From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id AD2C8ECAAD5 for ; Tue, 6 Sep 2022 14:47:50 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:CC:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=8i/FHhAQkeeyMIf56RgVVls0/QgxtVecsqaBwJp8EbY=; b=VYXiI4NA2VAYUA l5QaIx9gtGcxObojSEIbKK2aboT0IVpSZLtLZYqYUdbokztp1NtkjzGoL5nF9tdbNIH3yidc6gm5H +BbrPzlvOk9dJJ7jQiIidwGX6EMZDmA7isIb+OTslD+CG2FppLpan33upmUdXXOn965xaxmWLy810 /cIl4Bg/NPYb1SBpQcIS7L7MflBXDqakhDHWOoW+Fig3aozgv+nrD+IyjiPlDJJg3qIxq80YatPua rD/8jXbRrH9Lg9Jvv+7zklPqWmeic2tQcYjAYUfU2q0ymiA/yLjvJPMaxgcyw1PbjD1aPzqGkS3A7 clgjgeom+6vCESwhqHvA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1oVZq7-00EQi9-OE; Tue, 06 Sep 2022 14:46:12 +0000 Received: from esa.microchip.iphmx.com ([68.232.154.123]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1oVZ4X-00E4Ab-JY for linux-arm-kernel@lists.infradead.org; Tue, 06 Sep 2022 13:57:04 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1662472621; x=1694008621; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=XAvOSIGCUjk54fk6WfpKKPO6o/ZWDeEaqk/cP6f7qdM=; b=o9Lk1l7+3eF4Lml9rClC2B7BaOPuCc2gqNhmvlVGHc+7solPfeyvWjVz j3w7J0bpczgsT9nxaw8c4pAO81HSS/LZn0lUhiXq7xXxP8OW4AmgJx8qL jYXahYwGl83qsmfK18NZro61mFvmdb0iE9qQKqyAch733JhxagezyLDAb EZhPXdJLsjpxOJyXKWfkusdqsu3sjXnofJCriXlGiU6j4ACGnQ4AFnSuh rm0IfsuiayXMQlr7yHhQZlc4OB8OPa4R9U1UOwNOBQDVW/SxX5mXAZT/Y Dy1sL+YjyfQrNAiFJvj0VBRiKbhtx2oEemyEQx9gY7u1/JdpYCikByOHI g==; X-IronPort-AV: E=Sophos;i="5.93,294,1654585200"; d="scan'208";a="172589973" Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa4.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 06 Sep 2022 06:57:00 -0700 Received: from chn-vm-ex04.mchp-main.com (10.10.85.152) by chn-vm-ex01.mchp-main.com (10.10.85.143) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.12; Tue, 6 Sep 2022 06:57:00 -0700 Received: from ROB-ULT-M68701.microchip.com (10.10.115.15) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server id 15.1.2507.12 via Frontend Transport; Tue, 6 Sep 2022 06:56:55 -0700 From: Sergiu Moga To: , , , , , , , , , , , , , , , , CC: , , , , , Subject: [PATCH v2 05/13] dt-bindings: serial: atmel,at91-usart: convert to json-schema Date: Tue, 6 Sep 2022 16:55:04 +0300 Message-ID: <20220906135511.144725-6-sergiu.moga@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220906135511.144725-1-sergiu.moga@microchip.com> References: <20220906135511.144725-1-sergiu.moga@microchip.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20220906_065701_772564_EF738CF3 X-CRM114-Status: GOOD ( 19.44 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Convert at91 USART DT Binding for Atmel/Microchip SoCs to json-schema format. Furthermore, move this binding to the serial directory, since binding directories match hardware, unlike the driver subsystems which match Linux convention. Signed-off-by: Sergiu Moga --- v1 -> v2: - only do what the commit says, split the addition of other compatibles and properties in other patches - remove unnecessary "|"'s - mention header in `atmel,usart-mode`'s description - place `if:` under `allOf:` - respect order of spi0's DT properties: compatible, then reg then the reset of properties .../devicetree/bindings/mfd/atmel-usart.txt | 98 ---------- .../bindings/serial/atmel,at91-usart.yaml | 183 ++++++++++++++++++ 2 files changed, 183 insertions(+), 98 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-usart.txt create mode 100644 Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt deleted file mode 100644 index a09133066aff..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ /dev/null @@ -1,98 +0,0 @@ -* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) - -Required properties for USART: -- compatible: Should be one of the following: - - "atmel,at91rm9200-usart" - - "atmel,at91sam9260-usart" - - "microchip,sam9x60-usart" - - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" - - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" - - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt -- clock-names: tuple listing input clock names. - Required elements: "usart" -- clocks: phandles to input clocks. - -Required properties for USART in SPI mode: -- #size-cells : Must be <0> -- #address-cells : Must be <1> -- cs-gpios: chipselects (internal cs not supported) -- atmel,usart-mode : Must be (found in dt-bindings/mfd/at91-usart.h) - -Optional properties in serial and SPI mode: -- dma bindings for dma transfer: - - dmas: DMA specifier, consisting of a phandle to DMA controller node, - memory peripheral interface and USART DMA channel ID, FIFO configuration. - The order of DMA channels is fixed. The first DMA channel must be TX - associated channel and the second one must be RX associated channel. - Refer to dma.txt and atmel-dma.txt for details. - - dma-names: "tx" for TX channel. - "rx" for RX channel. - The order of dma-names is also fixed. The first name must be "tx" - and the second one must be "rx" as in the examples below. - -Optional properties in serial mode: -- atmel,use-dma-rx: use of PDC or DMA for receiving data -- atmel,use-dma-tx: use of PDC or DMA for transmitting data -- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively. - It will use specified PIO instead of the peripheral function pin for the USART feature. - If unsure, don't specify this property. -- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO - capable USARTs. -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt - - compatible description: -- at91rm9200: legacy USART support -- at91sam9260: generic USART implementation for SAM9 SoCs - -Example: -- use PDC: - usart0: serial@fff8c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfff8c000 0x4000>; - interrupts = <7>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>; - cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>; - dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>; - dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>; - dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>; - rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>; - }; - -- use DMA: - usart0: serial@f001c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - dmas = <&dma0 2 0x3>, - <&dma0 2 0x204>; - dma-names = "tx", "rx"; - atmel,fifo-size = <32>; - }; - -- SPI mode: - #include - - spi0: spi@f001c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart"; - atmel,usart-mode = ; - reg = <0xf001c000 0x100>; - interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, - <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; - dma-names = "tx", "rx"; - cs-gpios = <&pioB 3 0>; - }; diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml new file mode 100644 index 000000000000..b25535b7a4d2 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/atmel,at91-usart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) + +maintainers: + - Richard Genoud + +properties: + compatible: + oneOf: + - enum: + - atmel,at91rm9200-usart + - atmel,at91sam9260-usart + - microchip,sam9x60-usart + - items: + - const: atmel,at91rm9200-dbgu + - const: atmel,at91rm9200-usart + - items: + - const: atmel,at91sam9260-dbgu + - const: atmel,at91sam9260-usart + - items: + - const: microchip,sam9x60-dbgu + - const: microchip,sam9x60-usart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: usart + + clocks: + maxItems: 1 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + atmel,usart-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must be either for SPI or + for USART (found in dt-bindings/mfd/at91-usart.h). + enum: [ 0, 1 ] + +required: + - compatible + - reg + - interrupts + - clock-names + - clocks + +allOf: + - if: + properties: + $nodename: + pattern: "^serial@[0-9a-f]+$" + then: + allOf: + - $ref: /schemas/serial/serial.yaml# + - $ref: /schemas/serial/rs485.yaml# + + properties: + atmel,use-dma-rx: + type: boolean + description: use of PDC or DMA for receiving data + + atmel,use-dma-tx: + type: boolean + description: use of PDC or DMA for transmitting data + + atmel,fifo-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum number of data the RX and TX FIFOs can store for FIFO + capable USARTS. + enum: [ 16, 32 ] + + else: + if: + properties: + $nodename: + pattern: "^spi@[0-9a-f]+$" + then: + allOf: + - $ref: /schemas/spi/spi-controller.yaml# + + properties: + atmel,usart-mode: + const: 1 + + "#size-cells": + const: 0 + + "#address-cells": + const: 1 + + required: + - atmel,usart-mode + - "#size-cells" + - "#address-cells" + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + + /* use PDC */ + usart0: serial@fff8c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfff8c000 0x4000>; + interrupts = <7>; + clocks = <&usart0_clk>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>; + cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>; + dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>; + dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>; + dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>; + rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>; + }; + + - | + #include + #include + #include + #include + + /* use DMA */ + usart1: serial@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&usart0_clk>; + clock-names = "usart"; + atmel,use-dma-rx; + atmel,use-dma-tx; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + atmel,fifo-size = <32>; + }; + + - | + #include + #include + #include + #include + + /* SPI mode */ + spi0: spi@f001c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf001c000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + atmel,usart-mode = ; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&usart0_clk>; + clock-names = "usart"; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; + dma-names = "tx", "rx"; + cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>; + }; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel