On Mon, 26 Apr 2021 14:16:05 +0200 Lukasz Majewski wrote: > This patch adds DTS definition of the imx278 based XEA board. > > Signed-off-by: Lukasz Majewski > > --- > Changes for v2: > - Fix 'memory' node and remove regulators subnode > - Rename 'flash0: s25fl256s0@0' to flash@0 > - Add proper compatible for XEA board > --- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/imx28-lwe.dtsi | 174 > +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx28-xea.dts | > 99 ++++++++++++++++++ 3 files changed, 275 insertions(+), 1 > deletion(-) create mode 100644 arch/arm/boot/dts/imx28-lwe.dtsi > create mode 100644 arch/arm/boot/dts/imx28-xea.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 8e5d4ab4e75e..d2398a090e4d 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -721,7 +721,8 @@ dtb-$(CONFIG_ARCH_MXS) += \ > imx28-m28evk.dtb \ > imx28-sps1.dtb \ > imx28-ts4600.dtb \ > - imx28-tx28.dtb > + imx28-tx28.dtb \ > + imx28-xea.dtb > dtb-$(CONFIG_ARCH_NOMADIK) += \ > ste-nomadik-s8815.dtb \ > ste-nomadik-nhk15.dtb > diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi > b/arch/arm/boot/dts/imx28-lwe.dtsi new file mode 100644 > index 000000000000..2d14a8ae91f8 > --- /dev/null > +++ b/arch/arm/boot/dts/imx28-lwe.dtsi > @@ -0,0 +1,174 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > +/* > + * Copyright 2021 > + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de > + */ > + > +/dts-v1/; > +#include "imx28.dtsi" > + > +/ { > + aliases { > + spi2 = &ssp3; > + }; > + > + chosen { > + bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro > rootwait console=ttyAMA0,115200 panic=1"; > + }; > + > + memory@0x40000000 { > + reg = <0x40000000 0x08000000>; > + }; > + > + reg_3v3: regulator-reg-3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_usb_5v: regulator-reg-usb-5v { > + compatible = "regulator-fixed"; > + regulator-name = "usb_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + }; > + > + reg_fec_3v3: regulator-reg-fec-3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "fec-phy"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + enable-active-high; > + regulator-boot-on; > + }; > +}; > + > +&duart { > + pinctrl-names = "default"; > + pinctrl-0 = <&duart_pins_a>; > + status = "okay"; > +}; > + > +&i2c0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > +}; > + > +&saif0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&saif0_pins_a>; > + #sound-dai-cells = <0>; > + assigned-clocks = <&clks 53>; > + assigned-clock-rates = <12000000>; > + status = "okay"; > +}; > + > +&saif1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&saif1_pins_a>; > + fsl,saif-master = <&saif0>; > + #sound-dai-cells = <0>; > + status = "okay"; > +}; > + > +&spi3_pins_a { > + fsl,pinmux-ids = < > + MX28_PAD_AUART2_RX__SSP3_D4 > + MX28_PAD_AUART2_TX__SSP3_D5 > + MX28_PAD_SSP3_SCK__SSP3_SCK > + MX28_PAD_SSP3_MOSI__SSP3_CMD > + MX28_PAD_SSP3_MISO__SSP3_D0 > + MX28_PAD_SSP3_SS0__SSP3_D3 > + MX28_PAD_AUART2_TX__GPIO_3_9 > + >; > +}; > + > +&ssp3 { > + compatible = "fsl,imx28-spi"; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi3_pins_a>; > + status = "okay"; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + spi-max-frequency = <40000000>; > + reg = <0>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "u-boot"; > + reg = <0 0x80000>; > + read-only; > + }; > + > + partition@80000 { > + label = "env0"; > + reg = <0x80000 0x10000>; > + }; > + > + partition@90000 { > + label = "env1"; > + reg = <0x90000 0x10000>; > + }; > + > + partition@100000 { > + label = "kernel"; > + reg = <0x100000 0x400000>; > + }; > + > + partition@500000 { > + label = "swupdate"; > + reg = <0x500000 0x800000>; > + }; > + }; > + }; > +}; > + > +&ssp2 { > + compatible = "fsl,imx28-spi"; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi2_pins_a>; > + status = "okay"; > +}; > + > +&ssp0 { > + compatible = "fsl,imx28-mmc"; > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc0_8bit_pins_a>; > + bus-width = <8>; > + vmmc-supply = <®_3v3>; > + non-removable; > + status = "okay"; > +}; > + > +&usb0 { > + vbus-supply = <®_usb_5v>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>; > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&usbphy0 { > + status = "okay"; > +}; > + > +&usb1 { > + vbus-supply = <®_usb_5v>; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb1_pins_b>; > + dr_mode = "host"; > + status = "okay"; > +}; > + > +&usbphy1 { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx28-xea.dts > b/arch/arm/boot/dts/imx28-xea.dts new file mode 100644 > index 000000000000..a400c108f66a > --- /dev/null > +++ b/arch/arm/boot/dts/imx28-xea.dts > @@ -0,0 +1,99 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > +/* > + * Copyright 2021 > + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de > + */ > + > +/dts-v1/; > +#include "imx28-lwe.dtsi" > + > +/ { > + compatible = "lwn,imx28-xea", "fsl,imx28"; > +}; > + > +&can0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&can1_pins_a>; > + status = "okay"; > +}; > + > +&i2c1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins_b>; > + status = "okay"; > +}; > + > +&pinctrl { > + pinctrl-names = "default"; > + pinctrl-0 = <&hog_pins_a &hog_pins_tiva>; > + > + hog_pins_a: hog@0 { > + reg = <0>; > + fsl,pinmux-ids = < > + MX28_PAD_GPMI_D00__GPIO_0_0 > + MX28_PAD_GPMI_D02__GPIO_0_2 > + MX28_PAD_GPMI_D05__GPIO_0_5 > + MX28_PAD_GPMI_CE1N__GPIO_0_17 > + MX28_PAD_GPMI_RDY0__GPIO_0_20 > + MX28_PAD_GPMI_RDY1__GPIO_0_21 > + MX28_PAD_GPMI_RDY2__GPIO_0_22 > + MX28_PAD_GPMI_RDN__GPIO_0_24 > + MX28_PAD_GPMI_CLE__GPIO_0_27 > + MX28_PAD_LCD_VSYNC__GPIO_1_28 > + MX28_PAD_SSP1_SCK__GPIO_2_12 > + MX28_PAD_SSP1_CMD__GPIO_2_13 > + MX28_PAD_SSP2_SS1__GPIO_2_20 > + MX28_PAD_SSP2_SS2__GPIO_2_21 > + MX28_PAD_LCD_D00__GPIO_1_0 > + MX28_PAD_LCD_D01__GPIO_1_1 > + MX28_PAD_LCD_D02__GPIO_1_2 > + MX28_PAD_LCD_D03__GPIO_1_3 > + MX28_PAD_LCD_D04__GPIO_1_4 > + MX28_PAD_LCD_D05__GPIO_1_5 > + MX28_PAD_LCD_D06__GPIO_1_6 > + >; > + fsl,drive-strength = ; > + fsl,voltage = ; > + fsl,pull-up = ; > + }; > + > + hog_pins_tiva: hog@1 { > + reg = <1>; > + fsl,pinmux-ids = < > + MX28_PAD_GPMI_RDY3__GPIO_0_23 > + MX28_PAD_GPMI_WRN__GPIO_0_25 > + >; > + fsl,voltage = ; > + fsl,pull-up = ; > + }; > + > + hog_pins_coding: hog@2 { > + reg = <2>; > + fsl,pinmux-ids = < > + MX28_PAD_GPMI_D01__GPIO_0_1 > + MX28_PAD_GPMI_D03__GPIO_0_3 > + MX28_PAD_GPMI_D04__GPIO_0_4 > + MX28_PAD_GPMI_D06__GPIO_0_6 > + MX28_PAD_GPMI_D07__GPIO_0_7 > + >; > + fsl,voltage = ; > + fsl,pull-up = ; > + }; > +}; > + > +®_fec_3v3 { > + gpio = <&gpio0 0 0>; > +}; > + > +®_usb_5v { > + gpio = <&gpio0 2 0>; > +}; > + > +&spi2_pins_a { > + fsl,pinmux-ids = < > + MX28_PAD_SSP2_SCK__SSP2_SCK > + MX28_PAD_SSP2_MOSI__SSP2_CMD > + MX28_PAD_SSP2_MISO__SSP2_D0 > + MX28_PAD_SSP2_SS0__GPIO_2_19 > + >; > +}; Gentle ping on this patch. Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de