From: Paul Barker <paul.barker@sancloud.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
linux-omap@vger.kernel.org
Cc: Paul Barker <paul.barker@sancloud.com>,
Robert Nelson <robertcnelson@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs
Date: Fri, 6 Aug 2021 09:59:06 +0100 [thread overview]
Message-ID: <20210806085907.14615-1-paul.barker@sancloud.com> (raw)
pinctrl settings for the USB hub, barometer & accelerometer need to be
referenced from the relevant nodes to work.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
---
arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi | 2 ++
arch/arm/boot/dts/am335x-sancloud-bbe.dts | 4 ++++
2 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
index 627c18d23f94..55952fe8687c 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
@@ -58,6 +58,8 @@ &cpsw_port1 {
&i2c0 {
usb2512b: usb-hub@2c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_hub_ctrl>;
compatible = "microchip,usb2512b";
reg = <0x2c>;
reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 2a0ac9f5dda7..efbe93135dbe 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -32,6 +32,8 @@ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7) /* gpmc_a10.gpio1_
&i2c0 {
lps331ap: barometer@5c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lps3331ap_pins>;
compatible = "st,lps331ap-press";
st,drdy-int-pin = <1>;
reg = <0x5c>;
@@ -40,6 +42,8 @@ lps331ap: barometer@5c {
};
mpu6050: accelerometer@68 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6050_pins>;
compatible = "invensense,mpu6050";
reg = <0x68>;
interrupt-parent = <&gpio0>;
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-08-06 9:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-06 8:59 Paul Barker [this message]
2021-08-06 8:59 ` [PATCH 2/2] ARM: dts: am335x-sancloud-bbe: Drop usb wifi comment Paul Barker
2021-08-10 6:59 ` [PATCH 1/2] ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210806085907.14615-1-paul.barker@sancloud.com \
--to=paul.barker@sancloud.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=robertcnelson@gmail.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).