From: Sascha Hauer <s.hauer@pengutronix.de>
To: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
kernel@pengutronix.de, "Andy Yan" <andy.yan@rock-chips.com>,
"Benjamin Gaignard" <benjamin.gaignard@collabora.com>,
"Michael Riesch" <michael.riesch@wolfvision.net>,
"Sandy Huang" <hjc@rock-chips.com>,
"Heiko Stübner" <heiko@sntech.de>,
"Peter Geis" <pgwipeout@gmail.com>,
"Sascha Hauer" <s.hauer@pengutronix.de>
Subject: [PATCH 22/27] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi
Date: Wed, 26 Jan 2022 15:55:44 +0100 [thread overview]
Message-ID: <20220126145549.617165-23-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20220126145549.617165-1-s.hauer@pengutronix.de>
This enabled the VOP2 display controller along with hdmi and the
required port routes which is enough to get a picture out of the
hdmi port of the board.
Changes since v3:
- Fix HDMI connector type
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
.../boot/dts/rockchip/rk3568-evb1-v10.dts | 48 +++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416a..9a669240e49a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
#include "rk3568.dtsi"
/ {
@@ -33,6 +34,17 @@ dc_12v: dc-12v {
regulator-max-microvolt = <12000000>;
};
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
@@ -106,6 +118,12 @@ &gmac1m1_rgmii_clk
status = "okay";
};
+&hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
@@ -390,3 +408,33 @@ &sdmmc0 {
&uart2 {
status = "okay";
};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&hdmi_in {
+ hdmi_in_vp0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vp0_out_hdmi>;
+ };
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&vp0 {
+ vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
+ reg = <RK3568_VOP2_EP_HDMI>;
+ remote-endpoint = <&hdmi_in_vp0>;
+ };
+};
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-26 15:11 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-26 14:55 [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support Sascha Hauer
2022-01-26 14:55 ` [PATCH 01/27] drm/encoder: Add of_graph port to struct drm_encoder Sascha Hauer
2022-01-26 15:04 ` Aw: " Frank Wunderlich
2022-01-26 14:55 ` [PATCH 02/27] drm/rockchip: dw_hdmi: Do not leave clock enabled in error case Sascha Hauer
2022-01-26 14:55 ` [PATCH 03/27] drm/rockchip: dw_hdmi: rename vpll clock to reference clock Sascha Hauer
2022-01-26 14:55 ` [PATCH 04/27] drm/rockchip: dw_hdmi: add rk3568 support Sascha Hauer
2022-01-26 14:55 ` [PATCH 05/27] drm/rockchip: dw_hdmi: add regulator support Sascha Hauer
2022-01-26 14:55 ` [PATCH 06/27] drm/rockchip: dw_hdmi: Add support for hclk Sascha Hauer
2022-01-26 14:55 ` [PATCH 07/27] drm/rockchip: dw_hdmi: Use auto-generated tables Sascha Hauer
2022-01-26 15:54 ` Doug Anderson
2022-01-27 11:20 ` Sascha Hauer
2022-01-26 14:55 ` [PATCH 08/27] drm/rockchip: dw_hdmi: drop mode_valid hook Sascha Hauer
2022-01-26 14:55 ` [PATCH 09/27] drm/rockchip: dw_hdmi: Set cur_ctr to 0 always Sascha Hauer
2022-01-26 15:42 ` Doug Anderson
2022-01-27 11:06 ` Sascha Hauer
2022-01-26 14:55 ` [PATCH 10/27] drm/rockchip: dw_hdmi: add default 594Mhz clk for 4K@60hz Sascha Hauer
2022-01-26 14:55 ` [PATCH 11/27] clk: rockchip: rk3568: Add more PLL rates Sascha Hauer
2022-01-26 14:55 ` [PATCH 12/27] dt-bindings: display: rockchip: dw-hdmi: Add compatible for rk3568 HDMI Sascha Hauer
2022-01-26 14:55 ` [PATCH 13/27] dt-bindings: display: rockchip: dw-hdmi: Make unwedge pinctrl optional Sascha Hauer
2022-02-09 3:29 ` Rob Herring
2022-01-26 14:55 ` [PATCH 14/27] dt-bindings: display: rockchip: dw-hdmi: use "ref" as clock name Sascha Hauer
2022-02-09 3:30 ` Rob Herring
2022-01-26 14:55 ` [PATCH 15/27] dt-bindings: display: rockchip: dw-hdmi: Add regulator support Sascha Hauer
2022-02-09 3:30 ` Rob Herring
2022-01-26 14:55 ` [PATCH 16/27] dt-bindings: display: rockchip: dw-hdmi: Add additional clock Sascha Hauer
2022-02-09 3:31 ` Rob Herring
2022-01-26 14:55 ` [PATCH 17/27] dt-bindings: display: rockchip: Add binding for VOP2 Sascha Hauer
2022-01-26 22:10 ` Rob Herring
2022-02-01 17:22 ` Rob Herring
2022-01-26 14:55 ` [PATCH 18/27] arm64: dts: rockchip: rk3399: reorder hmdi clocks Sascha Hauer
2022-01-26 14:55 ` [PATCH 19/27] arm64: dts: rockchip: rk3399: rename HDMI ref clock to 'ref' Sascha Hauer
2022-01-26 14:55 ` [PATCH 20/27] arm64: dts: rockchip: rk356x: Add VOP2 nodes Sascha Hauer
2022-02-09 3:32 ` Rob Herring
2022-01-26 14:55 ` [PATCH 21/27] arm64: dts: rockchip: rk356x: Add HDMI nodes Sascha Hauer
2022-01-26 16:04 ` Peter Geis
2022-01-26 17:56 ` Robin Murphy
2022-01-26 18:44 ` Peter Geis
2022-01-26 19:24 ` Robin Murphy
2022-01-26 20:00 ` Peter Geis
2022-01-26 14:55 ` Sascha Hauer [this message]
2022-01-26 14:55 ` [PATCH 23/27] arm64: dts: rockchip: enable vop2 and hdmi tx on quartz64a Sascha Hauer
2022-01-26 14:55 ` [PATCH 24/27] clk: rk3568: drop CLK_SET_RATE_PARENT from dclk_vop* Sascha Hauer
2022-01-29 17:48 ` Heiko Stübner
2022-01-31 8:10 ` Sascha Hauer
2022-02-08 11:41 ` Heiko Stübner
2022-01-26 14:55 ` [PATCH 25/27] clk: rk3568: Add CLK_SET_RATE_PARENT to the HDMI reference clock Sascha Hauer
2022-01-26 14:55 ` [PATCH 26/27] drm/rockchip: Make VOP driver optional Sascha Hauer
[not found] ` <20220126145549.617165-28-s.hauer@pengutronix.de>
2022-01-26 17:10 ` Aw: [PATCH 27/27] drm: rockchip: Add VOP2 driver Frank Wunderlich
2022-01-27 9:17 ` Piotr Oniszczuk
2022-01-27 11:00 ` Sascha Hauer
2022-01-27 14:43 ` Piotr Oniszczuk
2022-01-27 14:16 ` [PATCH v4 00/27] drm/rockchip: RK356x VOP2 support Michael Riesch
2022-02-08 11:57 ` (subset) " Heiko Stuebner
2022-02-08 13:21 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220126145549.617165-23-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=andy.yan@rock-chips.com \
--cc=benjamin.gaignard@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michael.riesch@wolfvision.net \
--cc=pgwipeout@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).