From: Marcel Ziswiler <marcel@ziswiler.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Fabio Estevam <festevam@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 2/4] arm: dts: colibri-imx6: move vbus-supply to module level device tree
Date: Tue, 20 Sep 2022 11:22:25 +0200 [thread overview]
Message-ID: <20220920092227.286306-3-marcel@ziswiler.com> (raw)
In-Reply-To: <20220920092227.286306-1-marcel@ziswiler.com>
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Move USB VBUS supply from single carrier board to module level device
tree. This pin is as per Colibri module family standard.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/boot/dts/imx6dl-colibri-aster.dts | 1 -
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 1 -
arch/arm/boot/dts/imx6dl-colibri-iris.dts | 1 -
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 9 +++++++--
4 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
index 74e8a6cd8bed..a28e083f29d5 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-aster.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
@@ -99,7 +99,6 @@ &uart3 {
};
&usbh1 {
- vbus-supply = <®_usb_host_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 7272edd85a49..a02981d4a3fc 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -111,7 +111,6 @@ &uart3 {
};
&usbh1 {
- vbus-supply = <®_usb_host_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
index cf77d894f6d7..c5797ff35b71 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-iris.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
@@ -138,7 +138,6 @@ &uart3 {
};
&usbh1 {
- vbus-supply = <®_usb_host_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 3e98b5da0cc6..21c5049bda4e 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -112,7 +112,7 @@ reg_module_3v3_audio: regulator-module-3v3-audio {
reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* SODIMM 129 / USBH_PEN */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
regulator-max-microvolt = <5000000>;
@@ -677,6 +677,11 @@ &uart3 {
status = "disabled";
};
+/* Colibri USBH */
+&usbh1 {
+ vbus-supply = <®_usb_host_vbus>;
+};
+
/* Colibri USBC */
&usbotg {
disable-over-current;
@@ -995,7 +1000,7 @@ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
fsl,pins = <
- /* USBH_EN */
+ /* SODIMM 129 / USBH_PEN */
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f058
>;
};
--
2.36.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-09-20 9:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-20 9:22 [PATCH v1 0/4] arm: dts: colibri-imx6: usb dual-role switching et. al Marcel Ziswiler
2022-09-20 9:22 ` [PATCH v1 1/4] arm: dts: colibri-imx6: usb dual-role switching Marcel Ziswiler
2022-09-20 9:22 ` Marcel Ziswiler [this message]
2022-09-20 9:22 ` [PATCH v1 3/4] arm: dts: colibri-imx6: specify usbh_pen gpio being active-low Marcel Ziswiler
2022-09-20 9:22 ` [PATCH v1 4/4] arm: dts: imx7-colibri: remove spurious debounce property Marcel Ziswiler
2022-09-21 12:15 ` Francesco Dolcini
2022-09-21 12:23 ` Greg Kroah-Hartman
2022-09-21 12:28 ` Francesco Dolcini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220920092227.286306-3-marcel@ziswiler.com \
--to=marcel@ziswiler.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).