From: Tinghan Shen <tinghan.shen@mediatek.com>
To: <robh+dt@kernel.org>, <matthias.bgg@gmail.com>
Cc: <devicetree@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <srv_heupstream@mediatek.com>,
<seiya.wang@mediatek.com>, <wenst@google.com>,
<Project_Global_Chrome_Upstream_Group@mediatek.com>,
Kewei Xu <kewei.xu@mediatek.com>
Subject: [PATCH 08/27] arm64: dts: mt8195: add i2c dts
Date: Wed, 16 Jun 2021 01:32:14 +0800 [thread overview]
Message-ID: <20210615173233.26682-8-tinghan.shen@mediatek.com> (raw)
In-Reply-To: <20210615173233.26682-1-tinghan.shen@mediatek.com>
From: Kewei Xu <kewei.xu@mediatek.com>
add i2c dts config for mt8195 soc.
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 105 +++++++++++++++++++++++
1 file changed, 105 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 5463e7ba1061..9b002bb6d344 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -879,12 +879,117 @@
};
};
+ i2c5: i2c@11d00000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11d00000 0 0x1000>,
+ <0 0x10220580 0 0x80>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C5>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@11d02000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11d02000 0 0x1000>,
+ <0 0x10220680 0 0x80>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
imp_iic_wrap_s: syscon@11d03000 {
compatible = "mediatek,mt8195-imp_iic_wrap_s", "syscon";
reg = <0 0x11d03000 0 0x1000>;
#clock-cells = <1>;
};
+ i2c0: i2c@11e00000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e00000 0 0x1000>,
+ <0 0x10220080 0 0x80>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C0>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ };
+
+ i2c1: i2c@11e01000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e01000 0 0x1000>,
+ <0 0x10220200 0 0x80>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C1>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11e02000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e02000 0 0x1000>,
+ <0 0x10220380 0 0x80>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C2>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@11e03000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e03000 0 0x1000>,
+ <0 0x10220480 0 0x80>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C3>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11e04000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e04000 0 0x1000>,
+ <0 0x10220500 0 0x80>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C4>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
imp_iic_wrap_w: syscon@11e05000 {
compatible = "mediatek,mt8195-imp_iic_wrap_w", "syscon";
reg = <0 0x11e05000 0 0x1000>;
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-15 21:15 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 17:32 arm64: dts: mt8195: Add Mediatek SoC MT8195 device nodes Tinghan Shen
2021-06-15 17:32 ` [PATCH 01/27] arm64: dts: mt8195: add infracfg_rst node Tinghan Shen
2021-06-16 8:01 ` Chen-Yu Tsai
2021-06-15 17:32 ` [PATCH 02/27] arm64: dts: mt8195: add pinctrl node Tinghan Shen
2021-06-15 17:32 ` [PATCH 03/27] arm64: dts: mt8195: add pwrap node Tinghan Shen
2021-06-15 17:32 ` [PATCH 05/27] arm64: dts: mt8195: add spmi node Tinghan Shen
2021-06-15 17:32 ` [PATCH 06/27] arm64: dts: mt8195: add clock controllers Tinghan Shen
2021-06-15 17:32 ` [PATCH 07/27] arm64: dts: mt8195: add power domains controller Tinghan Shen
2021-06-15 17:32 ` Tinghan Shen [this message]
2021-06-15 17:32 ` [PATCH 09/27] arm64: dts: mt8195: add spi controller Tinghan Shen
2021-06-15 17:32 ` [PATCH 10/27] arm64: dts: mt8195: add PCIe phy device node Tinghan Shen
2021-06-15 17:32 ` [PATCH 11/27] arm64: dts: mt8195: add PCIe " Tinghan Shen
2021-06-15 17:32 ` [PATCH 12/27] arm64: dts: mt8195: fix mmc driver Tinghan Shen
2021-06-16 1:30 ` Wenbin Mei
2021-06-15 17:32 ` [PATCH 13/27] arm64: dts: mt8195: add hdmi nodes Tinghan Shen
2021-06-15 17:32 ` [PATCH 14/27] arm64: dts: mt8195: add usb support Tinghan Shen
2021-06-15 17:32 ` [PATCH 15/27] arm64: dts: mt8195: add IOMMU and smi nodes Tinghan Shen
2021-06-15 17:32 ` [PATCH 16/27] arm64: dts: mt8195: add display node Tinghan Shen
2021-06-15 23:14 ` Chun-Kuang Hu
2021-06-15 17:32 ` [PATCH 17/27] arm64: dts: mt8195: add merge node Tinghan Shen
2021-06-15 17:32 ` [PATCH 18/27] arm64: dts: mt8195: add dsc node Tinghan Shen
2021-06-15 17:32 ` [PATCH 19/27] arm64: dts: mt8195: add dp_intf node Tinghan Shen
2021-06-15 17:32 ` [PATCH 20/27] arm64: dts: mt8195: fix nor_flash node Tinghan Shen
2021-06-15 17:32 ` [PATCH 21/27] arm64: dts: mt8195: add audio related nodes Tinghan Shen
2021-06-15 17:32 ` [PATCH 22/27] arm64: dts: mt8195: add edp nodes Tinghan Shen
2021-06-15 23:30 ` Chun-Kuang Hu
2021-06-15 17:32 ` [PATCH 23/27] arm64: dts: mt8195: add gce node Tinghan Shen
2021-06-18 14:07 ` Chun-Kuang Hu
2021-06-15 17:32 ` [PATCH 24/27] arm64: dts: mt8195: add gce setting for disply node Tinghan Shen
2021-06-15 17:32 ` [PATCH 25/27] arm64: dts: mt8195: add vdosys1 support for MT8195 Tinghan Shen
2021-06-15 23:23 ` Chun-Kuang Hu
2021-06-15 17:32 ` [PATCH 26/27] arm64: dts: mt8195: add scp device node Tinghan Shen
2021-06-15 17:32 ` [PATCH 27/27] arm64: dts: mt8195: add cpufreq device nodes Tinghan Shen
2021-06-18 14:21 ` arm64: dts: mt8195: Add Mediatek SoC MT8195 " Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210615173233.26682-8-tinghan.shen@mediatek.com \
--to=tinghan.shen@mediatek.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=kewei.xu@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=seiya.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=wenst@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).