[PATCH v9 0/3] Add support for lan966x flexcom chip-select configuration

From: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
To: <lee@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org, alexandre.belloni@bootlin.com,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	sergiu.moga@microchip.com, UNGLinuxDriver@microchip.com,
	claudiu.beznea@microchip.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 0/3] Add support for lan966x flexcom chip-select configuration
Date: Fri, 16 Sep 2022 05:57:41 -0200	[thread overview]
Message-ID: <20220916075744.1879428-1-kavyasree.kotagiri@microchip.com> (raw)

This patch series converts atmel-flexcom bindings into json-schema format.
Adds support for lan966x flexcom chip-select configurations and its
DT bindings.

v8 -> v9:
 - Use full schema path for i2c bindings.

v7 -> v8:
 - Added back patternProperties for child nodes.
 - Changed compatible string to microchip,lan9668-flexcom.

v6 -> v7:
 - Change filename to atmel,sama5d2-flexcom.yaml
 - Add #address-cells, #size-cells to flexcom node - Fixed warnings.

v5 -> v6:
 - Removed spi node from example as suggested by Rob and
   also pattern properties(spi dt-bindings conversion to yaml patch is under review).
   https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220629125804.137099-1-sergiu.moga@microchip.com/
   Once this is accepted, I will add back spi example through new patch.

v4 -> v5:
 - Fix indentations of DT example.
 - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then
   "reg" property as it is not required.

v3 -> v4:
 - Fix dtschema errors.
 - Add a condition to flexcom chip-selects configuration as chip-select
   lines are optional.

v2 -> v3:
 - changed IRQ flag in dt-bindings example.
 - added reg property specific to lan66x which is missed in v2.
 - used goto label for clk_disable in error cases.

v1 -> v2:
 - minor fix in title of dt-bindings.
 - Modified new dt properties usage in atmel,flexcom.yaml.
 - Used GENMASK and macros for maximum allowed values.
 - Use u32 values for flexcom chipselects instead of strings.
 - disable clock in case of errors.

Kavyasree Kotagiri (3):
  dt-bindings: mfd: Convert atmel-flexcom to json-schema
  dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for
    lan966x
  mfd: atmel-flexcom: Add support for lan966x flexcom chip-select
    configuration

 .../bindings/mfd/atmel,sama5d2-flexcom.yaml   | 155 ++++++++++++++++++
 .../devicetree/bindings/mfd/atmel-flexcom.txt |  63 -------
 drivers/mfd/atmel-flexcom.c                   |  94 ++++++++++-
 3 files changed, 248 insertions(+), 64 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt

-- 
2.25.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel