From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id B221CC433EF for ; Thu, 17 Mar 2022 14:57:47 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=c5WTnefbJsDzu7PZ/q2cQFFGJwp5XPqHIDghTzXZ7cU=; b=1HDnMCHxz6d0zM RdZMl6I7WKIiqQS4vWeLBAZZsXRgXUjy70OGe0xFCrC5hhZxz+6gBuCHW/xOiriADr747ZFzVy3f/ v33wC/ACG+lSDv0gsccxeQZg4pm0G368yHjCk7kfEi4UkN0G/aildoPFPRb+1TA2TfvBqkUrUc/uM T7g0KExZTa16bs9No2aqAKqCKiuJvmYNdNLuPn/fkbpafaUd4FvxZ3MUC/PIDfZCe6bLLI/QmhGhx 7AbtQQgVhzMEBB6Wh/cDCrpSiHd68sHihKkDgkNDgHttF9I2pBcq/kHcwZAi+5yntT4WqBF88yrix zjXFoMPEOEjWgoRLe6BQ==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1nUrYM-00GXm6-Ac; Thu, 17 Mar 2022 14:56:38 +0000 Received: from mailgw01.mediatek.com ([216.200.240.184]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1nUrY7-00GXfq-NU; Thu, 17 Mar 2022 14:56:29 +0000 X-UUID: e067895ed02a4b0dbd507feba0ba1616-20220317 X-UUID: e067895ed02a4b0dbd507feba0ba1616-20220317 Received: from mtkcas67.mediatek.inc [(172.29.193.45)] by mailgw01.mediatek.com (envelope-from ) (musrelay.mediatek.com ESMTP with TLSv1.2 ECDHE-RSA-AES256-SHA384 256/256) with ESMTP id 1938460366; Thu, 17 Mar 2022 07:56:17 -0700 Received: from mtkexhb01.mediatek.inc (172.21.101.102) by MTKMBS62N2.mediatek.inc (172.29.193.42) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Thu, 17 Mar 2022 07:56:15 -0700 Received: from mtkcas11.mediatek.inc (172.21.101.40) by mtkexhb01.mediatek.inc (172.21.101.102) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Thu, 17 Mar 2022 22:56:07 +0800 Received: from mtksdccf07.mediatek.inc (172.21.84.99) by mtkcas11.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Thu, 17 Mar 2022 22:56:07 +0800 From: Moudy Ho To: Mauro Carvalho Chehab , Rob Herring , Matthias Brugger , Hans Verkuil , Jernej Skrabec CC: Chun-Kuang Hu , Geert Uytterhoeven , Rob Landley , Laurent Pinchart , , , , , , Alexandre Courbot , , , , , AngeloGioacchino Del Regno , Maoguang Meng , daoyuan huang , Ping-Hsun Wu , , , , , , , , , , Subject: [PATCH v12 1/3] dt-binding: mt8183: add Mediatek MDP3 dt-bindings Date: Thu, 17 Mar 2022 22:56:03 +0800 Message-ID: <20220317145605.25782-2-moudy.ho@mediatek.com> X-Mailer: git-send-email 2.18.0 In-Reply-To: <20220317145605.25782-1-moudy.ho@mediatek.com> References: <20220317145605.25782-1-moudy.ho@mediatek.com> MIME-Version: 1.0 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220317_075623_891224_2220A092 X-CRM114-Status: GOOD ( 20.77 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org This patch adds DT binding documents for Media Data Path 3 (MDP3) a unit in multimedia system combined with several components and used for scaling and color format convert. It can create multiple paths with different functions by assigning different components, a simple diagram is as follows: +------------+ +------------+ | RDMA | | ISP[*1] | +---+--+--+--+ +-----+--+---+ A B C 2 1 v v v v v | | | | | | | +---------+ | | | | | | | | +-------+ | | | | | | | | | +-------+----+---------+ | | | | | | | | | +---------+ | v v | | | A 2 | | | ******** | | | ** ** | | | * PQ[*2] * | | | ** ** | | | ******** | | | | | | | | v v | v v A 2 | C 1 +---+--+---+ | +-----+--+--+ | RSZ | | | RSZ | +---+------+ | +-----+--+--+ D | 3 4 v | v v | | | | | +-------+ | | | | | | | | +-------------------+ | | | | | v v v v D B 3 4 +---+--+--+--+ +---------+--+ | WROT | | WDMA | +------------+ +------------+ [*1] Direct-link path for camera input [*2] A series of picture quality adjustment engines, composed of AAL, CCORR, TDSHP and COLOR Signed-off-by: Moudy Ho --- .../bindings/media/mediatek,mdp3-rdma.yaml | 214 ++++++++++++++++++ .../bindings/media/mediatek,mdp3-rsz.yaml | 54 +++++ .../bindings/media/mediatek,mdp3-wrot.yaml | 57 +++++ .../bindings/soc/mediatek/mediatek,ccorr.yaml | 47 ++++ .../bindings/soc/mediatek/mediatek,wdma.yaml | 58 +++++ 5 files changed, 430 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml new file mode 100644 index 000000000000..3bf59c3f521f --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml @@ -0,0 +1,214 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Read Direct Memory Access + +maintainers: + - Matthias Brugger + +description: | + Mediatek Read Direct Memory Access(RDMA) component used to do read DMA. + It contains one line buffer to store the sufficient pixel data, and + must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + The 1st RDMA is also used to be a controller node in Media Data Path 3(MDP3) + that containing MMSYS, MUTEX, GCE and SCP settings. + +properties: + compatible: + oneOf: + - items: + # MDP3 controller node + - const: mediatek,mt8183-mdp3 + - const: mediatek,mt8183-mdp3-rdma + - items: + # normal RDMA conponent + - const: mediatek,mt8183-mdp3-rdma + + mediatek,scp: + description: | + The node of system control processor (SCP), using + the remoteproc & rpmsg framework. + $ref: '/schemas/types.yaml#/definitions/phandle' + maxItems: 1 + + mediatek,mdp3-comps: + description: | + MDP subsystem which has direct-link from Image Signal Processor(ISP). + When using the camera, the DMA of ISP PASS (DIP) module will directly + trigger MDP3 without other control (such as V4L2 M2M) to create + corresponding HW path. + The MDP3 controller must set up a series of registers at the beginning of + path creation which covering MMSYS, IMGSYS, and MDP3's components, + so that data flow can pass through MDP3. + The entire path is briefly described as follows + ISP --+ + | + +-> DIP --+ + ................|.............................................. + (MDP3) +->IMGI -+-> DL1 -> RSZ -+-> PATH1 -> WROT + | ^ | + | | | + +-> DL2 -----+ +-> PATH2 -> WDMA + | + +---------------------------> EXTO + $ref: '/schemas/types.yaml#/definitions/string-array' + items: + enum: + # MDP direct-link input path selection, create a + # component for path connectedness of HW pipe control + - mediatek,mt8183-mdp3-dl1 + - mediatek,mt8183-mdp3-dl2 + # MDP direct-link output path selection, create a + # component for path connectedness of HW pipe control + - mediatek,mt8183-mdp3-path1 + - mediatek,mt8183-mdp3-path2 + # Input DMA of ISP PASS2 (DIP) module for raw image input + - mediatek,mt8183-mdp3-imgi + # Output DMA of ISP PASS2 (DIP) module for YUV image output + - mediatek,mt8183-mdp3-exto + + reg: + items: + - description: basic RDMA HW address + - description: MDP direct-link 1st and 2nd input + - description: MDP direct-link 1st output + - description: MDP direct-link 2nd output + - description: ISP input and output + + mediatek,gce-client-reg: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + items: + - description: GCE client for RDMA + - description: GCE client for dl1 and dl2 + - description: GCE client for path1 + - description: GCE client for path2 + - description: GCE client for imgi and exto + description: | + The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/-gce.h. + + power-domains: + maxItems: 1 + + clocks: + items: + - description: RDMA clock + - description: RSZ clock + - description: direck-link TX clock in MDP side + - description: direck-link RX clock in MDP side + - description: direck-link TX clock in ISP side + - description: direck-link RX clock in ISP side + + iommus: + maxItems: 1 + + mediatek,mmsys: + description: The node of mux(multiplexer) controller for HW connections. + $ref: '/schemas/types.yaml#/definitions/phandle' + + mediatek,mm-mutex: + description: | + Mediatek mutex, namely MUTEX, is used to send the triggers signals called + Start Of Frame(SOF) / End Of Frame(EOF) to each sub-modules on the data path. + In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects + the shadow register. + $ref: '/schemas/types.yaml#/definitions/phandle' + + mediatek,mailbox-gce: + description: | + The node of global command engine (GCE), used to read/write + registers with critical time limitation. + $ref: '/schemas/types.yaml#/definitions/phandle' + + mboxes: + items: + - description: used for 1st data pipe from RDMA + - description: used for 2nd data pipe from RDMA + - description: used for 3rd data pipe from Direct-Link + - description: used for 4th data pipe from Direct-Link + + gce-subsys: + description: | + sub-system id corresponding to the global command engine (GCE) + register address. + $ref: '/schemas/types.yaml#/definitions/phandle-array' + +if: + properties: + compatible: + contains: + const: mediatek,mt8183-mdp3 + +then: + required: + - mediatek,scp + - mediatek,mmsys + - mediatek,mm-mutex + - mediatek,mailbox-gce + - mboxes + - gce-subsys + +required: + - compatible + - reg + - clocks + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + + mdp3_rdma0: mdp3_rdma0@14001000 { + compatible = "mediatek,mt8183-mdp3", + "mediatek,mt8183-mdp3-rdma"; + mediatek,scp = <&scp>; + mediatek,mdp3-comps = "mediatek,mt8183-mdp3-dl1", + "mediatek,mt8183-mdp3-dl2", + "mediatek,mt8183-mdp3-path1", + "mediatek,mt8183-mdp3-path2", + "mediatek,mt8183-mdp3-imgi", + "mediatek,mt8183-mdp3-exto"; + reg = <0x14001000 0x1000>, + <0x14000000 0x1000>, + <0x14005000 0x1000>, + <0x14006000 0x1000>, + <0x15020000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>, + <&gce SUBSYS_1400XXXX 0 0x1000>, + <&gce SUBSYS_1400XXXX 0x5000 0x1000>, + <&gce SUBSYS_1400XXXX 0x6000 0x1000>, + <&gce SUBSYS_1502XXXX 0 0x1000>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MDP_RSZ1>, + <&mmsys CLK_MM_MDP_DL_TXCK>, + <&mmsys CLK_MM_MDP_DL_RX>, + <&mmsys CLK_MM_IPU_DL_TXCK>, + <&mmsys CLK_MM_IPU_DL_RX>; + iommus = <&iommu>; + mediatek,mmsys = <&mmsys>; + mediatek,mm-mutex = <&mutex>; + mediatek,mailbox-gce = <&gce>; + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>, + <&gce 21 CMDQ_THR_PRIO_LOWEST>, + <&gce 22 CMDQ_THR_PRIO_LOWEST>, + <&gce 23 CMDQ_THR_PRIO_LOWEST>; + gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>, + <&gce 0x14010000 SUBSYS_1401XXXX>, + <&gce 0x14020000 SUBSYS_1402XXXX>, + <&gce 0x15020000 SUBSYS_1502XXXX>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml new file mode 100644 index 000000000000..0dcb1a883a8e --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-rsz.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Resizer + +maintainers: + - Matthias Brugger + +description: | + One of Media Data Path 3 (MDP3) components used to do frame resizing. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-rsz + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + + clocks: + minItems: 1 + +additionalProperties: false + +examples: + - | + #include + #include + + mdp3_rsz0: mdp3_rsz0@14003000 { + compatible = "mediatek,mt8183-mdp3-rsz"; + reg = <0x14003000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + }; + + mdp3_rsz1: mdp3_rsz1@14004000 { + compatible = "mediatek,mt8183-mdp3-rsz"; + reg = <0x14004000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml new file mode 100644 index 000000000000..f2c38a9b187d --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-wrot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Write DMA with Rotation + +maintainers: + - Matthias Brugger + +description: | + One of Media Data Path 3 (MDP3) components used to write DMA with frame rotation. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-wrot + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + minItems: 1 + + iommus: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + + mdp3_wrot0: mdp3_wrot0@14005000 { + compatible = "mediatek,mt8183-mdp3-wrot"; + reg = <0x14005000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + iommus = <&iommu>; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml new file mode 100644 index 000000000000..cf23f4f5bd69 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek color correction + +maintainers: + - Matthias Brugger + +description: | + Mediatek color correction with 3X3 matrix. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-ccorr + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + + clocks: + minItems: 1 + +additionalProperties: false + +examples: + - | + #include + #include + + mdp3_ccorr: mdp3_ccorr@1401c000 { + compatible = "mediatek,mt8183-mdp3-ccorr"; + reg = <0x1401c000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>; + clocks = <&mmsys CLK_MM_MDP_CCORR>; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml new file mode 100644 index 000000000000..4057b5232e45 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Write Direct Memory Access + +maintainers: + - Matthias Brugger + +description: | + Mediatek Write Direct Memory Access(WDMA) component used to write + the data into DMA. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-wdma + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: The register of client driver can be configured by gce with + 4 arguments defined in this property, such as phandle of gce, subsys id, + register offset and size. Each GCE subsys id is mapping to a client + defined in the header include/dt-bindings/gce/-gce.h. + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + minItems: 1 + + iommus: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + + mdp3_wdma: mdp3_wdma@14006000 { + compatible = "mediatek,mt8183-mdp3-wdma"; + reg = <0x14006000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WDMA0>; + iommus = <&iommu>; + }; -- 2.18.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel