archive mirror
 help / color / mirror / Atom feed
From: Dario Binacchi <>
Cc: Dario Binacchi <>,
	Haojian Zhuang <>,
	Linus Walleij <>,
	Tony Lindgren <>,,,
Subject: [PATCH v2 0/2] am335x: set pinmux registers from pins debug file
Date: Mon, 17 May 2021 22:00:00 +0200	[thread overview]
Message-ID: <> (raw)

The patch was born from the need to change the slew rate of the LCD pins
of a custom AM335x board during EMC tests. The AM335x, as described in a
note in section 9.1 of its reference manual [1], is unable to write
pinmux registers from user space. The series now makes it possible to
write these registers from the pins debug file.


Changes in v2:
- Remove CONFIG_SOC_AM33XX dependency.

Dario Binacchi (2):
  pinctrl: core: configure pinmux from pins debug file
  pinctrl: single: set pinmux from pins debug file

 drivers/pinctrl/core.c           | 56 ++++++++++++++++++++++++++++++--
 drivers/pinctrl/pinctrl-single.c | 20 ++++++++++++
 include/linux/pinctrl/pinctrl.h  |  2 ++
 3 files changed, 76 insertions(+), 2 deletions(-)


linux-arm-kernel mailing list

             reply	other threads:[~2021-05-17 20:02 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-17 20:00 Dario Binacchi [this message]
2021-05-17 20:00 ` [PATCH v2 2/2] pinctrl: single: set pinmux from pins debug file Dario Binacchi
2021-05-18  6:05   ` Tony Lindgren
2021-05-18  8:57     ` Dario Binacchi
2021-05-21  9:25       ` Tony Lindgren
2021-05-19 11:31 ` [PATCH v2 0/2] am335x: set pinmux registers " Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).