Re: [RFC PATCH v3 11/12] firmware: arm_scmi: Add virtio transport

[Cristian Marussi <cristian.marussi@arm.com>]

Hi,

On Wed, Jun 02, 2021 at 10:25:36AM +0200, Peter Hilber wrote:
> On 01.06.21 16:53, Vincent Guittot wrote:
> > On Tue, 11 May 2021 at 02:28, Peter Hilber <peter.hilber@opensynergy.com> wrote:
> >>
> >> From: Igor Skalkin <igor.skalkin@opensynergy.com>
> >>
> >> This transport enables accessing an SCMI platform as a virtio device.
> >>
> >> Implement an SCMI virtio driver according to the virtio SCMI device spec
> >> [1]. Virtio device id 32 has been reserved for the SCMI device [2].
> >>
> >> The virtio transport has one Tx channel (virtio cmdq, A2P channel) and
> >> at most one Rx channel (virtio eventq, P2A channel).
> >>
> >> The following feature bit defined in [1] is not implemented:
> >> VIRTIO_SCMI_F_SHARED_MEMORY.
> >>
> >> After the preparatory patches, this implements the virtio transport as
> >> paraphrased:
> >>
> >> Only support a single arm-scmi device (which is consistent with the SCMI
> >> spec). scmi-virtio init is called from arm-scmi module init. During the
> >> arm-scmi probing, link to the first probed scmi-virtio device. Defer
> >> arm-scmi probing if no scmi-virtio device is bound yet.
> >>
> >> For simplicity, restrict the number of messages which can be pending
> >> simultaneously according to the virtqueue capacity. (The virtqueue sizes
> >> are negotiated with the virtio device.)
> >>
> >> As soon as Rx channel message buffers are allocated or have been read
> >> out by the arm-scmi driver, feed them to the virtio device.
> >>
> >> Since some virtio devices may not have the short response time exhibited
> >> by SCMI platforms using other transports, set a generous response
> >> timeout.
> >>
> >> Limitations:
> >>
> >> - Polling is not supported.
> >>
> >> - The timeout for delayed responses has not been adjusted.
> >>
> >> [1] https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-scmi.tex
> >> [2] https://www.oasis-open.org/committees/ballot.php?id=3496
> >>
> >> Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com>
> >> [ Peter: Adapted patch for submission to upstream. ]
> >> Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com>
> >> Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com>

[snip]

> >> +
> >> +static unsigned int virtio_get_max_msg(bool tx,
> >> +                                      struct scmi_chan_info *base_cinfo)
> >> +{
> >> +       struct scmi_vio_channel *vioch = base_cinfo->transport_info;
> >> +       unsigned int ret;
> >> +
> >> +       ret = virtqueue_get_vring_size(vioch->vqueue);
> >> +
> >> +       /* Tx messages need multiple descriptors. */()
> >> +       if (tx)
> >> +               ret /= DESCRIPTORS_PER_TX_MSG;
> >> +
> >> +       if (ret > MSG_TOKEN_MAX) {
> > 
> > __scmi_xfer_info_init() returns error for info->max_msg >=
> > MSG_TOKEN_MAX so it should be (ret >= MSG_TOKEN_MAX
> > 
> 
> I think it would be better to use the > comparison in
> __scmi_xfer_info_init(), too. That should work in my understanding. I
> think that change was originally in my branch, but I lost it somehow.
> 

I'll include this proposed fixes on my temp rework for V4.

