linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Corentin Labbe <clabbe@baylibre.com>
To: alexandre.torgue@foss.st.com, andrew@lunn.ch, broonie@kernel.org,
	calvin.johnson@oss.nxp.com, davem@davemloft.net,
	edumazet@google.com, hkallweit1@gmail.com,
	jernej.skrabec@gmail.com, joabreu@synopsys.com,
	krzysztof.kozlowski+dt@linaro.org, kuba@kernel.org,
	lgirdwood@gmail.com, linux@armlinux.org.uk, pabeni@redhat.com,
	peppe.cavallaro@st.com, robh+dt@kernel.org, samuel@sholland.org,
	wens@csie.org
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev,
	Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH 4/6] ARM: dts: sunxi: move phy regulator in PHY node
Date: Mon,  9 May 2022 07:48:55 +0000	[thread overview]
Message-ID: <20220509074857.195302-5-clabbe@baylibre.com> (raw)
In-Reply-To: <20220509074857.195302-1-clabbe@baylibre.com>

Now that PHY core can handle regulators, move regulator handle in PHY
node.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts      | 2 +-
 arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts  | 2 +-
 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts     | 2 +-
 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts          | 2 +-
 arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts      | 2 +-
 arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts    | 2 +-
 arch/arm/boot/dts/sun8i-h3-zeropi.dts             | 2 +-
 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 2 +-
 arch/arm/boot/dts/sun8i-r40-oka40i-c.dts          | 2 +-
 arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 2 +-
 arch/arm/boot/dts/sun9i-a80-cubieboard4.dts       | 2 +-
 arch/arm/boot/dts/sun9i-a80-optimus.dts           | 2 +-
 arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi     | 2 +-
 13 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 5a7e1bd5f825..b450be0a45ed 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -129,7 +129,6 @@ &ehci0 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_sw>;
 	phy-handle = <&rgmii_phy>;
 	phy-mode = "rgmii-id";
 	allwinner,rx-delay-ps = <700>;
@@ -151,6 +150,7 @@ &mdio {
 	rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		phy-supply = <&reg_sw>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index 870993393fc2..fe70b350cdbb 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -181,7 +181,6 @@ &ehci1 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_dldo4>;
 	phy-handle = <&rgmii_phy>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -201,6 +200,7 @@ &mdio {
 	rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		phy-supply = <&reg_dldo4>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index a2f2ef2b0092..c393612f44c6 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -103,7 +103,6 @@ &ehci2 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
 	phy-mode = "rgmii";
 
@@ -114,6 +113,7 @@ &external_mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <7>;
+		phy-supply = <&reg_gmac_3v3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
index 26e2e6172e0d..70bde396856b 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
@@ -80,7 +80,6 @@ &ehci2 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -90,6 +89,7 @@ &external_mdio {
 	ext_rgmii_phy: ethernet-phy@7 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <7>;
+		phy-supply = <&reg_gmac_3v3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
index d05fa679dcd3..c6dcf1af3298 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -83,7 +83,6 @@ &ehci3 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
 	phy-mode = "rgmii-id";
 
@@ -94,6 +93,7 @@ &external_mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
+		phy-supply = <&reg_gmac_3v3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
index b6ca45d18e51..61eb8c003186 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
@@ -65,7 +65,6 @@ reg_gmac_3v3: gmac-3v3 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -75,5 +74,6 @@ &external_mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		phy-supply = <&reg_gmac_3v3>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
index 7d3e7323b661..54174ef18823 100644
--- a/arch/arm/boot/dts/sun8i-h3-zeropi.dts
+++ b/arch/arm/boot/dts/sun8i-h3-zeropi.dts
@@ -65,13 +65,13 @@ &external_mdio {
 	ext_rgmii_phy: ethernet-phy@7 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <7>;
+		phy-supply = <&reg_gmac_3v3>;
 	};
 };
 
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
 	phy-mode = "rgmii-id";
 
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index a6a1087a0c9b..b1f269bbd479 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -130,7 +130,6 @@ &gmac {
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	phy-supply = <&reg_dc1sw>;
 	status = "okay";
 };
 
