From: Joel Stanley <joel@jms.id.au>
To: Andrew Jeffery <andrew@aj.id.au>,
Eddie James <eajames@linux.ibm.com>,
Brad Bishop <bradleyb@fuzziesquirrel.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org,
Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Subject: [PATCH 5/6] ARM: dts: aspeed: everest: Add vrm and other indicator leds
Date: Mon, 7 Jun 2021 12:42:58 +0930 [thread overview]
Message-ID: <20210607031259.475020-6-joel@jms.id.au> (raw)
In-Reply-To: <20210607031259.475020-1-joel@jms.id.au>
From: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
This commit adds indicator leds for vrms, processors, opencapi
connectors, tpm, planar, power distribution card and dasd
backplane and are driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 270 +++++++++++++++++++
1 file changed, 270 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index db8555e7abf9..2bac7d1f8a03 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -1400,6 +1400,276 @@ led@15 {
type = <PCA955X_TYPE_LED>;
};
};
+
+ pic0_vrm_misc: pca9552@34 {
+ compatible = "ibm,pca9552";
+ reg = <0x34>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "planar";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "tpm";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "cpu3-c61";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "cpu0-c14";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "opencapi-connector3";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "opencapi-connector4";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "opencapi-connector5";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led@8 {
+ label = "vrm4";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "vrm5";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "vrm6";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "vrm7";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "vrm12";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "vrm13";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "vrm14";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "vrm15";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
+
+ pic1_vrm_misc: pca9552@35 {
+ compatible = "ibm,pca9552";
+ reg = <0x35>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led@0 {
+ label = "dasd-backplane";
+ reg = <0>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@1 {
+ label = "power-distribution";
+ reg = <1>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@2 {
+ label = "cpu1-c19";
+ reg = <2>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@3 {
+ label = "cpu2-c56";
+ reg = <3>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@4 {
+ label = "opencapi-connector0";
+ reg = <4>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@5 {
+ label = "opencapi-connector1";
+ reg = <5>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@6 {
+ label = "opencapi-connector2";
+ reg = <6>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led@8 {
+ label = "vrm0";
+ reg = <8>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@9 {
+ label = "vrm1";
+ reg = <9>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@10 {
+ label = "vrm2";
+ reg = <10>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@11 {
+ label = "vrm3";
+ reg = <11>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@12 {
+ label = "vrm8";
+ reg = <12>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@13 {
+ label = "vrm9";
+ reg = <13>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@14 {
+ label = "vrm10";
+ reg = <14>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+
+ led@15 {
+ label = "vrm11";
+ reg = <15>;
+ retain-state-shutdown;
+ default-state = "keep";
+ type = <PCA955X_TYPE_LED>;
+ };
+ };
};
&i2c8 {
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-07 3:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-07 3:12 [PATCH 0/6] ARM: dts: aspeed: Add Everest LED descriptions Joel Stanley
2021-06-07 3:12 ` [PATCH 1/6] ARM: dts: aspeed: everest: Add system level indicator leds Joel Stanley
2021-06-07 3:12 ` [PATCH 2/6] ARM: dts: aspeed: everest: Add nvme and fan " Joel Stanley
2021-06-07 3:12 ` [PATCH 3/6] ARM: dts: aspeed: everest: Add pcie slot " Joel Stanley
2021-06-07 3:12 ` [PATCH 4/6] ARM: dts: aspeed: everest: Add dimm " Joel Stanley
2021-06-07 3:12 ` Joel Stanley [this message]
2021-06-07 3:12 ` [PATCH 6/6] ARM: dts: aspeed: everest: Add pcie cable card " Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210607031259.475020-6-joel@jms.id.au \
--to=joel@jms.id.au \
--cc=andrew@aj.id.au \
--cc=bradleyb@fuzziesquirrel.com \
--cc=eajames@linux.ibm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=vishwa@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).