Thanks,
Cristian

> > 
> >> +               dev_info_once(
> >> +                       base_cinfo->dev,
> >> +                       "Only %ld messages can be pending simultaneously, while the %s virtqueue could hold %d\n",
> >> +                       MSG_TOKEN_MAX, tx ? "tx" : "rx", ret);
> >> +               ret = MSG_TOKEN_MAX;
> > 
> > should be ret = MSG_TOKEN_MAX-1;
> > 
> >> +       }
> >> +
> >> +       return ret;
> >> +}
> >> +
> >> +static int scmi_vio_match_any_dev(struct device *dev, const void *data)
> >> +{
> >> +       return 1;
> >> +}
> >> +
> >> +static struct virtio_driver virtio_scmi_driver; /* Forward declaration */
> >> +
> >> +static int virtio_link_supplier(struct device *dev)
> >> +{
> >> +       struct device *vdev = driver_find_device(
> >> +               &virtio_scmi_driver.driver, NULL, NULL, scmi_vio_match_any_dev);
> >> +
> >> +       if (!vdev) {
> >> +               dev_notice_once(
> >> +                       dev,
> >> +                       "Deferring probe after not finding a bound scmi-virtio device\n");
> >> +               return -EPROBE_DEFER;
> >> +       }
> >> +
> >> +       /* Add device link for remove order and sysfs link. */
> >> +       if (!device_link_add(dev, vdev, DL_FLAG_AUTOREMOVE_CONSUMER)) {
> >> +               put_device(vdev);
> >> +               dev_err(dev, "Adding link to supplier virtio device failed\n");
> >> +               return -ECANCELED;
> >> +       }
> >> +
> >> +       put_device(vdev);
> >> +       return scmi_set_transport_info(dev, dev_to_virtio(vdev));
> >> +}
> >> +
> >> +static bool virtio_chan_available(struct device *dev, int idx)
> >> +{
> >> +       struct virtio_device *vdev;
> >> +
> >> +       /* scmi-virtio doesn't support per-protocol channels */
> >> +       if (is_scmi_protocol_device(dev))
> >> +               return false;
> >> +
> >> +       vdev = scmi_get_transport_info(dev);
> >> +       if (!vdev)
> >> +               return false;
> >> +
> >> +       switch (idx) {
> >> +       case VIRTIO_SCMI_VQ_TX:
> >> +               return true;
> >> +       case VIRTIO_SCMI_VQ_RX:
> >> +               return scmi_vio_have_vq_rx(vdev);
> >> +       default:
> >> +               return false;
> >> +       }
> >> +}
> >> +
> >> +static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev,
> >> +                            bool tx)
> >> +{
> >> +       unsigned long flags;
> >> +       struct virtio_device *vdev;
> >> +       struct scmi_vio_channel *vioch;
> >> +       int index = tx ? VIRTIO_SCMI_VQ_TX : VIRTIO_SCMI_VQ_RX;
> >> +       int max_msg;
> >> +       int i;
> >> +
> >> +       if (!virtio_chan_available(dev, index))
> >> +               return -ENODEV;
> >> +
> >> +       vdev = scmi_get_transport_info(dev);
> >> +       vioch = &((struct scmi_vio_channel *)vdev->priv)[index];
> >> +
> >> +       spin_lock_irqsave(&vioch->lock, flags);
> >> +       cinfo->transport_info = vioch;
> >> +       vioch->cinfo = cinfo;
> >> +       spin_unlock_irqrestore(&vioch->lock, flags);
> >> +
> >> +       max_msg = virtio_get_max_msg(tx, cinfo);
> >> +
> >> +       for (i = 0; i < max_msg; i++) {
> >> +               struct scmi_vio_msg *msg;
> >> +
> >> +               msg = devm_kzalloc(cinfo->dev, sizeof(*msg), GFP_KERNEL);
> >> +               if (!msg)
> >> +                       return -ENOMEM;
> >> +
> >> +               if (tx) {
> >> +                       msg->request = devm_kzalloc(cinfo->dev,
> >> +                                                   VIRTIO_SCMI_MAX_PDU_SIZE,
> >> +                                                   GFP_KERNEL);
