linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Mirela Rabulea (OSS)" <mirela.rabulea@oss.nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, aisheng.dong@nxp.com,
	guoniu.zhou@nxp.com, linux-arm-kernel@lists.infradead.org
Cc: peng.fan@nxp.com, s.hauer@pengutronix.de, linux-imx@nxp.com,
	devicetree@vger.kernel.org, mchehab@kernel.org,
	hverkuil-cisco@xs4all.nl, linux-media@vger.kernel.org,
	linux-kernel@vger.kernel.org, paul.kocialkowski@bootlin.com,
	daniel.baluta@nxp.com, robert.chiras@nxp.com,
	laurentiu.palcu@nxp.com, p.zabel@pengutronix.de,
	ezequiel@collabora.com, Mirela Rabulea <mirela.rabulea@nxp.com>
Subject: [PATCH v12] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes
Date: Wed, 19 May 2021 09:53:55 +0300	[thread overview]
Message-ID: <20210519065355.27615-1-mirela.rabulea@oss.nxp.com> (raw)

From: Mirela Rabulea <mirela.rabulea@nxp.com>

Add dts for imaging subsytem, include jpeg nodes here.
Tested on imx8qxp only, should work on imx8qm, but it was not tested.

Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com>
---
Changes in v12:
  Adress feedback from Shawn Guo:
  - sort nodes based on unit address
  Adress feedback from Aisheng Dong:
  - Use clock indices for LPCG clocks in consumer nodes (jpegdec/jpegenc)

 .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 82 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    |  1 +
 2 files changed, 83 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
new file mode 100644
index 000000000000..2ee789930cbc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019-2021 NXP
+ * Zhou Guoniu <guoniu.zhou@nxp.com>
+ */
+img_subsys: bus@58000000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+
+	img_ipg_clk: clock-img-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "img_ipg_clk";
+	};
+
+	jpegdec: jpegdec@58400000 {
+		compatible = "nxp,imx8qxp-jpgdec";
+		reg = <0x58400000 0x00050000 >;
+		interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+			 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+				  <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <200000000>, <200000000>;
+		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+				<&pd IMX_SC_R_MJPEG_DEC_S0>,
+				<&pd IMX_SC_R_MJPEG_DEC_S1>,
+				<&pd IMX_SC_R_MJPEG_DEC_S2>,
+				<&pd IMX_SC_R_MJPEG_DEC_S3>;
+	};
+
+	jpegenc: jpegenc@58450000 {
+		compatible = "nxp,imx8qxp-jpgenc";
+		reg = <0x58450000 0x00050000 >;
+		interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+			 <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "per", "ipg";
+		assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+				  <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
+		assigned-clock-rates = <200000000>, <200000000>;
+		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+				<&pd IMX_SC_R_MJPEG_ENC_S0>,
+				<&pd IMX_SC_R_MJPEG_ENC_S1>,
+				<&pd IMX_SC_R_MJPEG_ENC_S2>,
+				<&pd IMX_SC_R_MJPEG_ENC_S3>;
+	};
+
+	img_jpeg_dec_lpcg: clock-controller@585d0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585d0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_4>;
+		clock-output-names = "img_jpeg_dec_lpcg_clk",
+				     "img_jpeg_dec_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
+	};
+
+	img_jpeg_enc_lpcg: clock-controller@585f0000 {
+		compatible = "fsl,imx8qxp-lpcg";
+		reg = <0x585f0000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&img_ipg_clk>, <&img_ipg_clk>;
+		clock-indices = <IMX_LPCG_CLK_0>,
+				<IMX_LPCG_CLK_4>;
+		clock-output-names = "img_jpeg_enc_lpcg_clk",
+				     "img_jpeg_enc_lpcg_ipg_clk";
+		power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 1e6b4995091e..2d9589309bd0 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -258,6 +258,7 @@
 	};
 
 	/* sorted in register address */
+	#include "imx8-ss-img.dtsi"
 	#include "imx8-ss-adma.dtsi"
 	#include "imx8-ss-conn.dtsi"
 	#include "imx8-ss-ddr.dtsi"
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-05-19  6:56 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-19  6:53 Mirela Rabulea (OSS) [this message]
2021-05-19  7:27 ` [PATCH v12] arm64: dts: imx8qxp: Add jpeg encoder/decoder nodes Aisheng Dong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210519065355.27615-1-mirela.rabulea@oss.nxp.com \
    --to=mirela.rabulea@oss.nxp.com \
    --cc=aisheng.dong@nxp.com \
    --cc=daniel.baluta@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ezequiel@collabora.com \
    --cc=guoniu.zhou@nxp.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=laurentiu.palcu@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mirela.rabulea@nxp.com \
    --cc=p.zabel@pengutronix.de \
    --cc=paul.kocialkowski@bootlin.com \
    --cc=peng.fan@nxp.com \
    --cc=robert.chiras@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).