linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
@ 2021-08-04  4:40 Hsin-Yi Wang
  2021-08-04  4:40 ` [PATCH v4 2/3] arm: dts: mt8183: " Hsin-Yi Wang
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Hsin-Yi Wang @ 2021-08-04  4:40 UTC (permalink / raw)
  To: Rob Herring
  Cc: Linus Walleij, Enric Balletbo Serra, Matthias Brugger, Sean Wang,
	Andy Teng, linux-gpio, devicetree, linux-arm-kernel,
	linux-mediatek, linux-kernel

Move mt8135-pinfunc.h into include/dt-bindings/pinctrl so that we can
include it in yaml examples.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 arch/arm/boot/dts/mt8135.dtsi                                   | 2 +-
 .../boot/dts => include/dt-bindings/pinctrl}/mt8135-pinfunc.h   | 0
 2 files changed, 1 insertion(+), 1 deletion(-)
 rename {arch/arm/boot/dts => include/dt-bindings/pinctrl}/mt8135-pinfunc.h (100%)

diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 0e4e835026db0..a031b36363187 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -9,7 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/mt8135-resets.h>
-#include "mt8135-pinfunc.h"
+#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
 
 / {
 	#address-cells = <2>;
diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/include/dt-bindings/pinctrl/mt8135-pinfunc.h
similarity index 100%
rename from arch/arm/boot/dts/mt8135-pinfunc.h
rename to include/dt-bindings/pinctrl/mt8135-pinfunc.h
-- 
2.32.0.554.ge1b32706d8-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v4 2/3] arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
  2021-08-04  4:40 [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl Hsin-Yi Wang
@ 2021-08-04  4:40 ` Hsin-Yi Wang
  2021-08-04  4:40 ` [PATCH v4 3/3] dt-bindings: mediatek: convert pinctrl to yaml Hsin-Yi Wang
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Hsin-Yi Wang @ 2021-08-04  4:40 UTC (permalink / raw)
  To: Rob Herring
  Cc: Linus Walleij, Enric Balletbo Serra, Matthias Brugger, Sean Wang,
	Andy Teng, linux-gpio, devicetree, linux-arm-kernel,
	linux-mediatek, linux-kernel

Move mt8183-pinfunc.h into include/dt-bindings/pinctrl so that we can
include it in yaml examples.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi                        | 2 +-
 .../mediatek => include/dt-bindings/pinctrl}/mt8183-pinfunc.h   | 0
 2 files changed, 1 insertion(+), 1 deletion(-)
 rename {arch/arm64/boot/dts/mediatek => include/dt-bindings/pinctrl}/mt8183-pinfunc.h (100%)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index f90df6439c088..1933045da95de 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -14,7 +14,7 @@
 #include <dt-bindings/reset-controller/mt8183-resets.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/thermal/thermal.h>
-#include "mt8183-pinfunc.h"
+#include <dt-bindings/pinctrl/mt8183-pinfunc.h>
 
 / {
 	compatible = "mediatek,mt8183";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h b/include/dt-bindings/pinctrl/mt8183-pinfunc.h
similarity index 100%
rename from arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h
rename to include/dt-bindings/pinctrl/mt8183-pinfunc.h
-- 
2.32.0.554.ge1b32706d8-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v4 3/3] dt-bindings: mediatek: convert pinctrl to yaml
  2021-08-04  4:40 [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl Hsin-Yi Wang
  2021-08-04  4:40 ` [PATCH v4 2/3] arm: dts: mt8183: " Hsin-Yi Wang
@ 2021-08-04  4:40 ` Hsin-Yi Wang
  2021-08-05  9:02 ` [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl Matthias Brugger
  2021-08-11  8:53 ` Linus Walleij
  3 siblings, 0 replies; 6+ messages in thread
From: Hsin-Yi Wang @ 2021-08-04  4:40 UTC (permalink / raw)
  To: Rob Herring
  Cc: Linus Walleij, Enric Balletbo Serra, Matthias Brugger, Sean Wang,
	Andy Teng, linux-gpio, devicetree, linux-arm-kernel,
	linux-mediatek, linux-kernel

Convert mt65xx, mt6796, mt7622, mt8183 bindings to yaml.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v3->v4:
- update MAINTAINERS
v2->v3:
- fix pattern regex '-pins'
- drop duplicate enum that constraints already have
- fix typos
v1->v2:
- fix a few minItems/maxItems
- convert text constraints into schema in mt7622
- fix pattern regex
---
 .../pinctrl/mediatek,mt65xx-pinctrl.yaml      | 206 ++++++++
 .../pinctrl/mediatek,mt6797-pinctrl.yaml      | 173 +++++++
 .../pinctrl/mediatek,mt7622-pinctrl.yaml      | 373 +++++++++++++
 .../pinctrl/mediatek,mt8183-pinctrl.yaml      | 228 ++++++++
 .../bindings/pinctrl/pinctrl-mt65xx.txt       | 156 ------
 .../bindings/pinctrl/pinctrl-mt6797.txt       |  83 ---
 .../bindings/pinctrl/pinctrl-mt7622.txt       | 490 ------------------
 .../bindings/pinctrl/pinctrl-mt8183.txt       | 132 -----
 MAINTAINERS                                   |   6 +-
 9 files changed, 984 insertions(+), 863 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
new file mode 100644
index 0000000000000..f8e6e138dc13a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT65xx Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-pinctrl
+      - mediatek,mt2712-pinctrl
+      - mediatek,mt6397-pinctrl
+      - mediatek,mt7623-pinctrl
+      - mediatek,mt8127-pinctrl
+      - mediatek,mt8135-pinctrl
+      - mediatek,mt8167-pinctrl
+      - mediatek,mt8173-pinctrl
+      - mediatek,mt8516-pinctrl
+
+  reg:
+    maxItems: 1
+
+  pins-are-numbered:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Specify the subnodes are using numbered pinmux to specify pins.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  mediatek,pctl-regmap:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    description: |
+      Should be phandles of the syscfg node.
+
+  interrupt-controller: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - pins-are-numbered
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up:
+            description: |
+              Besides generic pinconfig options, it can be used as the pull up
+              settings for 2 pull resistors, R0 and R1. User can configure those
+              special pins. Some macros have been defined for this usage, such
+              as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
+              valid arguments.
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            description: |
+              Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
+              etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8135-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        syscfg_pctl_a: syscfg-pctl-a@10005000 {
+          compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+          reg = <0 0x10005000 0 0x1000>;
+        };
+
+        syscfg_pctl_b: syscfg-pctl-b@1020c020 {
+          compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+          reg = <0 0x1020C020 0 0x1000>;
+        };
+
+        pinctrl@1c20800 {
+          compatible = "mediatek,mt8135-pinctrl";
+          reg = <0 0x1000B000 0 0x1000>;
+          mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
+          pins-are-numbered;
+          gpio-controller;
+          #gpio-cells = <2>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+              <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+
+          i2c0_pins_a: i2c0-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
+                <MT8135_PIN_101_SCL0__FUNC_SCL0>;
+              bias-disable;
+            };
+          };
+
+          i2c1_pins_a: i2c1-0 {
+            pins {
+              pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
+                <MT8135_PIN_196_SCL1__FUNC_SCL1>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+          };
+
+          i2c2_pins_a: i2c2-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
+              bias-pull-down;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
+              bias-pull-up;
+            };
+          };
+
+          i2c3_pins_a: i2c3-0 {
+            pins1 {
+              pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
+                <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins2 {
+              pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
+                <MT8135_PIN_36_SDA3__FUNC_SDA3>;
+              output-low;
+              bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+            };
+
+            pins3 {
+              pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
+                <MT8135_PIN_60_JTDI__FUNC_JTDI>;
+              drive-strength = <32>;
+            };
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
new file mode 100644
index 0000000000000..76a6df75ed9c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6797 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT6797 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt6797-pinctrl
+
+  reg:
+    minItems: 5
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: iocfgl
+      - const: iocfgb
+      - const: iocfgr
+      - const: iocfgt
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - "#gpio-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 8, 12, 16]
+
+          slew-rate:
+            enum: [0, 1]
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,tdsel:
+            description: |
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description: |
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt6797-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6797-pinctrl";
+            reg = <0 0x10005000 0 0x1000>,
+                  <0 0x10002000 0 0x400>,
+                  <0 0x10002400 0 0x400>,
+                  <0 0x10002800 0 0x400>,
+                  <0 0x10002C00 0 0x400>;
+            reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt";
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            uart_pins_a: uart-0 {
+                pins1 {
+                    pinmux = <MT6797_GPIO232__FUNC_URXD1>,
+                            <MT6797_GPIO233__FUNC_UTXD1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
new file mode 100644
index 0000000000000..0feecd376c694
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -0,0 +1,373 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7622 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT7622 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-pinctrl
+      - mediatek,mt7629-pinctrl
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+if:
+  required:
+    - interrupt-controller
+then:
+  required:
+    - reg-names
+    - interrupts
+    - "#interrupt-cells"
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'mux':
+        type: object
+        additionalProperties: false
+        description: |
+          pinmux configuration nodes.
+        $ref: "/schemas/pinctrl/pinmux-node.yaml"
+        properties:
+          function:
+            description: |
+              A string containing the name of the function to mux to the group.
+            enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
+                   spi, tdm, uart, watchdog, wifi]
+
+          groups:
+            description: |
+              An array of strings. Each string contains the name of a group.
+
+          drive-strength:
+            enum: [4, 8, 12, 16]
+
+        required:
+          - groups
+          - function
+
+        allOf:
+          - if:
+              properties:
+                function:
+                  const: emmc
+            then:
+              properties:
+                groups:
+                  enum: [emmc, emmc_rst]
+          - if:
+              properties:
+                function:
+                  const: eth
+            then:
+              properties:
+                groups:
+                  enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+                         rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+          - if:
+              properties:
+                function:
+                  const: i2c
+            then:
+              properties:
+                groups:
+                  enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0,
+                         i2c2_1, i2c2_2]
+          - if:
+              properties:
+                function:
+                  const: i2s
+            then:
+              properties:
+                groups:
+                  enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+                         i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+                         i2s1_out_data, i2s2_out_data, i2s3_out_data,
+                         i2s4_out_data]
+          - if:
+              properties:
+                function:
+                  const: ir
+            then:
+              properties:
+                groups:
+                  enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx]
+          - if:
+              properties:
+                function:
+                  const: led
+            then:
+              properties:
+                groups:
+                  enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led,
+                         ephy4_led, wled, wf2g_led, wf5g_led]
+          - if:
+              properties:
+                function:
+                  const: flash
+            then:
+              properties:
+                groups:
+                  enum: [par_nand, snfi, spi_nor]
+          - if:
+              properties:
+                function:
+                  const: pcie
+            then:
+              properties:
+                groups:
+                  enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+                         pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+                         pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+                         pcie_wake, pcie_clkreq]
+          - if:
+              properties:
+                function:
+                  const: pmic
+            then:
+              properties:
+                groups:
+                  enum: [pmic_bus]
+          - if:
+              properties:
+                function:
+                  const: pwm
+            then:
+              properties:
+                groups:
+                  enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+                         pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+                         pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+                         pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+                         pwm_ch7_0, pwm_0, pwm_1]
+          - if:
+              properties:
+                function:
+                  const: sd
+            then:
+              properties:
+                groups:
+                  enum: [sd_0, sd_1]
+          - if:
+              properties:
+                function:
+                  const: spi
+            then:
+              properties:
+                groups:
+                  enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold,
+                         spic2_0, spi_0, spi_1, spi_wp, spi_hold]
+          - if:
+              properties:
+                function:
+                  const: tdm
+            then:
+              properties:
+                groups:
+                  enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws,
+                         tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws,
+                         tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data]
+          - if:
+              properties:
+                function:
+                  const: uart
+            then:
+              properties:
+                groups:
+                  enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts,
+                         uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx,
+                         uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts,
+                         uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx,
+                         uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts,
+                         uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts,
+                         uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd,
+                         uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd,
+                         uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts,
+                         uart2_1_txd_rxd, uart2_1_cts_rts]
+          - if:
+              properties:
+                function:
+                  const: watchdog
+            then:
+              properties:
+                groups:
+                  enum: [watchdog]
+          - if:
+              properties:
+                function:
+                  const: wifi
+            then:
+              properties:
+                groups:
+                  enum: [wf0_2g, wf0_5g]
+
+      'conf':
+        type: object
+        additionalProperties: false
+        description: |
+          pinconf configuration nodes.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          groups:
+            description: |
+              An array of strings. Each string contains the name of a group.
+              Valid values are the same as the pinmux node.
+
+          pins:
+            description: |
+              An array of strings. Each string contains the name of a pin.
+            enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+                   RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+                   I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+                   I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+                   G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+                   G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+                   NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+                   MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+                   MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+                   MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+                   MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+                   PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+                   GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+                   PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+                   AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+                   PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+                   WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+                   WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+                   EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+                   EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+                   WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+                   UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+                   UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+                   PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+                   GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+                   TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+                   WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-enable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [4, 8, 12, 16]
+
+          slew-rate:
+            enum: [0, 1]
+
+          mediatek,tdsel:
+            description: |
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description: |
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pins
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10211000 {
+          compatible = "mediatek,mt7622-pinctrl";
+          reg = <0 0x10211000 0 0x1000>;
+          gpio-controller;
+          #gpio-cells = <2>;
+
+          pinctrl_eth_default: eth-0 {
+            mux-mdio {
+              groups = "mdc_mdio";
+              function = "eth";
+              drive-strength = <12>;
+            };
+
+            mux-gmac2 {
+              groups = "rgmii_via_gmac2";
+              function = "eth";
+              drive-strength = <12>;
+            };
+
+            mux-esw {
+              groups = "esw";
+              function = "eth";
+              drive-strength = <8>;
+            };
+
+            conf-mdio {
+              pins = "MDC";
+              bias-pull-up;
+            };
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
new file mode 100644
index 0000000000000..cc1509e9b981b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8183 Pin Controller Device Tree Bindings
+
+maintainers:
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |+
+  The MediaTek's MT8183 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8183-pinctrl
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: iocfg0
+      - const: iocfg1
+      - const: iocfg2
+      - const: iocfg3
+      - const: iocfg4
+      - const: iocfg5
+      - const: iocfg6
+      - const: iocfg7
+      - const: iocfg8
+      - const: eint
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO
+      binding is used, the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+
+  gpio-ranges:
+    minItems: 1
+    maxItems: 5
+    description: |
+      GPIO valid number range.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+
+patternProperties:
+  '-[0-9]+$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      'pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+        $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+        properties:
+          pinmux:
+            description:
+              integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in <soc>-pinfunc.h directly.
+
+          bias-disable: true
+
+          bias-pull-up: true
+
+          bias-pull-down: true
+
+          input-enable: true
+
+          input-disable: true
+
+          output-low: true
+
+          output-high: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          mediatek,drive-strength-adv:
+            description: |
+              Describe the specific driving setup property.
+              For I2C pins, the existing generic driving setup can only support
+              2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
+              can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
+              driving setup, the existing generic setup will be disabled.
+              The specific driving setup is controlled by E1E0EN.
+              When E1=0/E0=0, the strength is 0.125mA.
+              When E1=0/E0=1, the strength is 0.25mA.
+              When E1=1/E0=0, the strength is 0.5mA.
+              When E1=1/E0=1, the strength is 1mA.
+              EN is used to enable or disable the specific driving setup.
+              Valid arguments are described as below:
+              0: (E1, E0, EN) = (0, 0, 0)
+              1: (E1, E0, EN) = (0, 0, 1)
+              2: (E1, E0, EN) = (0, 1, 0)
+              3: (E1, E0, EN) = (0, 1, 1)
+              4: (E1, E0, EN) = (1, 0, 0)
+              5: (E1, E0, EN) = (1, 0, 1)
+              6: (E1, E0, EN) = (1, 1, 0)
+              7: (E1, E0, EN) = (1, 1, 1)
+              So the valid arguments are from 0 to 7.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,tdsel:
+            description: |
+              An integer describing the steps for output level shifter duty
+              cycle when asserted (high pulse width adjustment). Valid arguments
+              are from 0 to 15.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          mediatek,rdsel:
+            description: |
+              An integer describing the steps for input level shifter duty cycle
+              when asserted (high pulse width adjustment). Valid arguments are
+              from 0 to 63.
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+        required:
+          - pinmux
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/mt8183-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+          compatible = "mediatek,mt8183-pinctrl";
+          reg = <0 0x10005000 0 0x1000>,
+                <0 0x11f20000 0 0x1000>,
+                <0 0x11e80000 0 0x1000>,
+                <0 0x11e70000 0 0x1000>,
+                <0 0x11e90000 0 0x1000>,
+                <0 0x11d30000 0 0x1000>,
+                <0 0x11d20000 0 0x1000>,
+                <0 0x11c50000 0 0x1000>,
+                <0 0x11f30000 0 0x1000>,
+                <0 0x1000b000 0 0x1000>;
+          reg-names = "iocfg0", "iocfg1", "iocfg2",
+                "iocfg3", "iocfg4", "iocfg5",
+                "iocfg6", "iocfg7", "iocfg8",
+                "eint";
+          gpio-controller;
+          #gpio-cells = <2>;
+          gpio-ranges = <&pio 0 0 192>;
+          interrupt-controller;
+          interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+          #interrupt-cells = <2>;
+
+          i2c0_pins_a: i2c-0 {
+            pins1 {
+              pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+                <PINMUX_GPIO49__FUNC_SDA5>;
+              mediatek,pull-up-adv = <3>;
+              mediatek,drive-strength-adv = <7>;
+            };
+          };
+
+          i2c1_pins_a: i2c-1 {
+            pins {
+              pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+                <PINMUX_GPIO51__FUNC_SDA3>;
+              mediatek,pull-down-adv = <2>;
+              mediatek,drive-strength-adv = <4>;
+            };
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
deleted file mode 100644
index 5fe2c26c28bf1..0000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
+++ /dev/null
@@ -1,156 +0,0 @@
-* Mediatek MT65XX Pin Controller
-
-The Mediatek's Pin controller is used to control SoC pins.
-
-Required properties:
-- compatible: value should be one of the following.
-	"mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl.
-	"mediatek,mt2712-pinctrl", compatible with mt2712 pinctrl.
-	"mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
-	"mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl.
-	"mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
-	"mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
-	"mediatek,mt8167-pinctrl", compatible with mt8167 pinctrl.
-	"mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
-	"mediatek,mt8365-pinctrl", compatible with mt8365 pinctrl.
-	"mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl.
-- pins-are-numbered: Specify the subnodes are using numbered pinmux to
-  specify pins.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-  binding is used, the amount of cells must be specified as 2. See the below
-  mentioned gpio binding representation for description of particular cells.
-
-	Eg: <&pio 6 0>
-	<[phandle of the gpio controller node]
-	[line number within the gpio controller]
-	[flags]>
-
-	Values for gpio specifier:
-	- Line number: is a value between 0 to 202.
-	- Flags:  bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
-            Only the following flags are supported:
-            0 - GPIO_ACTIVE_HIGH
-            1 - GPIO_ACTIVE_LOW
-
-Optional properties:
-- mediatek,pctl-regmap: Should be a phandle of the syscfg node.
-- reg: physicall address base for EINT registers
-- interrupt-controller: Marks the device node as an interrupt controller
-- #interrupt-cells: Should be two.
-- interrupts : The interrupt outputs from the controller.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-A pinctrl node should contain at least one subnodes representing the
-pinctrl groups available on the machine. Each subnode will list the
-pins it needs, and how they should be configured, with regard to muxer
-configuration, pullups, drive strength, input enable/disable and input schmitt.
-
-    node {
-	pinmux = <PIN_NUMBER_PINMUX>;
-	GENERIC_PINCONFIG;
-    };
-
-Required properties:
-- pinmux: integer array, represents gpio pin number and mux setting.
-    Supported pin number and mux varies for different SoCs, and are defined
-    as macros in boot/dts/<soc>-pinfunc.h directly.
-
-Optional properties:
-- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
-    bias-pull-down, bias-pull-up, input-enable, input-disable, output-low, output-high,
-    input-schmitt-enable, input-schmitt-disable and drive-strength are valid.
-
-    Some special pins have extra pull up strength, there are R0 and R1 pull-up
-    resistors available, but for user, it's only need to set R1R0 as 00, 01, 10 or 11.
-    So when config bias-pull-up, it support arguments for those special pins.
-    Some macros have been defined for this usage, such as MTK_PUPD_SET_R1R0_00.
-    See dt-bindings/pinctrl/mt65xx.h.
-
-    When config drive-strength, it can support some arguments, such as
-    MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
-
-Examples:
-
-#include "mt8135-pinfunc.h"
-
-...
-{
-	syscfg_pctl_a: syscfg-pctl-a@10005000 {
-		compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
-		reg = <0 0x10005000 0 0x1000>;
-	};
-
-	syscfg_pctl_b: syscfg-pctl-b@1020c020 {
-		compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
-		reg = <0 0x1020C020 0 0x1000>;
-	};
-
-	pinctrl@1c20800 {
-		compatible = "mediatek,mt8135-pinctrl";
-		reg = <0 0x1000B000 0 0x1000>;
-		mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
-		pins-are-numbered;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-
-		i2c0_pins_a: i2c0@0 {
-			pins1 {
-				pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
-					 <MT8135_PIN_101_SCL0__FUNC_SCL0>;
-				bias-disable;
-			};
-		};
-
-		i2c1_pins_a: i2c1@0 {
-			pins {
-				pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
-					 <MT8135_PIN_196_SCL1__FUNC_SCL1>;
-				bias-pull-up = <55>;
-			};
-		};
-
-		i2c2_pins_a: i2c2@0 {
-			pins1 {
-				pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
-				bias-pull-down;
-			};
-
-			pins2 {
-				pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
-				bias-pull-up;
-			};
-		};
-
-		i2c3_pins_a: i2c3@0 {
-			pins1 {
-				pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
-					 <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
-				bias-pull-up = <55>;
-			};
-
-			pins2 {
-				pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
-					 <MT8135_PIN_36_SDA3__FUNC_SDA3>;
-				output-low;
-				bias-pull-up = <55>;
-			};
-
-			pins3 {
-				pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
-					 <MT8135_PIN_60_JTDI__FUNC_JTDI>;
-				drive-strength = <32>;
-			};
-		};
-
-		...
-	}
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt
deleted file mode 100644
index bd83401e6179a..0000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* MediaTek MT6797 Pin Controller
-
-The MediaTek's MT6797 Pin controller is used to control SoC pins.
-
-Required properties:
-- compatible: Value should be one of the following.
-              "mediatek,mt6797-pinctrl", compatible with mt6797 pinctrl.
-- reg:        Should contain address and size for gpio, iocfgl, iocfgb,
-              iocfgr and iocfgt register bases.
-- reg-names:  An array of strings describing the "reg" entries. Must
-              contain "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt".
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be two. The first cell is the gpio pin number
-               and the second cell is used for optional parameters.
-
-Optional properties:
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- interrupts : The interrupt outputs from the controller.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-A pinctrl node should contain at least one subnodes representing the
-pinctrl groups available on the machine. Each subnode will list the
-pins it needs, and how they should be configured, with regard to muxer
-configuration, pullups, drive strength, input enable/disable and input schmitt.
-
-    node {
-        pinmux = <PIN_NUMBER_PINMUX>;
-        GENERIC_PINCONFIG;
-    };
-
-Required properties:
-- pinmux: Integer array, represents gpio pin number and mux setting.
-    Supported pin number and mux varies for different SoCs, and are defined
-    as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
-
-Optional properties:
-- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
-    bias-pull, bias-pull-down, input-enable, input-schmitt-enable,
-    input-schmitt-disable, output-enable output-low, output-high,
-    drive-strength, and slew-rate are valid.
-
-    Valid arguments for 'slew-rate' are '0' for no slew rate controlled and
-    '1' for slower slew rate respectively. Valid arguments for 'drive-strength'
-    is limited, such as 2, 4, 8, 12, or 16 in mA.
-
-    Some optional vendor properties as defined are valid to specify in a
-    pinconf subnode:
-    - mediatek,tdsel: An integer describing the steps for output level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 15.
-    - mediatek,rdsel: An integer describing the steps for input level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 63.
-    - mediatek,pull-up-adv: An integer describing the code R1R0 as 0, 1, 2
-      or 3 for the advanced pull-up resistors.
-    - mediatek,pull-down-adv: An integer describing the code R1R0 as 0, 1, 2,
-      or 3 for the advanced pull-down resistors.
-
-Examples:
-
-        pio: pinctrl@10005000 {
-                compatible = "mediatek,mt6797-pinctrl";
-                reg = <0 0x10005000 0 0x1000>,
-                      <0 0x10002000 0 0x400>,
-                      <0 0x10002400 0 0x400>,
-                      <0 0x10002800 0 0x400>,
-                      <0 0x10002C00 0 0x400>;
-                reg-names = "gpio", "iocfgl", "iocfgb",
-                            "iocfgr", "iocfgt";
-                gpio-controller;
-                #gpio-cells = <2>;
-
-                uart1_pins_a: uart1 {
-                        pins1 {
-                                pinmux = <MT6797_GPIO232__FUNC_URXD1>,
-                                         <MT6797_GPIO233__FUNC_UTXD1>;
-                        };
-                };
-        };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
deleted file mode 100644
index 7a7aca1ed705b..0000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
+++ /dev/null
@@ -1,490 +0,0 @@
-== MediaTek MT7622 pinctrl controller ==
-
-Required properties for the root node:
- - compatible: Should be one of the following
-	       "mediatek,mt7622-pinctrl" for MT7622 SoC
-	       "mediatek,mt7629-pinctrl" for MT7629 SoC
- - reg: offset and length of the pinctrl space
-
- - gpio-controller: Marks the device node as a GPIO controller.
- - #gpio-cells: Should be two. The first cell is the pin number and the
-   second is the GPIO flags.
-
-Optional properties:
-- interrupt-controller  : Marks the device node as an interrupt controller
-
-If the property interrupt-controller is defined, following property is required
-- reg-names: A string describing the "reg" entries. Must contain "eint".
-- interrupts : The interrupt output from the controller.
-- #interrupt-cells: Should be two.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-MT7622 pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as pull-up, slew rate, etc.
-
-We support 2 types of configuration nodes. Those nodes can be either pinmux
-nodes or pinconf nodes. Each configuration node can consist of multiple nodes
-describing the pinmux and pinconf options.
-
-The name of each subnode doesn't matter as long as it is unique; all subnodes
-should be enumerated and processed purely based on their content.
-
-== pinmux nodes content ==
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pinmux subnode:
-
-Required properties are:
- - groups: An array of strings. Each string contains the name of a group.
-  Valid values for these names are listed below.
- - function: A string containing the name of the function to mux to the
-  group. Valid values for function names are listed below.
-
-== pinconf nodes content ==
-
-The following generic properties as defined in pinctrl-bindings.txt are valid
-to specify in a pinconf subnode:
-
-Required properties are:
- - pins: An array of strings. Each string contains the name of a pin.
-  Valid values for these names are listed below.
- - groups: An array of strings. Each string contains the name of a group.
-  Valid values for these names are listed below.
-
-Optional properies are:
- bias-disable, bias-pull, bias-pull-down, input-enable,
- input-schmitt-enable, input-schmitt-disable, output-enable
- output-low, output-high, drive-strength, slew-rate
-
- Valid arguments for 'slew-rate' are '0' for no slew rate controlled and '1' for
- slower slew rate respectively.
- Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA.
-
-The following specific properties as defined are valid to specify in a pinconf
-subnode:
-
-Optional properties are:
- - mediatek,tdsel: An integer describing the steps for output level shifter duty
-   cycle when asserted (high pulse width adjustment). Valid arguments are from 0
-   to 15.
- - mediatek,rdsel: An integer describing the steps for input level shifter duty
-   cycle when asserted (high pulse width adjustment). Valid arguments are from 0
-   to 63.
-
-== Valid values for pins, function and groups on MT7622 ==
-
-Valid values for pins are:
-pins can be referenced via the pin names as the below table shown and the
-related physical number is also put ahead of those names which helps cross
-references to pins between groups to know whether pins assignment conflict
-happens among devices try to acquire those available pins.
-
-	Pin #:  Valid values for pins
-	-----------------------------
-	PIN 0: "GPIO_A"
-	PIN 1: "I2S1_IN"
-	PIN 2: "I2S1_OUT"
-	PIN 3: "I2S_BCLK"
-	PIN 4: "I2S_WS"
-	PIN 5: "I2S_MCLK"
-	PIN 6: "TXD0"
-	PIN 7: "RXD0"
-	PIN 8: "SPI_WP"
-	PIN 9: "SPI_HOLD"
-	PIN 10: "SPI_CLK"
-	PIN 11: "SPI_MOSI"
-	PIN 12: "SPI_MISO"
-	PIN 13: "SPI_CS"
-	PIN 14: "I2C_SDA"
-	PIN 15: "I2C_SCL"
-	PIN 16: "I2S2_IN"
-	PIN 17: "I2S3_IN"
-	PIN 18: "I2S4_IN"
-	PIN 19: "I2S2_OUT"
-	PIN 20: "I2S3_OUT"
-	PIN 21: "I2S4_OUT"
-	PIN 22: "GPIO_B"
-	PIN 23: "MDC"
-	PIN 24: "MDIO"
-	PIN 25: "G2_TXD0"
-	PIN 26: "G2_TXD1"
-	PIN 27: "G2_TXD2"
-	PIN 28: "G2_TXD3"
-	PIN 29: "G2_TXEN"
-	PIN 30: "G2_TXC"
-	PIN 31: "G2_RXD0"
-	PIN 32: "G2_RXD1"
-	PIN 33: "G2_RXD2"
-	PIN 34: "G2_RXD3"
-	PIN 35: "G2_RXDV"
-	PIN 36: "G2_RXC"
-	PIN 37: "NCEB"
-	PIN 38: "NWEB"
-	PIN 39: "NREB"
-	PIN 40: "NDL4"
-	PIN 41: "NDL5"
-	PIN 42: "NDL6"
-	PIN 43: "NDL7"
-	PIN 44: "NRB"
-	PIN 45: "NCLE"
-	PIN 46: "NALE"
-	PIN 47: "NDL0"
-	PIN 48: "NDL1"
-	PIN 49: "NDL2"
-	PIN 50: "NDL3"
-	PIN 51: "MDI_TP_P0"
-	PIN 52: "MDI_TN_P0"
-	PIN 53: "MDI_RP_P0"
-	PIN 54: "MDI_RN_P0"
-	PIN 55: "MDI_TP_P1"
-	PIN 56: "MDI_TN_P1"
-	PIN 57: "MDI_RP_P1"
-	PIN 58: "MDI_RN_P1"
-	PIN 59: "MDI_RP_P2"
-	PIN 60: "MDI_RN_P2"
-	PIN 61: "MDI_TP_P2"
-	PIN 62: "MDI_TN_P2"
-	PIN 63: "MDI_TP_P3"
-	PIN 64: "MDI_TN_P3"
-	PIN 65: "MDI_RP_P3"
-	PIN 66: "MDI_RN_P3"
-	PIN 67: "MDI_RP_P4"
-	PIN 68: "MDI_RN_P4"
-	PIN 69: "MDI_TP_P4"
-	PIN 70: "MDI_TN_P4"
-	PIN 71: "PMIC_SCL"
-	PIN 72: "PMIC_SDA"
-	PIN 73: "SPIC1_CLK"
-	PIN 74: "SPIC1_MOSI"
-	PIN 75: "SPIC1_MISO"
-	PIN 76: "SPIC1_CS"
-	PIN 77: "GPIO_D"
-	PIN 78: "WATCHDOG"
-	PIN 79: "RTS3_N"
-	PIN 80: "CTS3_N"
-	PIN 81: "TXD3"
-	PIN 82: "RXD3"
-	PIN 83: "PERST0_N"
-	PIN 84: "PERST1_N"
-	PIN 85: "WLED_N"
-	PIN 86: "EPHY_LED0_N"
-	PIN 87: "AUXIN0"
-	PIN 88: "AUXIN1"
-	PIN 89: "AUXIN2"
-	PIN 90: "AUXIN3"
-	PIN 91: "TXD4"
-	PIN 92: "RXD4"
-	PIN 93: "RTS4_N"
-	PIN 94: "CST4_N"
-	PIN 95: "PWM1"
-	PIN 96: "PWM2"
-	PIN 97: "PWM3"
-	PIN 98: "PWM4"
-	PIN 99: "PWM5"
-	PIN 100: "PWM6"
-	PIN 101: "PWM7"
-	PIN 102: "GPIO_E"
-
-Valid values for function are:
-	"emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie",
-	"pmic", "pwm", "sd", "spi", "tdm", "uart", "watchdog"
-
-Valid values for groups are:
-additional data is put followingly with valid value allowing us to know which
-applicable function and which relevant pins (in pin#) are able applied for that
-group.
-
-	Valid value			function	pins (in pin#)
-	-------------------------------------------------------------------------
-	"emmc"				"emmc"		40, 41, 42, 43, 44, 45,
-							47, 48, 49, 50
-	"emmc_rst"			"emmc"		37
-	"esw"				"eth"		51, 52, 53, 54, 55, 56,
-							57, 58, 59, 60, 61, 62,
-							63, 64, 65, 66, 67, 68,
-							69, 70
-	"esw_p0_p1"			"eth"		51, 52, 53, 54, 55, 56,
-							57, 58
-	"esw_p2_p3_p4"			"eth"		59, 60, 61, 62, 63, 64,
-							65, 66, 67, 68, 69, 70
-	"rgmii_via_esw"			"eth"		59, 60, 61, 62, 63, 64,
-							65, 66, 67, 68, 69, 70
-	"rgmii_via_gmac1"		"eth"		59, 60, 61, 62, 63, 64,
-							65, 66, 67, 68, 69, 70
-	"rgmii_via_gmac2"		"eth"		25, 26, 27, 28, 29, 30,
-							31, 32, 33, 34, 35, 36
-	"mdc_mdio"			"eth"		23, 24
-	"i2c0"				"i2c"		14, 15
-	"i2c1_0"			"i2c"		55, 56
-	"i2c1_1"			"i2c"		73, 74
-	"i2c1_2"			"i2c"		87, 88
-	"i2c2_0"			"i2c"		57, 58
-	"i2c2_1"			"i2c"		75, 76
-	"i2c2_2"			"i2c"		89, 90
-	"i2s_in_mclk_bclk_ws"		"i2s"		3, 4, 5
-	"i2s1_in_data"			"i2s"		1
-	"i2s2_in_data"			"i2s"		16
-	"i2s3_in_data"			"i2s"		17
-	"i2s4_in_data"			"i2s"		18
-	"i2s_out_mclk_bclk_ws"		"i2s"		3, 4, 5
-	"i2s1_out_data"			"i2s"		2
-	"i2s2_out_data"			"i2s"		19
-	"i2s3_out_data"			"i2s"		20
-	"i2s4_out_data"			"i2s"		21
-	"ir_0_tx"			"ir"		16
-	"ir_1_tx"			"ir"		59
-	"ir_2_tx"			"ir"		99
-	"ir_0_rx"			"ir"		17
-	"ir_1_rx"			"ir"		60
-	"ir_2_rx"			"ir"		100
-	"ephy_leds"			"led"		86, 91, 92, 93, 94
-	"ephy0_led"			"led"		86
-	"ephy1_led"			"led"		91
-	"ephy2_led"			"led"		92
-	"ephy3_led"			"led"		93
-	"ephy4_led"			"led"		94
-	"wled"				"led"		85
-	"par_nand"			"flash"		37, 38, 39, 40, 41, 42,
-							43, 44, 45, 46, 47, 48,
-							49, 50
-	"snfi"				"flash"		8, 9, 10, 11, 12, 13
-	"spi_nor"			"flash"		8, 9, 10, 11, 12, 13
-	"pcie0_0_waken"			"pcie"		14
-	"pcie0_1_waken"			"pcie"		79
-	"pcie1_0_waken"			"pcie"		14
-	"pcie0_0_clkreq"		"pcie"		15
-	"pcie0_1_clkreq"		"pcie"		80
-	"pcie1_0_clkreq"		"pcie"		15
-	"pcie0_pad_perst"		"pcie"		83
-	"pcie1_pad_perst"		"pcie"		84
-	"pmic_bus"			"pmic"		71, 72
-	"pwm_ch1_0"			"pwm"		51
-	"pwm_ch1_1"			"pwm"		73
-	"pwm_ch1_2"			"pwm"		95
-	"pwm_ch2_0"			"pwm"		52
-	"pwm_ch2_1"			"pwm"		74
-	"pwm_ch2_2"			"pwm"		96
-	"pwm_ch3_0"			"pwm"		53
-	"pwm_ch3_1"			"pwm"		75
-	"pwm_ch3_2"			"pwm"		97
-	"pwm_ch4_0"			"pwm"		54
-	"pwm_ch4_1"			"pwm"		67
-	"pwm_ch4_2"			"pwm"		76
-	"pwm_ch4_3"			"pwm"		98
-	"pwm_ch5_0"			"pwm"		68
-	"pwm_ch5_1"			"pwm"		77
-	"pwm_ch5_2"			"pwm"		99
-	"pwm_ch6_0"			"pwm"		69
-	"pwm_ch6_1"			"pwm"		78
-	"pwm_ch6_2"			"pwm"		81
-	"pwm_ch6_3"			"pwm"		100
-	"pwm_ch7_0"			"pwm"		70
-	"pwm_ch7_1"			"pwm"		82
-	"pwm_ch7_2"			"pwm"		101
-	"sd_0"				"sd"		16, 17, 18, 19, 20, 21
-	"sd_1"				"sd"		25, 26, 27, 28, 29, 30
-	"spic0_0"			"spi"		63, 64, 65, 66
-	"spic0_1"			"spi"		79, 80, 81, 82
-	"spic1_0"			"spi"		67, 68, 69, 70
-	"spic1_1"			"spi"		73, 74, 75, 76
-	"spic2_0_wp_hold"		"spi"		8, 9
-	"spic2_0"			"spi"		10, 11, 12, 13
-	"tdm_0_out_mclk_bclk_ws"	"tdm"		8, 9, 10
-	"tdm_0_in_mclk_bclk_ws"		"tdm"		11, 12, 13
-	"tdm_0_out_data"		"tdm"		20
-	"tdm_0_in_data"			"tdm"		21
-	"tdm_1_out_mclk_bclk_ws"	"tdm"		57, 58, 59
-	"tdm_1_in_mclk_bclk_ws"		"tdm"		60, 61, 62
-	"tdm_1_out_data"		"tdm"		55
-	"tdm_1_in_data"			"tdm"		56
-	"uart0_0_tx_rx"			"uart"		6, 7
-	"uart1_0_tx_rx"			"uart"		55, 56
-	"uart1_0_rts_cts"		"uart"		57, 58
-	"uart1_1_tx_rx"			"uart"		73, 74
-	"uart1_1_rts_cts"		"uart"		75, 76
-	"uart2_0_tx_rx"			"uart"		3, 4
-	"uart2_0_rts_cts"		"uart"		1, 2
-	"uart2_1_tx_rx"			"uart"		51, 52
-	"uart2_1_rts_cts"		"uart"		53, 54
-	"uart2_2_tx_rx"			"uart"		59, 60
-	"uart2_2_rts_cts"		"uart"		61, 62
-	"uart2_3_tx_rx"			"uart"		95, 96
-	"uart3_0_tx_rx"			"uart"		57, 58
-	"uart3_1_tx_rx"			"uart"		81, 82
-	"uart3_1_rts_cts"		"uart"		79, 80
-	"uart4_0_tx_rx"			"uart"		61, 62
-	"uart4_1_tx_rx"			"uart"		91, 92
-	"uart4_1_rts_cts"		"uart"		93, 94
-	"uart4_2_tx_rx"			"uart"		97, 98
-	"uart4_2_rts_cts"		"uart"		95, 96
-	"watchdog"			"watchdog"	78
-
-
-== Valid values for pins, function and groups on MT7629 ==
-
-	Pin #:  Valid values for pins
-	-----------------------------
-	PIN 0: "TOP_5G_CLK"
-	PIN 1: "TOP_5G_DATA"
-	PIN 2: "WF0_5G_HB0"
-	PIN 3: "WF0_5G_HB1"
-	PIN 4: "WF0_5G_HB2"
-	PIN 5: "WF0_5G_HB3"
-	PIN 6: "WF0_5G_HB4"
-	PIN 7: "WF0_5G_HB5"
-	PIN 8: "WF0_5G_HB6"
-	PIN 9: "XO_REQ"
-	PIN 10: "TOP_RST_N"
-	PIN 11: "SYS_WATCHDOG"
-	PIN 12: "EPHY_LED0_N_JTDO"
-	PIN 13: "EPHY_LED1_N_JTDI"
-	PIN 14: "EPHY_LED2_N_JTMS"
-	PIN 15: "EPHY_LED3_N_JTCLK"
-	PIN 16: "EPHY_LED4_N_JTRST_N"
-	PIN 17: "WF2G_LED_N"
-	PIN 18: "WF5G_LED_N"
-	PIN 19: "I2C_SDA"
-	PIN 20: "I2C_SCL"
-	PIN 21: "GPIO_9"
-	PIN 22: "GPIO_10"
-	PIN 23: "GPIO_11"
-	PIN 24: "GPIO_12"
-	PIN 25: "UART1_TXD"
-	PIN 26: "UART1_RXD"
-	PIN 27: "UART1_CTS"
-	PIN 28: "UART1_RTS"
-	PIN 29: "UART2_TXD"
-	PIN 30: "UART2_RXD"
-	PIN 31: "UART2_CTS"
-	PIN 32: "UART2_RTS"
-	PIN 33: "MDI_TP_P1"
-	PIN 34: "MDI_TN_P1"
-	PIN 35: "MDI_RP_P1"
-	PIN 36: "MDI_RN_P1"
-	PIN 37: "MDI_RP_P2"
-	PIN 38: "MDI_RN_P2"
-	PIN 39: "MDI_TP_P2"
-	PIN 40: "MDI_TN_P2"
-	PIN 41: "MDI_TP_P3"
-	PIN 42: "MDI_TN_P3"
-	PIN 43: "MDI_RP_P3"
-	PIN 44: "MDI_RN_P3"
-	PIN 45: "MDI_RP_P4"
-	PIN 46: "MDI_RN_P4"
-	PIN 47: "MDI_TP_P4"
-	PIN 48: "MDI_TN_P4"
-	PIN 49: "SMI_MDC"
-	PIN 50: "SMI_MDIO"
-	PIN 51: "PCIE_PERESET_N"
-	PIN 52: "PWM_0"
-	PIN 53: "GPIO_0"
-	PIN 54: "GPIO_1"
-	PIN 55: "GPIO_2"
-	PIN 56: "GPIO_3"
-	PIN 57: "GPIO_4"
-	PIN 58: "GPIO_5"
-	PIN 59: "GPIO_6"
-	PIN 60: "GPIO_7"
-	PIN 61: "GPIO_8"
-	PIN 62: "SPI_CLK"
-	PIN 63: "SPI_CS"
-	PIN 64: "SPI_MOSI"
-	PIN 65: "SPI_MISO"
-	PIN 66: "SPI_WP"
-	PIN 67: "SPI_HOLD"
-	PIN 68: "UART0_TXD"
-	PIN 69: "UART0_RXD"
-	PIN 70: "TOP_2G_CLK"
-	PIN 71: "TOP_2G_DATA"
-	PIN 72: "WF0_2G_HB0"
-	PIN 73: "WF0_2G_HB1"
-	PIN 74: "WF0_2G_HB2"
-	PIN 75: "WF0_2G_HB3"
-	PIN 76: "WF0_2G_HB4"
-	PIN 77: "WF0_2G_HB5"
-	PIN 78: "WF0_2G_HB6"
-
-Valid values for function are:
-	"eth", "i2c", "led", "flash", "pcie", "pwm", "spi", "uart",
-	"watchdog", "wifi"
-
-Valid values for groups are:
-	Valid value			function	pins (in pin#)
-	----------------------------------------------------------------
-	"mdc_mdio"			"eth"		23, 24
-	"i2c_0"				"i2c"		19, 20
-	"i2c_1"				"i2c"		53, 54
-	"ephy_leds"			"led"		12, 13, 14, 15, 16,
-							17, 18
-	"ephy0_led"			"led"		12
-	"ephy1_led"			"led"		13
-	"ephy2_led"			"led"		14
-	"ephy3_led"			"led"		15
-	"ephy4_led"			"led"		16
-	"wf2g_led"			"led"		17
-	"wf5g_led"			"led"		18
-	"snfi"				"flash"		62, 63, 64, 65, 66, 67
-	"spi_nor"			"flash"		62, 63, 64, 65, 66, 67
-	"pcie_pereset"			"pcie"		51
-	"pcie_wake"			"pcie"		55
-	"pcie_clkreq"			"pcie"		56
-	"pwm_0"				"pwm"		52
-	"pwm_1"				"pwm"		61
-	"spi_0"				"spi"		21, 22, 23, 24
-	"spi_1"				"spi"		62, 63, 64, 65
-	"spi_wp"			"spi"		66
-	"spi_hold"			"spi"		67
-	"uart0_txd_rxd"			"uart"		68, 69
-	"uart1_0_txd_rxd"		"uart"		25, 26
-	"uart1_0_cts_rts"		"uart"		27, 28
-	"uart1_1_txd_rxd"		"uart"		53, 54
-	"uart1_1_cts_rts"		"uart"		55, 56
-	"uart2_0_txd_rxd"		"uart"		29, 30
-	"uart2_0_cts_rts"		"uart"		31, 32
-	"uart2_1_txd_rxd"		"uart"		57, 58
-	"uart2_1_cts_rts"		"uart"		59, 60
-	"watchdog"			"watchdog"	11
-	"wf0_2g"			"wifi"		70, 71, 72, 73, 74,
-							75, 76, 77, 78
-	"wf0_5g"			"wifi"		0, 1, 2, 3, 4, 5, 6,
-							7, 8, 9, 10
-
-Example:
-
-	pio: pinctrl@10211000 {
-		compatible = "mediatek,mt7622-pinctrl";
-		reg = <0 0x10211000 0 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		pinctrl_eth_default: eth-default {
-			mux-mdio {
-				groups = "mdc_mdio";
-				function = "eth";
-				drive-strength = <12>;
-			};
-
-			mux-gmac2 {
-				groups = "gmac2";
-				function = "eth";
-				drive-strength = <12>;
-			};
-
-			mux-esw {
-				groups = "esw";
-				function = "eth";
-				drive-strength = <8>;
-			};
-
-			conf-mdio {
-				pins = "MDC";
-				bias-pull-up;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt
deleted file mode 100644
index eccbe3f55d3f3..0000000000000
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt
+++ /dev/null
@@ -1,132 +0,0 @@
-* Mediatek MT8183 Pin Controller
-
-The Mediatek's Pin controller is used to control SoC pins.
-
-Required properties:
-- compatible: value should be one of the following.
-	"mediatek,mt8183-pinctrl", compatible with mt8183 pinctrl.
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
-  binding is used, the amount of cells must be specified as 2. See the below
-  mentioned gpio binding representation for description of particular cells.
-- gpio-ranges : gpio valid number range.
-- reg: physical address base for gpio base registers. There are 10 GPIO
-  physical address base in mt8183.
-
-Optional properties:
-- reg-names: gpio base register names. There are 10 gpio base register
-  names in mt8183. They are "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4",
-  "iocfg5", "iocfg6", "iocfg7", "iocfg8", "eint".
-- interrupt-controller: Marks the device node as an interrupt controller
-- #interrupt-cells: Should be two.
-- interrupts : The interrupt outputs to sysirq.
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
-
-Subnode format
-A pinctrl node should contain at least one subnodes representing the
-pinctrl groups available on the machine. Each subnode will list the
-pins it needs, and how they should be configured, with regard to muxer
-configuration, pullups, drive strength, input enable/disable and input schmitt.
-
-    node {
-	pinmux = <PIN_NUMBER_PINMUX>;
-	GENERIC_PINCONFIG;
-    };
-
-Required properties:
-- pinmux: integer array, represents gpio pin number and mux setting.
-    Supported pin number and mux varies for different SoCs, and are defined
-    as macros in boot/dts/<soc>-pinfunc.h directly.
-
-Optional properties:
-- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
-    bias-pull-down, bias-pull-up, input-enable, input-disable, output-low,
-    output-high, input-schmitt-enable, input-schmitt-disable
-    and drive-strength are valid.
-
-    Some special pins have extra pull up strength, there are R0 and R1 pull-up
-    resistors available, but for user, it's only need to set R1R0 as 00, 01,
-    10 or 11. So It needs config "mediatek,pull-up-adv" or
-    "mediatek,pull-down-adv" to support arguments for those special pins.
-    Valid arguments are from 0 to 3.
-
-    mediatek,tdsel: An integer describing the steps for output level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 15.
-    mediatek,rdsel: An integer describing the steps for input level shifter
-      duty cycle when asserted (high pulse width adjustment). Valid arguments
-      are from 0 to 63.
-
-    When config drive-strength, it can support some arguments, such as
-    MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
-    It can only support 2/4/6/8/10/12/14/16mA in mt8183.
-    For I2C pins, there are existing generic driving setup and the specific
-    driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA driving
-    adjustment in generic driving setup. But in specific driving setup,
-    they can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
-    driving setup for I2C pins, the existing generic driving setup will be
-    disabled. For some special features, we need the I2C pins specific
-    driving setup. The specific driving setup is controlled by E1E0EN.
-    So we need add extra vendor driving preperty instead of
-    the generic driving property.
-    We can add "mediatek,drive-strength-adv = <XXX>;" to describe the specific
-    driving setup property. "XXX" means the value of E1E0EN. EN is 0 or 1.
-    It is used to enable or disable the specific driving setup.
-    E1E0 is used to describe the detail strength specification of the I2C pin.
-    When E1=0/E0=0, the strength is 0.125mA.
-    When E1=0/E0=1, the strength is 0.25mA.
-    When E1=1/E0=0, the strength is 0.5mA.
-    When E1=1/E0=1, the strength is 1mA.
-    So the valid arguments of "mediatek,drive-strength-adv" are from 0 to 7.
-
-Examples:
-
-#include "mt8183-pinfunc.h"
-
-...
-{
-	pio: pinctrl@10005000 {
-		compatible = "mediatek,mt8183-pinctrl";
-		reg = <0 0x10005000 0 0x1000>,
-		      <0 0x11f20000 0 0x1000>,
-		      <0 0x11e80000 0 0x1000>,
-		      <0 0x11e70000 0 0x1000>,
-		      <0 0x11e90000 0 0x1000>,
-		      <0 0x11d30000 0 0x1000>,
-		      <0 0x11d20000 0 0x1000>,
-		      <0 0x11c50000 0 0x1000>,
-		      <0 0x11f30000 0 0x1000>,
-		      <0 0x1000b000 0 0x1000>;
-		reg-names = "iocfg0", "iocfg1", "iocfg2",
-			    "iocfg3", "iocfg4", "iocfg5",
-			    "iocfg6", "iocfg7", "iocfg8",
-			    "eint";
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-ranges = <&pio 0 0 192>;
-		interrupt-controller;
-		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-
-		i2c0_pins_a: i2c0 {
-			pins1 {
-				pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
-					 <PINMUX_GPIO49__FUNC_SDA5>;
-				mediatek,pull-up-adv = <3>;
-				mediatek,drive-strength-adv = <7>;
-			};
-		};
-
-		i2c1_pins_a: i2c1 {
-			pins {
-				pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
-					 <PINMUX_GPIO51__FUNC_SDA3>;
-				mediatek,pull-down-adv = <2>;
-				mediatek,drive-strength-adv = <4>;
-			};
-		};
-		...
-	};
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 50df0c02ba030..c957c8841043b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14667,8 +14667,10 @@ PIN CONTROLLER - MEDIATEK
 M:	Sean Wang <sean.wang@kernel.org>
 L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
-F:	Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
+F:	Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
+F:	Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
+F:	Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+F:	Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
 F:	drivers/pinctrl/mediatek/
 