> >> +                       if (!msg->request)
> >> +                               return -ENOMEM;
> >> +               }
> >> +
> >> +               msg->input = devm_kzalloc(cinfo->dev, VIRTIO_SCMI_MAX_PDU_SIZE,
> >> +                                         GFP_KERNEL);
> >> +               if (!msg->input)
> >> +                       return -ENOMEM;
> >> +
> >> +               if (tx) {
> >> +                       spin_lock_irqsave(&vioch->lock, flags);
> >> +                       list_add_tail(&msg->list, &vioch->free_list);
> >> +                       spin_unlock_irqrestore(&vioch->lock, flags);
> >> +               } else {
> >> +                       scmi_vio_feed_vq_rx(vioch, msg);
> >> +               }
> >> +       }
> >> +
> >> +       spin_lock_irqsave(&vioch->ready_lock, flags);
> >> +       vioch->ready = true;
> >> +       spin_unlock_irqrestore(&vioch->ready_lock, flags);
> >> +
> >> +       return 0;
> >> +}
> >> +
> >> +static int virtio_chan_free(int id, void *p, void *data)
> >> +{
> >> +       unsigned long flags;
> >> +       struct scmi_chan_info *cinfo = p;
> >> +       struct scmi_vio_channel *vioch = cinfo->transport_info;
> >> +
> >> +       spin_lock_irqsave(&vioch->ready_lock, flags);
> >> +       vioch->ready = false;
> >> +       spin_unlock_irqrestore(&vioch->ready_lock, flags);
> >> +
> >> +       scmi_free_channel(cinfo, data, id);
> >> +       return 0;
> >> +}
> >> +
> >> +static int virtio_send_message(struct scmi_chan_info *cinfo,
> >> +                              struct scmi_xfer *xfer)
> >> +{
> >> +       struct scmi_vio_channel *vioch = cinfo->transport_info;
> >> +       struct scatterlist sg_out;
> >> +       struct scatterlist sg_in;
> >> +       struct scatterlist *sgs[DESCRIPTORS_PER_TX_MSG] = { &sg_out, &sg_in };
> >> +       unsigned long flags;
> >> +       int rc;
> >> +       struct scmi_vio_msg *msg;
> >> +
> >> +       /*
> >> +        * TODO: For now, we don't support polling. But it should not be
> >> +        * difficult to add support.
> >> +        */
> >> +       if (xfer->hdr.poll_completion)
> >> +               return -EINVAL;
> >> +
> >> +       spin_lock_irqsave(&vioch->lock, flags);
> >> +
> >> +       if (list_empty(&vioch->free_list)) {
> >> +               spin_unlock_irqrestore(&vioch->lock, flags);
> >> +               return -EBUSY;
> >> +       }
> >> +
> >> +       msg = list_first_entry(&vioch->free_list, typeof(*msg), list);
> >> +       list_del(&msg->list);
> >> +
> >> +       msg_tx_prepare(msg->request, xfer);
> >> +
> >> +       sg_init_one(&sg_out, msg->request, msg_command_size(xfer));
> >> +       sg_init_one(&sg_in, msg->input, msg_response_size(xfer));
> >> +
> >> +       rc = virtqueue_add_sgs(vioch->vqueue, sgs, 1, 1, msg, GFP_ATOMIC);
> >> +       if (rc) {
> >> +               list_add(&msg->list, &vioch->free_list);
> >> +               dev_err_once(vioch->cinfo->dev,
> >> +                            "%s() failed to add to virtqueue (%d)\n", __func__,
> >> +                            rc);
> >> +       } else {
> >> +               virtqueue_kick(vioch->vqueue);
> >> +       }
> >> +
> >> +       spin_unlock_irqrestore(&vioch->lock, flags);
> >> +
> >> +       return rc;
> >> +}
> >> +
> >> +static void virtio_fetch_response(struct scmi_chan_info *cinfo,
> >> +                                 struct scmi_xfer *xfer, void *msg_handle)
> >> +{
> >> +       struct scmi_vio_msg *msg = msg_handle;
> >> +       struct scmi_vio_channel *vioch = cinfo->transport_info;
> >> +
> >> +       if (!msg) {
> >> +               dev_dbg_once(&vioch->vqueue->vdev->dev,
