linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: <patrice.chotard@foss.st.com>
To: Mark Brown <broonie@kernel.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	<linux-mtd@lists.infradead.org>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	<linux-spi@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: <patrice.chotard@foss.st.com>, <christophe.kerello@foss.st.com>
Subject: [PATCH v3 0/3] MTD: spinand: Add spi_mem_poll_status() support
Date: Tue, 18 May 2021 11:39:48 +0200	[thread overview]
Message-ID: <20210518093951.23136-1-patrice.chotard@foss.st.com> (raw)

From: Patrice Chotard <patrice.chotard@foss.st.com>

This series adds support for the spi_mem_poll_status() spinand
interface.
Some QSPI controllers allows to poll automatically memory 
status during operations (erase, read or write). This allows to 
offload the CPU for this task.
STM32 QSPI is supporting this feature, driver update are also
part of this series.

Chnages in v3:
  - Add spi_mem_read_status() which allows to read 8 or 16 bits status.
  - Add initial_delay_us and polling_delay_us parameters to spi_mem_poll_status().
    and also to poll_status() callback.
  - Move spi_mem_supports_op() in SW-based polling case.
  - Add delay before invoquing read_poll_timeout().
  - Remove the reinit/wait_for_completion() added in v2.
  - Add initial_delay_us and polling_delay_us parameters to spinand_wait().
  - Add SPINAND_READ/WRITE/ERASE/RESET_INITIAL_DELAY_US and
    SPINAND_READ/WRITE/ERASE/RESET_POLL_DELAY_US defines.
  - Remove spi_mem_finalize_op() API added in v2.

Changes in v2:
  - Indicates the spi_mem_poll_status() timeout unit
  - Use 2-byte wide status register
  - Add spi_mem_supports_op() call in spi_mem_poll_status()
  - Add completion management in spi_mem_poll_status()
  - Add offload/non-offload case management in spi_mem_poll_status()
  - Optimize the non-offload case by using read_poll_timeout()
  - mask and match stm32_qspi_poll_status()'s parameters are 2-byte wide
  - Make usage of new spi_mem_finalize_op() API in
    stm32_qspi_wait_poll_status()

Patrice Chotard (3):
  spi: spi-mem: add automatic poll status functions
  mtd: spinand: use the spi-mem poll status APIs
  spi: stm32-qspi: add automatic poll status feature

 drivers/mtd/nand/spi/core.c  | 45 +++++++++++++------
 drivers/spi/spi-mem.c        | 85 ++++++++++++++++++++++++++++++++++++
 drivers/spi/spi-stm32-qspi.c | 83 +++++++++++++++++++++++++++++++----
 include/linux/mtd/spinand.h  | 11 ++++-
 include/linux/spi/spi-mem.h  | 14 ++++++
 5 files changed, 216 insertions(+), 22 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-05-18  9:45 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-18  9:39 patrice.chotard [this message]
2021-05-18  9:39 ` [PATCH v3 1/3] spi: spi-mem: add automatic poll status functions patrice.chotard
2021-05-18 11:30   ` Boris Brezillon
2021-05-18 11:50     ` Patrice CHOTARD
2021-05-18 11:40   ` Boris Brezillon
2021-05-18 11:54     ` Patrice CHOTARD
2021-05-18  9:39 ` [PATCH v3 2/3] mtd: spinand: use the spi-mem poll status APIs patrice.chotard
2021-05-18 11:28   ` Boris Brezillon
2021-05-18 11:50     ` Patrice CHOTARD
2021-05-18  9:39 ` [PATCH v3 3/3] spi: stm32-qspi: add automatic poll status feature patrice.chotard
2021-05-18 11:39   ` Boris Brezillon
2021-05-18 11:53     ` Patrice CHOTARD
2021-05-18 11:28 ` [PATCH v3 0/3] MTD: spinand: Add spi_mem_poll_status() support Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210518093951.23136-1-patrice.chotard@foss.st.com \
    --to=patrice.chotard@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=boris.brezillon@collabora.com \
    --cc=broonie@kernel.org \
    --cc=christophe.kerello@foss.st.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).