linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Mathias Nyman <mathias.nyman@intel.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	"Ikjoon Jang" <ikjn@chromium.org>, <linux-usb@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] usb: xhci-mtk: relax TT periodic bandwidth allocation
Date: Tue, 2 Aug 2022 15:59:45 +0800	[thread overview]
Message-ID: <20220802075946.18168-1-chunfeng.yun@mediatek.com> (raw)

Currently uses the worst case byte budgets on full-speed bus bandwidth,
for example, for an isochronos IN endpoint with 192 bytes budget, it
will consume the whole 5 u-frames(188 * 5) while the actual full-speed
bus budget should be just 192 bytes.

This patch changes the low/full-speed bandwidth allocation logic to use
"approximate" best case budget for lower speed bandwidth management.
For the same endpoint from the above example, the approximate best case
budget is now reduced to (188 * 2) bytes.

Without this patch, many usb audio headsets with 3 interfaces (audio
input, audio output, and HID) cannot be configured on xhci-mtk.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/host/xhci-mtk-sch.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index 06a6b19acaae..a17bc584ee99 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -425,7 +425,6 @@ static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset)
 
 static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset)
 {
-	u32 extra_cs_count;
 	u32 start_ss, last_ss;
 	u32 start_cs, last_cs;
 
@@ -461,18 +460,12 @@ static int check_sch_tt(struct mu3h_sch_ep_info *sch_ep, u32 offset)
 		if (last_cs > 7)
 			return -ESCH_CS_OVERFLOW;
 
-		if (sch_ep->ep_type == ISOC_IN_EP)
-			extra_cs_count = (last_cs == 7) ? 1 : 2;
-		else /*  ep_type : INTR IN / INTR OUT */
-			extra_cs_count = 1;
-
-		cs_count += extra_cs_count;
 		if (cs_count > 7)
 			cs_count = 7; /* HW limit */
 
 		sch_ep->cs_count = cs_count;
-		/* one for ss, the other for idle */
-		sch_ep->num_budget_microframes = cs_count + 2;
+		/* ss, idle are ignored */
+		sch_ep->num_budget_microframes = cs_count;
 
 		/*
 		 * if interval=1, maxp >752, num_budge_micoframe is larger
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2022-08-02  8:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-02  7:59 Chunfeng Yun [this message]
2022-08-02  7:59 ` [PATCH 2/2] usb: xhci-mtk: fix bandwidth release issue Chunfeng Yun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220802075946.18168-1-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=ikjn@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=matthias.bgg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).