> >> +                            "Ignoring %s() call with NULL msg_handle\n",
> >> +                            __func__);
> >> +               return;
> >> +       }
> >> +
> >> +       msg_fetch_response(msg->input, msg->rx_len, xfer);
> >> +}
> >> +
> >> +static void virtio_fetch_notification(struct scmi_chan_info *cinfo,
> >> +                                     size_t max_len, struct scmi_xfer *xfer,
> >> +                                     void *msg_handle)
> >> +{
> >> +       struct scmi_vio_msg *msg = msg_handle;
> >> +       struct scmi_vio_channel *vioch = cinfo->transport_info;
> >> +
> >> +       if (!msg) {
> >> +               dev_dbg_once(&vioch->vqueue->vdev->dev,
> >> +                            "Ignoring %s() call with NULL msg_handle\n",
> >> +                            __func__);
> >> +               return;
> >> +       }
> >> +
> >> +       msg_fetch_notification(msg->input, msg->rx_len, max_len, xfer);
> >> +}
> >> +
> >> +static void dummy_clear_channel(struct scmi_chan_info *cinfo)
> >> +{
> >> +}
> >> +
> >> +static bool dummy_poll_done(struct scmi_chan_info *cinfo,
> >> +                           struct scmi_xfer *xfer)
> >> +{
> >> +       return false;
> >> +}
> >> +
> >> +static void virtio_drop_message(struct scmi_chan_info *cinfo, void *msg_handle)
> >> +{
> >> +       unsigned long flags;
> >> +       struct scmi_vio_channel *vioch = cinfo->transport_info;
> >> +       struct scmi_vio_msg *msg = msg_handle;
> >> +
> >> +       if (!msg) {
> >> +               dev_dbg_once(&vioch->vqueue->vdev->dev,
> >> +                            "Ignoring %s() call with NULL msg_handle\n",
> >> +                            __func__);
> >> +               return;
> >> +       }
> >> +
> >> +       if (vioch->is_rx) {
> >> +               scmi_vio_feed_vq_rx(vioch, msg);
> >> +       } else {
> >> +               spin_lock_irqsave(&vioch->lock, flags);
> >> +               list_add(&msg->list, &vioch->free_list);
> >> +               spin_unlock_irqrestore(&vioch->lock, flags);
> >> +       }
> >> +}
> >> +
> >> +static const struct scmi_transport_ops scmi_virtio_ops = {
> >> +       .link_supplier = virtio_link_supplier,
> >> +       .chan_available = virtio_chan_available,
> >> +       .chan_setup = virtio_chan_setup,
> >> +       .chan_free = virtio_chan_free,
> >> +       .get_max_msg = virtio_get_max_msg,
> >> +       .send_message = virtio_send_message,
> >> +       .fetch_response = virtio_fetch_response,
> >> +       .fetch_notification = virtio_fetch_notification,
> >> +       .clear_channel = dummy_clear_channel,
> >> +       .poll_done = dummy_poll_done,
> >> +       .drop_message = virtio_drop_message,
> >> +};
> >> +
> >> +static int scmi_vio_probe(struct virtio_device *vdev)
> >> +{
> >> +       struct device *dev = &vdev->dev;
> >> +       struct scmi_vio_channel *channels;
> >> +       bool have_vq_rx;
> >> +       int vq_cnt;
> >> +       int i;
> >> +       int ret;
> >> +       struct virtqueue *vqs[VIRTIO_SCMI_VQ_MAX_CNT];
> >> +
> >> +       have_vq_rx = scmi_vio_have_vq_rx(vdev);
> >> +       vq_cnt = have_vq_rx ? VIRTIO_SCMI_VQ_MAX_CNT : 1;
> >> +
> >> +       channels = devm_kcalloc(dev, vq_cnt, sizeof(*channels), GFP_KERNEL);
> >> +       if (!channels)
> >> +               return -ENOMEM;
> >> +
> >> +       if (have_vq_rx)
> >> +               channels[VIRTIO_SCMI_VQ_RX].is_rx = true;
> >> +
> >> +       ret = virtio_find_vqs(vdev, vq_cnt, vqs, scmi_vio_complete_callbacks,
> >> +                             scmi_vio_vqueue_names, NULL);
> >> +       if (ret) {
> >> +               dev_err(dev, "Failed to get %d virtqueue(s)\n", vq_cnt);
> >> +               return ret;
> >> +       }
> >> +       dev_info(dev, "Found %d virtqueue(s)\n", vq_cnt);
> >> +
> >> +       for (i = 0; i < vq_cnt; i++) {
> >> +               spin_lock_init(&channels[i].lock);
> >> +               spin_lock_init(&channels[i].ready_lock);
> >> +               INIT_LIST_HEAD(&channels[i].free_list);
> >> +               channels[i].vqueue = vqs[i];
> >> +       }
> >> +
> >> +       vdev->priv = channels;
> >> +
> >> +       return 0;
> >> +}
> >> +
> >> +static void scmi_vio_remove(struct virtio_device *vdev)
> >> +{
> >> +       vdev->config->reset(vdev);
> >> +       vdev->config->del_vqs(vdev);
> >> +}
> >> +
> >> +static unsigned int features[] = {
> >> +       VIRTIO_SCMI_F_P2A_CHANNELS,
> >> +};
> >> +
> >> +static const struct virtio_device_id id_table[] = {
> >> +       { VIRTIO_ID_SCMI, VIRTIO_DEV_ANY_ID },
> >> +       { 0 }
> >> +};
> >> +
> >> +static struct virtio_driver virtio_scmi_driver = {
> >> +       .driver.name = "scmi-virtio",
> >> +       .driver.owner = THIS_MODULE,
> >> +       .feature_table = features,
> >> +       .feature_table_size = ARRAY_SIZE(features),
> >> +       .id_table = id_table,
> >> +       .probe = scmi_vio_probe,
> >> +       .remove = scmi_vio_remove,
> >> +};
> >> +
> >> +static int __init virtio_scmi_init(void)
> >> +{
> >> +       return register_virtio_driver(&virtio_scmi_driver);
> >> +}
> >> +
> >> +static void __exit virtio_scmi_exit(void)
> >> +{
> >> +       unregister_virtio_driver(&virtio_scmi_driver);
> >> +}
> >> +
> >> +const struct scmi_desc scmi_virtio_desc = {
> >> +       .init = virtio_scmi_init,
> >> +       .exit = virtio_scmi_exit,
> >> +       .ops = &scmi_virtio_ops,
> >> +       .max_rx_timeout_ms = 60000, /* for non-realtime virtio devices */
> >> +       .max_msg = 0, /* overridden by virtio_get_max_msg() */
> >> +       .max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE,
> >> +};
> >> diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
> >> index f0c35ce8628c..c146fe30e589 100644
> >> --- a/include/uapi/linux/virtio_ids.h
> >> +++ b/include/uapi/linux/virtio_ids.h
> >> @@ -56,5 +56,6 @@
> >>  #define VIRTIO_ID_PMEM                 27 /* virtio pmem */
> >>  #define VIRTIO_ID_BT                   28 /* virtio bluetooth */
> >>  #define VIRTIO_ID_MAC80211_HWSIM       29 /* virtio mac80211-hwsim */
> >> +#define VIRTIO_ID_SCMI                 32 /* virtio SCMI */
> >>
> >>  #endif /* _LINUX_VIRTIO_IDS_H */
> >> diff --git a/include/uapi/linux/virtio_scmi.h b/include/uapi/linux/virtio_scmi.h
> >> new file mode 100644
> >> index 000000000000..732b01504c35
> >> --- /dev/null
> >> +++ b/include/uapi/linux/virtio_scmi.h
> >> @@ -0,0 +1,25 @@
> >> +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
> >> +/*
> >> + * Copyright (C) 2020 OpenSynergy GmbH
> >> + */
> >> +
> >> +#ifndef _UAPI_LINUX_VIRTIO_SCMI_H
> >> +#define _UAPI_LINUX_VIRTIO_SCMI_H
> >> +
> >> +#include <linux/virtio_types.h>
> >> +
> >> +/* Feature bits */
> >> +
> >> +/* Device implements some SCMI notifications, or delayed responses. */
> >> +#define VIRTIO_SCMI_F_P2A_CHANNELS 0
> >> +
> >> +/* Device implements any SCMI statistics shared memory region */
> >> +#define VIRTIO_SCMI_F_SHARED_MEMORY 1
> >> +
> >> +/* Virtqueues */
> >> +
> >> +#define VIRTIO_SCMI_VQ_TX 0 /* cmdq */
> >> +#define VIRTIO_SCMI_VQ_RX 1 /* eventq */
> >> +#define VIRTIO_SCMI_VQ_MAX_CNT 2
> >> +
> >> +#endif /* _UAPI_LINUX_VIRTIO_SCMI_H */
> >> --
> >> 2.25.1
> >>
> >>
> > 
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel