From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
jan.kiszka@siemens.com
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Subject: [PATCH v2 2/2] arm64: dts: ti: k3-am65*: remove #address-cells/#size-cells from flash nodes
Date: Thu, 3 Feb 2022 15:02:40 +0100 [thread overview]
Message-ID: <20220203140240.973690-2-matthias.schiffer@ew.tq-group.com> (raw)
In-Reply-To: <20220203140240.973690-1-matthias.schiffer@ew.tq-group.com>
Specifying partitions directly in the flash node is deprecated, a
fixed-partitions node should be used instead. Therefore, it doesn't make
sense to have these properties in the flash nodes.
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
---
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 ++------
2 files changed, 2 insertions(+), 8 deletions(-)
v2: no changes, added Jan's Acked-by
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 873c123c611ed..7eca697e1ca14 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -623,8 +623,6 @@ flash@0 {
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 821ee7f2eff04..9c06da9d6d8f7 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -340,14 +340,12 @@ &main_spi0 {
ti,pindir-d0-out-d1-in;
status = "okay";
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
spi-max-frequency = <48000000>;
- #address-cells = <1>;
- #size-cells= <1>;
};
};
@@ -442,7 +440,7 @@ &ospi0 {
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
status = "okay";
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
@@ -453,8 +451,6 @@ flash@0{
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
};
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-02-03 14:04 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-03 14:02 [PATCH v2 1/2] arm64: dts: ti: k3-am65: disable optional peripherals by default Matthias Schiffer
2022-02-03 14:02 ` Matthias Schiffer [this message]
2022-02-04 14:31 ` Nishanth Menon
2022-02-07 6:54 ` Tony Lindgren
2022-02-07 8:45 ` Matthias Schiffer
2022-02-07 11:25 ` Tony Lindgren
2022-02-08 10:53 ` Matthias Schiffer
2022-02-08 11:52 ` Tony Lindgren
2022-02-28 10:30 ` Matthias Schiffer
2022-03-09 9:11 ` Tony Lindgren
2022-03-09 11:10 ` Matthias Schiffer
2022-03-09 14:03 ` Tony Lindgren
2022-02-16 16:40 ` (subset) " Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220203140240.973690-2-matthias.schiffer@ew.tq-group.com \
--to=matthias.schiffer@ew.tq-group.com \
--cc=devicetree@vger.kernel.org \
--cc=jan.kiszka@siemens.com \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).