[BUG] drivers/perf: hisi: kernel fails to boot since commit ac4511c9364c "drivers/perf: hisi: Add identifier sysfs file"

[Wang Cheng <wanngchenng@gmail.com>]

Hi respected kernel committers,

After upgrading from v5.10 to 5.17.0-rc1, my kernel fails to boot. By
bisectionally compiling and installing kernel a few times, the boot
problem first appears when upgrading from v5.10 to v5.11-rc1. Here are
boot messages of v5.11-rc1:
[2.126166] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[2.127807] zbud: loaded
[2.128010] integrity: Platform Keyring initialized
[2.128014] Key type asymmetric registered
[2.128017] Asymmetric key parser 'x509' registered
[2.128026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[2.128092] io scheduler mq-deadline registered
[2.130976] pcieport 0000:00:01.0: can't derive routing for PCI INT A
[2.130982] pcieport 0000:00:01.0: PCI INT A: no GSI
[2.131272] pcieport 0000:00:01.0: can't derive routing for PCI INT A
[2.131276] pcieport 0000:00:01.0: PCI INT A: no GSI
[2.132188] ACPI: IORT: [Firmware Bug]: [map (____ptrval____)] conflicting mapping for input ID 0x7c00
[2.132192] ACPI: IORT: [Firmware Bug]: applying workaround.
[2.132259] ACPI: IORT: [Firmware Bug]: [map (____ptrval____)] conflicting mapping for input ID 0x7c00
[2.132263] ACPI: IORT: [Firmware Bug]: applying workaround.
[2.132285] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[2.132850] efifb: probing for efifb
[2.132875] efifb: framebuffer at 0x80000000000, using 3072k, total 3072k
[2.132878] efifb: mode is 1024x768x32, linelength=4096, pages=1
[2.132881] efifb: scrolling: redraw
[2.132883] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[2.135097] Console: switching to colour frame buffer device 128x48
[2.137221] fb0: EFI VGA frame buffer device
[2.137655] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[2.137715] ACPI: Power Button [PWRB]
[2.138153] ACPI GTDT: found 1 SBSA generic Watchdog(s).
[2.140587] Serial: 8250/16550 deiver, 4 ports, IRQ sharing enabled
[2.141685] Serial: AMBA driver
[2.141828] msm_serial: driver initialized
[2.142785] mousedev: PS/2 mouse device common for all mice
[2.186108] rtc-efi rtc-efi.0: registered as rtc0
[2.198458] rtc-efi rtc-efi.0: setting system clock to 2022-01-23T13:49:49 UTC(1642945789)
[2.199157] ledtrig-cpu: registered to indicate activity on CPUs
_
Boot messages stop here. After about 2 seconds, the cpu fan runs in the
fastest mode all the time. I have to press the power button to turn the
machine off.

By bisectionally test, I found commit ac4511c9364c9a6390e8585cdd4596103bca16eb
"drivers/perf: hisi: Add identifier sysfs file" is suspect of resulting
the boot problem. If I revert this commit on v5.11-rc1, kernel boots
fine. That is:
$ git checkout v5.11-rc1
$ git revert ac4511c9364c9a6390e8585cdd4596103bca16eb
$ "compile and install kernel"
kernel boots fine.

I tested a bit more. I think hisi_uncore_ddrc_pmu.c or function
hisi_uncore_pmu_identifier_attr_show(...) is suspect in commit ac4511c9364c.
Commit ac4511c9364c modified 5 files:
	drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c
	drivers/perf/hisilicon/hisi_uncore_hha_pmu.c
	drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c
	drivers/perf/hisilicon/hisi_uncore_pmu.c
	drivers/perf/hisilicon/hisi_uncore_pmu.h
As I understand, a new function hisi_uncore_pmu_identifier_attr_show(...)
is declared and defined in hisi_uncore_pmu.h and hisi_uncore_pmu.c, the
new function is called in hisi_uncore_ddrc_pmu.c, hisi_uncore_hha_pmu.c
and hisi_uncore_l3c_pmu.c. I tested that, if I restore the change in
hisi_uncore_ddrc_pmu.c, kernel boots fine; if I restore the change in
hisi_uncore_hha_pmu.c and hisi_uncore_l3c_pmu.c, kernel fails to boot.
That is:
	drivers/perf/hisilicon/hisi_uncore_hha_pmu.c
	drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c
	drivers/perf/hisilicon/hisi_uncore_pmu.c
	drivers/perf/hisilicon/hisi_uncore_pmu.h
compile and install, kernel boots fine.

	drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c
	drivers/perf/hisilicon/hisi_uncore_pmu.c
	drivers/perf/hisilicon/hisi_uncore_pmu.h
compile and install, kernel fails to boot.

$ sudo lshw
cpu version: HUAWEI Kunpeng 920 2251K
cores=8 enabledcores=8 threads=8
8Gib RAM
$ uname -a
Linux armdebian 5.10.0-9-arm64 #1 SMP Debian 5.10.70-1 (2021-09-30)
aarch64 GNU/Linux

Do I understand right? What else I could do to solve this?

Regards,

--
Cheng

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel