[PATCH V3] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

[PATCH V3] ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators

[Marek Vasut]

Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.

While no instability or problems are currently observed, the regulators
should be fully described in DT and that description should fully match
the hardware, else this might lead to unforseen issues later. Fix this.

Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Ludwig Zenz <lzenz@dh-electronics.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: stable@vger.kernel.org
---
V2: Amend commit message
V3: Reinstate the missing SoB line, add RB
---
 arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
index 236fc205c389..d0768ae429fa 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
@@ -406,6 +406,18 @@ &reg_soc {
 	vin-supply = <&sw1_reg>;
 };
 
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V3] ARM: dts: imx6q-dhcom: Add PU, VDD1P1, VDD2P5 regulators

[Christoph Niedermaier]

From: Marek Vasut [mailto:marex@denx.de]
Sent: Monday, April 26, 2021 12:23 PM

> Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
> via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
> from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
> 
> While no instability or problems are currently observed, the regulators
> should be fully described in DT and that description should fully match
> the hardware, else this might lead to unforseen issues later. Fix this.
> 
> Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM
> and PDK2")
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Ludwig Zenz <lzenz@dh-electronics.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: stable@vger.kernel.org
> ---
> V2: Amend commit message
> V3: Reinstate the missing SoB line, add RB
> ---
>  arch/arm/boot/dts/imx6q-dhcom-som.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
> b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
> index 236fc205c389..d0768ae429fa 100644
> --- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
> +++ b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
> @@ -406,6 +406,18 @@ &reg_soc {
>         vin-supply = <&sw1_reg>;
>  };
> 
> +&reg_pu {
> +       vin-supply = <&sw1_reg>;
> +};
> +
> +&reg_vdd1p1 {
> +       vin-supply = <&sw2_reg>;
> +};
> +
> +&reg_vdd2p5 {
> +       vin-supply = <&sw2_reg>;
> +};
> +
>  &uart1 {
>         pinctrl-names = "default";
>         pinctrl-0 = <&pinctrl_uart1>;
> --
> 2.30.2

Reviewed-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH V3] ARM: dts: imx6q-dhcom: Add PU, VDD1P1, VDD2P5 regulators

[Shawn Guo]

On Mon, Apr 26, 2021 at 12:23:21PM +0200, Marek Vasut wrote:
> Per schematic, both PU and SOC regulator are supplied from LTC3676 SW1
> via VDDSOC_IN rail, add the PU input. Both VDD1P1, VDD2P5 are supplied
> from LTC3676 SW2 via VDDHIGH_IN rail, add both inputs.
> 
> While no instability or problems are currently observed, the regulators
> should be fully described in DT and that description should fully match
> the hardware, else this might lead to unforseen issues later. Fix this.
> 
> Fixes: 52c7a088badd ("ARM: dts: imx6q: Add support for the DHCOM iMX6 SoM and PDK2")
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: Ludwig Zenz <lzenz@dh-electronics.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: stable@vger.kernel.org

Applied, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel