From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>, Rob Herring <robh+dt@kernel.org>,
"Matthias Brugger" <matthias.bgg@gmail.com>,
Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
Tomasz Figa <tfiga@chromium.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>,
Hsin-Yi Wang <hsinyi@chromium.org>, <yong.wu@mediatek.com>,
<youlin.pei@mediatek.com>, <anan.sun@mediatek.com>,
<chao.hao@mediatek.com>, <yen-chang.chen@mediatek.com>
Subject: [PATCH v3 21/33] iommu/mediatek: Add infra iommu support
Date: Thu, 23 Sep 2021 19:58:28 +0800 [thread overview]
Message-ID: <20210923115840.17813-22-yong.wu@mediatek.com> (raw)
In-Reply-To: <20210923115840.17813-1-yong.wu@mediatek.com>
The infra iommu enable bits in mt8195 is in the pericfg register segment,
use regmap to update it.
If infra iommu master translation fault, It don't have the larbid/portid,
thus print out the whole register value.
Since regmap_update_bits may fail, add return value for mtk_iommu_config.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 36 +++++++++++++++++++++++++++++-------
drivers/iommu/mtk_iommu.h | 2 ++
2 files changed, 31 insertions(+), 7 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index d103e4f33078..37d6dfb4feab 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -112,6 +112,8 @@
#define MTK_PROTECT_PA_ALIGN 256
+#define PERICFG_IOMMU_1 0x714
+
#define HAS_4GB_MODE BIT(0)
/* HW will use the EMI clock if there isn't the "bclk". */
#define HAS_BCLK BIT(1)
@@ -324,8 +326,8 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
dev_err_ratelimited(
data->dev,
- "fault type=0x%x iova=0x%llx pa=0x%llx larb=%d port=%d layer=%d %s\n",
- int_state, fault_iova, fault_pa, fault_larb, fault_port,
+ "fault type=0x%x iova=0x%llx pa=0x%llx master=0x%x(larb=%d port=%d) layer=%d %s\n",
+ int_state, fault_iova, fault_pa, regval, fault_larb, fault_port,
layer, write ? "write" : "read");
}
@@ -369,14 +371,15 @@ static int mtk_iommu_get_domain_id(struct device *dev,
return -EINVAL;
}
-static void mtk_iommu_config(struct mtk_iommu_data *data, struct device *dev,
- bool enable, unsigned int domid)
+static int mtk_iommu_config(struct mtk_iommu_data *data, struct device *dev,
+ bool enable, unsigned int domid)
{
struct mtk_smi_larb_iommu *larb_mmu;
unsigned int larbid, portid;
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
const struct mtk_iommu_iova_region *region;
- int i;
+ u32 peri_mmuen, peri_mmuen_msk;
+ int i, ret = 0;
for (i = 0; i < fwspec->num_ids; ++i) {
larbid = MTK_M4U_TO_LARB(fwspec->ids[i]);
@@ -396,8 +399,19 @@ static void mtk_iommu_config(struct mtk_iommu_data *data, struct device *dev,
larb_mmu->mmu |= MTK_SMI_MMU_EN(portid);
else
larb_mmu->mmu &= ~MTK_SMI_MMU_EN(portid);
+ } else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA)) {
+ peri_mmuen_msk = BIT(portid);
+ peri_mmuen = enable ? peri_mmuen_msk : 0;
+
+ ret = regmap_update_bits(data->pericfg, PERICFG_IOMMU_1,
+ peri_mmuen_msk, peri_mmuen);
+ if (ret)
+ dev_err(dev, "%s iommu(%s) inframaster 0x%x fail(%d).\n",
+ enable ? "enable" : "disable",
+ dev_name(data->dev), peri_mmuen_msk, ret);
}
}
+ return ret;
}
static int mtk_iommu_domain_finalise(struct mtk_iommu_domain *dom,
@@ -504,8 +518,7 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
pm_runtime_put(m4udev);
}
- mtk_iommu_config(data, dev, true, domid);
- return 0;
+ return mtk_iommu_config(data, dev, true, domid);
}
static void mtk_iommu_detach_device(struct iommu_domain *domain,
@@ -921,6 +934,15 @@ static int mtk_iommu_probe(struct platform_device *pdev)
ret = mtk_iommu_mm_dts_parse(dev, &match, data);
if (ret)
goto out_runtime_disable;
+ } else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) &&
+ data->plat_data->pericfg_comp_str) {
+ infracfg = syscon_regmap_lookup_by_compatible(data->plat_data->pericfg_comp_str);
+ if (IS_ERR(infracfg)) {
+ ret = PTR_ERR(infracfg);
+ goto out_runtime_disable;
+ }
+
+ data->pericfg = infracfg;
}
platform_set_drvdata(pdev, data);
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 5b32277fee99..d83c79bf800a 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -55,6 +55,7 @@ struct mtk_iommu_plat_data {
u32 flags;
u32 inv_sel_reg;
+ char *pericfg_comp_str;
struct list_head *hw_list;
unsigned int iova_region_nr;
const struct mtk_iommu_iova_region *iova_region;
@@ -80,6 +81,7 @@ struct mtk_iommu_data {
struct device *smicomm_dev;
struct dma_iommu_mapping *mapping; /* For mtk_iommu_v1.c */
+ struct regmap *pericfg;
/*
* In the sharing pgtable case, list data->list to the global list like m4ulist.
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-09-23 12:28 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-23 11:58 [PATCH v3 00/33] MT8195 IOMMU SUPPORT Yong Wu
2021-09-23 11:58 ` [PATCH v3 01/33] dt-bindings: mediatek: mt8195: Add binding for MM IOMMU Yong Wu
2021-09-23 11:58 ` [PATCH v3 02/33] dt-bindings: mediatek: mt8195: Add binding for infra IOMMU Yong Wu
2021-09-23 11:58 ` [PATCH v3 03/33] iommu/mediatek: Fix 2 HW sharing pgtable issue Yong Wu
2021-09-23 11:58 ` [PATCH v3 04/33] iommu/mediatek: Remove clk_disable in mtk_iommu_remove Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 05/33] iommu/mediatek: Adapt sharing and non-sharing pgtable case Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 06/33] iommu/mediatek: Add 12G~16G support for multi domains Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 07/33] iommu/mediatek: Add a flag DCM_DISABLE Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 08/33] iommu/mediatek: Add a flag NON_STD_AXI Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 09/33] iommu/mediatek: Remove for_each_m4u in tlb_sync_all Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2022-01-09 2:48 ` Yong Wu
2022-01-10 9:16 ` AngeloGioacchino Del Regno
2022-01-10 10:59 ` Yong Wu
2022-01-10 11:40 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 10/33] iommu/mediatek: Add tlb_lock in tlb_flush_all Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 11/33] iommu/mediatek: Remove the granule in the tlb flush Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 12/33] iommu/mediatek: Always tlb_flush_all when each PM resume Yong Wu
2021-11-09 12:21 ` Dafna Hirschfeld
2021-11-10 2:20 ` Yong Wu
2021-11-10 5:29 ` Dafna Hirschfeld
2021-11-10 7:50 ` Yong Wu
2021-11-22 7:05 ` Yong Wu
2021-11-22 11:08 ` Dafna Hirschfeld
2021-11-27 10:11 ` Dafna Hirschfeld
2021-11-30 7:39 ` Yong Wu
2021-11-30 11:33 ` Dafna Hirschfeld
2021-12-06 8:28 ` Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 13/33] iommu/mediatek: Remove the power status checking in tlb flush all Yong Wu
2021-10-22 14:03 ` Dafna Hirschfeld
2021-10-25 4:03 ` Yong Wu
2021-11-04 3:28 ` Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2022-01-09 2:47 ` Yong Wu
2021-09-23 11:58 ` [PATCH v3 14/33] iommu/mediatek: Always enable output PA over 32bits in isr Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 15/33] iommu/mediatek: Add SUB_COMMON_3BITS flag Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 16/33] iommu/mediatek: Add IOMMU_TYPE flag Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 17/33] iommu/mediatek: Contain MM IOMMU flow with the MM TYPE Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 18/33] iommu/mediatek: Adjust device link when it is sub-common Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 19/33] iommu/mediatek: Add list_del in mtk_iommu_remove Yong Wu
2022-01-04 15:55 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 20/33] iommu/mediatek: Allow IOMMU_DOMAIN_UNMANAGED for PCIe VFIO Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` Yong Wu [this message]
2022-01-04 15:54 ` [PATCH v3 21/33] iommu/mediatek: Add infra iommu support AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 22/33] iommu/mediatek: Add PCIe support Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2022-01-09 2:47 ` Yong Wu
2021-09-23 11:58 ` [PATCH v3 23/33] iommu/mediatek: Add mt8195 support Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 24/33] iommu/mediatek: Only adjust code about register base Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 25/33] iommu/mediatek: Just move code position in hw_init Yong Wu
2022-01-04 15:53 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 26/33] iommu/mediatek: Add mtk_iommu_bank_data structure Yong Wu
2022-01-04 15:53 ` AngeloGioacchino Del Regno
2022-01-09 2:46 ` Yong Wu
2021-09-23 11:58 ` [PATCH v3 27/33] iommu/mediatek: Initialise bank HW for each a bank Yong Wu
2022-01-04 15:54 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 28/33] iommu/mediatek: Add bank_nr and bank_enable Yong Wu
2022-01-04 15:53 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 29/33] iommu/mediatek: Change the domid to iova_region_id Yong Wu
2022-01-04 15:53 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 30/33] iommu/mediatek: Get the proper bankid for multi banks Yong Wu
2021-09-23 11:58 ` [PATCH v3 31/33] iommu/mediatek: Initialise/Remove for multi bank dev Yong Wu
2021-09-23 11:58 ` [PATCH v3 32/33] iommu/mediatek: Backup/restore regsiters for multi banks Yong Wu
2022-01-04 15:53 ` AngeloGioacchino Del Regno
2021-09-23 11:58 ` [PATCH v3 33/33] iommu/mediatek: mt8195: Enable multi banks for infra iommu Yong Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210923115840.17813-22-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=anan.sun@mediatek.com \
--cc=chao.hao@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=hsinyi@chromium.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=krzysztof.kozlowski@canonical.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
--cc=will@kernel.org \
--cc=yen-chang.chen@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).