From: Tim Harvey <tharvey@gateworks.com>
To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH 3/4] arm64: dts: imx8mm-venice-gw7901: add support for USB hub subload
Date: Tue, 1 Jun 2021 10:49:16 -0700 [thread overview]
Message-ID: <20210601174917.1979-3-tharvey@gateworks.com> (raw)
In-Reply-To: <20210601174917.1979-1-tharvey@gateworks.com>
The USB hub has it's reset as GPIO4_IO17 but can be sub-loaded and
VBUS provided by a VBUS regulator with GPIO4_IO2 as the enable and
GPIO1_IO15 as the active-low over-current.
Enable pull-up for GPIO4_IO17 to keep hub out of reset and move VBUS
enable to GPIO4_IO2. Additionally enable pull-up on GPIO1_IO15 so that
if the hub is loaded it never over-currents.
This allows USB to work in both configurations without a device-tree
change.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 5a1e9df39bec..db43ee28bdb6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -216,7 +216,7 @@
pinctrl-0 = <&pinctrl_reg_usb2>;
compatible = "regulator-fixed";
regulator-name = "usb_usb2_vbus";
- gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -824,8 +824,9 @@
pinctrl_reg_usb2: regusb1grp {
fsl,pins = <
- MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x41
- MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x41
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x41
+ MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x140
+ MX8MM_IOMUXC_GPIO1_IO15_USB2_OTG_OC 0x140
>;
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-01 17:51 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-01 17:49 [PATCH 1/4] arm64: dts: imx8mm-venice-gw700x: override thermal cfg for industrial temp Tim Harvey
2021-06-01 17:49 ` [PATCH 2/4] arm64: dts: imx8mm-venice-gw700x: fix mp5416 pmic config Tim Harvey
2021-07-24 18:19 ` Tim Harvey
2021-07-26 1:01 ` Shawn Guo
2021-07-27 16:05 ` Tim Harvey
2021-06-01 17:49 ` Tim Harvey [this message]
2021-07-24 18:21 ` [PATCH 3/4] arm64: dts: imx8mm-venice-gw7901: add support for USB hub subload Tim Harvey
2021-06-01 17:49 ` [PATCH 4/4] arm64: dts: imx8mm-venice-gw7901: enable pull-down on gpio outputs Tim Harvey
2021-07-24 18:19 ` Tim Harvey
2021-06-02 7:10 ` [PATCH 1/4] arm64: dts: imx8mm-venice-gw700x: override thermal cfg for industrial temp Frieder Schrempf
2021-06-04 15:42 ` Tim Harvey
2021-06-07 7:20 ` Frieder Schrempf
2021-06-07 7:30 ` Jacky Bai
2021-06-07 7:53 ` Frieder Schrempf
2021-06-07 8:00 ` Jacky Bai
2021-06-07 8:34 ` Frieder Schrempf
2021-06-11 18:55 ` Tim Harvey
2021-06-29 7:48 ` Frieder Schrempf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210601174917.1979-3-tharvey@gateworks.com \
--to=tharvey@gateworks.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).