_device *pdev)
>  
>  	priv = rproc->priv;
>  	priv->rproc = rproc;
> -	priv->regmap = regmap;
>  	priv->dcfg = dcfg;
>  	priv->dev = dev;
>  
> @@ -720,6 +746,7 @@ static int imx_rproc_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id imx_rproc_of_match[] = {
> +	{ .compatible = "fsl,imx7ulp-cm4", .data = &imx_rproc_cfg_imx7ulp },
>  	{ .compatible = "fsl,imx7d-cm4", .data = &imx_rproc_cfg_imx7d },
>  	{ .compatible = "fsl,imx6sx-cm4", .data = &imx_rproc_cfg_imx6sx },
>  	{ .compatible = "fsl,imx8mq-cm4", .data = &imx_rproc_cfg_imx8mq },
> -- 
> 2.30.0
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-21  2:20 [PATCH V5 0/8] remoteproc: imx_rproc: support i.MX7ULP/8MN/8MP peng.fan
2021-04-21  2:20 ` [PATCH V5 1/8] dt-bindings: remoteproc: imx_rproc: add fsl, auto-boot property peng.fan
2021-04-21  2:20 ` [PATCH V5 2/8] dt-bindings: remoteproc: imx_rproc: add i.MX7ULP support peng.fan
2021-04-21  2:20 ` [PATCH V5 3/8] dt-bindings: remoteproc: imx_rproc: support i.MX8MN/P peng.fan
2021-04-21  2:20 ` [PATCH V5 4/8] remoteproc: imx_rproc: parse fsl,auto-boot peng.fan
2021-04-21  2:20 ` [PATCH V5 5/8] remoteproc: imx_rproc: initial support for mutilple start/stop method peng.fan
2021-05-03 16:30   ` Mathieu Poirier
2021-04-21  2:20 ` [PATCH V5 6/8] remoteproc: imx_rproc: make clk optional peng.fan
2021-04-21  2:20 ` [PATCH V5 7/8] remoteproc: imx_rproc: support i.MX7ULP peng.fan
2021-05-03 16:29   ` Mathieu Poirier [this message]
2021-05-06  4:11     ` Peng Fan
2021-04-21  2:20 ` [PATCH V5 8/8] remoteproc: imx_rproc: support i.MX8MN/P peng.fan
2021-05-03 16:25   ` Mathieu Poirier
2021-04-22 16:56 ` [PATCH V5 0/8] remoteproc: imx_rproc: support i.MX7ULP/8MN/8MP Mathieu Poirier
2021-04-23  1:01   ` Peng Fan
2021-04-23 14:50     ` Mathieu Poirier
2021-04-23 23:28       ` Peng Fan
2021-04-26 15:46         ` Mathieu Poirier
2021-04-26 23:45           ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210503162935.GB1699665@xps15 \
    --to=mathieu.poirier@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=ohad@wizery.com \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git