 PIN CONTROLLER - MICROCHIP AT91
-- 
2.32.0.554.ge1b32706d8-goog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
  2021-08-04  4:40 [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl Hsin-Yi Wang
  2021-08-04  4:40 ` [PATCH v4 2/3] arm: dts: mt8183: " Hsin-Yi Wang
  2021-08-04  4:40 ` [PATCH v4 3/3] dt-bindings: mediatek: convert pinctrl to yaml Hsin-Yi Wang
@ 2021-08-05  9:02 ` Matthias Brugger
  2021-08-11  8:48   ` Linus Walleij
  2021-08-11  8:53 ` Linus Walleij
  3 siblings, 1 reply; 6+ messages in thread
From: Matthias Brugger @ 2021-08-05  9:02 UTC (permalink / raw)
  To: Hsin-Yi Wang, Rob Herring, Linus Walleij
  Cc: Enric Balletbo Serra, Sean Wang, Andy Teng, linux-gpio,
	devicetree, linux-arm-kernel, linux-mediatek, linux-kernel

Hi Linus,

On 04/08/2021 06:40, Hsin-Yi Wang wrote:
> Move mt8135-pinfunc.h into include/dt-bindings/pinctrl so that we can
> include it in yaml examples.
> 
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> ---
>  arch/arm/boot/dts/mt8135.dtsi                                   | 2 +-
>  .../boot/dts => include/dt-bindings/pinctrl}/mt8135-pinfunc.h   | 0
>  2 files changed, 1 insertion(+), 1 deletion(-)
>  rename {arch/arm/boot/dts => include/dt-bindings/pinctrl}/mt8135-pinfunc.h (100%)
> 

If that's fine with you, I'll take patch 1+2 through my tree. IMHO the best for
patch 3 would be to go through your tree.

Sounds good?

Regards,
Matthias

> diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
> index 0e4e835026db0..a031b36363187 100644
> --- a/arch/arm/boot/dts/mt8135.dtsi
> +++ b/arch/arm/boot/dts/mt8135.dtsi
> @@ -9,7 +9,7 @@
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/reset/mt8135-resets.h>
> -#include "mt8135-pinfunc.h"
> +#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
>  
>  / {
>  	#address-cells = <2>;
> diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/include/dt-bindings/pinctrl/mt8135-pinfunc.h
> similarity index 100%
> rename from arch/arm/boot/dts/mt8135-pinfunc.h
> rename to include/dt-bindings/pinctrl/mt8135-pinfunc.h
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
  2021-08-05  9:02 ` [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl Matthias Brugger
@ 2021-08-11  8:48   ` Linus Walleij
  0 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2021-08-11  8:48 UTC (permalink / raw)
  To: Matthias Brugger
  Cc: Hsin-Yi Wang, Rob Herring, Enric Balletbo Serra, Sean Wang,
	Andy Teng, open list:GPIO SUBSYSTEM,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux ARM, moderated list:ARM/Mediatek SoC support, linux-kernel

On Thu, Aug 5, 2021 at 11:02 AM Matthias Brugger <matthias.bgg@gmail.com> wrote:

> Hi Linus,
>
> On 04/08/2021 06:40, Hsin-Yi Wang wrote:
> > Move mt8135-pinfunc.h into include/dt-bindings/pinctrl so that we can
> > include it in yaml examples.
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > ---
> >  arch/arm/boot/dts/mt8135.dtsi                                   | 2 +-
> >  .../boot/dts => include/dt-bindings/pinctrl}/mt8135-pinfunc.h   | 0
> >  2 files changed, 1 insertion(+), 1 deletion(-)
> >  rename {arch/arm/boot/dts => include/dt-bindings/pinctrl}/mt8135-pinfunc.h (100%)
> >
>
> If that's fine with you, I'll take patch 1+2 through my tree. IMHO the best for
> patch 3 would be to go through your tree.
>
> Sounds good?

It can't be done that way. Patch 3 depends on patch 1+2 to get the
include file into the right place for patch 3/3 to compile. (YAML
check.)

I will apply all three and then provide an immutable branch that you
can pull in to your tree as well. This is usually what we do with
cross-tree dependencies.

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
  2021-08-04  4:40 [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl Hsin-Yi Wang
                   ` (2 preceding siblings ...)
  2021-08-05  9:02 ` [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl Matthias Brugger
@ 2021-08-11  8:53 ` Linus Walleij
  3 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2021-08-11  8:53 UTC (permalink / raw)
  To: Hsin-Yi Wang, Matthias Brugger
  Cc: Rob Herring, Enric Balletbo Serra, Sean Wang, Andy Teng,
	open list:GPIO SUBSYSTEM,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Linux ARM, moderated list:ARM/Mediatek SoC support, linux-kernel

Hi Hsin-Yi, Matthias,

I have applied all three patches on this immutable branch:
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=ib-mt8135

Then I merged this branch into the pinctrl "devel" branch for
v5.15.

Matthias can pull the same branch into his MT SoC tree so
that the hashes will match up in the merge window. No rebasing.

The same patches will then come in to Torvalds in two ways
with the same hashes and match perfectly.

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-08-11  9:27 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-04  4:40 [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl Hsin-Yi Wang
2021-08-04  4:40 ` [PATCH v4 2/3] arm: dts: mt8183: " Hsin-Yi Wang
2021-08-04  4:40 ` [PATCH v4 3/3] dt-bindings: mediatek: convert pinctrl to yaml Hsin-Yi Wang
2021-08-05  9:02 ` [PATCH v4 1/3] arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl Matthias Brugger
2021-08-11  8:48   ` Linus Walleij
2021-08-11  8:53 ` Linus Walleij

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).