@@ -138,6 +137,7 @@ &gmac_mdio {
 	phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		phy-supply = <&reg_dc1sw>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
index 0bd1336206b8..c43476b426df 100644
--- a/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
+++ b/arch/arm/boot/dts/sun8i-r40-oka40i-c.dts
@@ -93,7 +93,6 @@ &gmac {
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	phy-supply = <&reg_dcdc1>;
 	status = "okay";
 };
 
@@ -101,6 +100,7 @@ &gmac_mdio {
 	phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		phy-supply = <&reg_dcdc1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 47954551f573..050a649d7bda 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -121,7 +121,6 @@ &gmac {
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	phy-supply = <&reg_dc1sw>;
 	status = "okay";
 };
 
@@ -129,6 +128,7 @@ &gmac_mdio {
 	phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		phy-supply = <&reg_dc1sw>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index c8ca8cb7f5c9..ab9bf4bf7343 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -130,7 +130,6 @@ &gmac {
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	phy-supply = <&reg_cldo1>;
 	status = "okay";
 };
 
@@ -142,6 +141,7 @@ &i2c3 {
 
 &mdio {
 	phy1: ethernet-phy@1 {
+		phy-supply = <&reg_cldo1>;
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 5c3580d712e4..48219b8049b1 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -125,13 +125,13 @@ &gmac {
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	phy-supply = <&reg_cldo1>;
 	status = "okay";
 };
 
 &mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
+		phy-supply = <&reg_cldo1>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
index d03f5853ef7b..65f0a3c2af3f 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
@@ -125,7 +125,6 @@ &ehci2 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
 	phy-mode = "rgmii-id";
 
@@ -136,6 +135,7 @@ &external_mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		phy-supply = <&reg_gmac_3v3>;
 	};
 };
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-05-09  7:51 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-09  7:48 [PATCH 0/6] arm64: add ethernet to orange pi 3 Corentin Labbe
2022-05-09  7:48 ` [PATCH 1/6] phy: handle optional regulator for PHY Corentin Labbe
2022-05-09  7:48 ` [PATCH 2/6] net: stmmac: dwmac-sun8i: remove regulator Corentin Labbe
2022-05-09 14:09   ` Andre Przywara
2022-05-09 14:38     ` LABBE Corentin
2022-05-09  7:48 ` [PATCH 3/6] dt-bindings: net: Add documentation for phy-supply Corentin Labbe
2022-05-09 12:17   ` Andrew Lunn
2022-05-09 13:26     ` LABBE Corentin
2022-05-09 16:02       ` Andrew Lunn
2022-05-09 16:12         ` Mark Brown
2022-05-09 16:38           ` Andrew Lunn
2022-05-09 16:56             ` Mark Brown
2022-05-11  8:02               ` LABBE Corentin
2022-05-11 12:50                 ` Mark Brown
2022-05-17  0:47             ` Rob Herring
2022-05-09  7:48 ` Corentin Labbe [this message]
2022-05-09 10:55   ` [PATCH 4/6] ARM: dts: sunxi: move phy regulator in PHY node Andre Przywara
2022-05-09 11:16     ` LABBE Corentin
2022-05-09  7:48 ` [PATCH 5/6] arm64: dts: allwinner: " Corentin Labbe
2022-05-09  7:48 ` [PATCH 6/6] arm64: dts: allwinner: orange-pi-3: Enable ethernet Corentin Labbe
2022-05-09 12:20 ` [PATCH 0/6] arm64: add ethernet to orange pi 3 Andrew Lunn
2022-05-09 13:27   ` LABBE Corentin
2022-05-09 15:19     ` Andrew Lunn
2022-05-09 15:24       ` LABBE Corentin
2022-05-09 15:56         ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220509074857.195302-5-clabbe@baylibre.com \
    --to=clabbe@baylibre.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew@lunn.ch \
    --cc=broonie@kernel.org \
    --cc=calvin.johnson@oss.nxp.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=robh+dt@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).