From: Pawel Dembicki <paweldembicki@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Gregory Clement <gregory.clement@bootlin.com>,
Andrew Lunn <andrew@lunn.ch>
Cc: Pawel Dembicki <paweldembicki@gmail.com>
Subject: [PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board
Date: Mon, 3 Oct 2022 09:34:43 +0200 [thread overview]
Message-ID: <20221003073443.1511266-1-paweldembicki@gmail.com> (raw)
Add Endian 4i Edge 200 is 5-port firewall.
It have also clone: Endian UTM Mini (The same hardware, with added WLAN
card).
Hardware:
- SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
- Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
- NAND Flash: 512MB (Micron 29F4G08AAC)
- Lan 1-4: 4x GBE (Marvell 88E6171R-TFJ2)
- Lan 5: 1x GBE (Marvell 88E1116R-NNC1)
- Storage: MicroSD Slot
- MCPIE: MiniPCIe Slot present [fitted with SparkLan WPEA-110N/E
(Atheros AR9280 chipset) in Endian UTM Mini WLAN only]
- USB: 1x USB 2.0 port
- Console: RJ-45 port
- LEDs: 3x GPIO controlled
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
Changes in v2:
- added MIT licence option
- removed "cpu" switch port label.
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-4i-edge-200.dts | 205 +++++++++++++++++++++
2 files changed, 206 insertions(+)
create mode 100644 arch/arm/boot/dts/kirkwood-4i-edge-200.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index eae7d1139fbc..81a24fe623a8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -299,6 +299,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
keystone-k2g-evm.dtb \
keystone-k2g-ice.dtb
dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-4i-edge-200.dtb \
kirkwood-b3.dtb \
kirkwood-blackarmor-nas220.dtb \
kirkwood-c200-v1.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-4i-edge-200.dts b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
new file mode 100644
index 000000000000..b1749d3f60b7
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-4i-edge-200.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Endian 4i Edge 200 Board Description
+ * Note: Endian UTM Mini is hardware clone of Endian Edge 200
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Endian 4i Edge 200";
+ compatible = "endian,4i-edge-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = &uart0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led>;
+ pinctrl-names = "default";
+
+ led-1 {
+ function = LED_FUNCTION_SD;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+
+ led-2 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+};
+
+ð0port {
+ speed = <1000>;
+ duplex = <1>;
+};
+
+ð1 {
+ status = "okay";
+};
+
+ð1port {
+ phy-handle = <ðphyb>;
+};
+
+&mdio {
+ status = "okay";
+
+ ethphyb: ethernet-phy@b {
+ reg = <0x0b>;
+
+ marvell,reg-init =
+ /* link-activity, bi-color mode 4 */
+ <3 0x10 0xfff0 0xf>; /* Reg 3,16 <- 0xzzzf */
+ };
+
+ switch0: switch@11 {
+ compatible = "marvell,mv88e6085";
+ reg = <0x11>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "port1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "port2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "port3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "port4";
+ };
+
+ port@5 {
+ reg = <5>;
+ phy-mode = "rgmii-id";
+ ethernet = <ð0port>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x000a0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "u-boot-env";
+ reg = <0x000a0000 0x00060000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "kernel";
+ reg = <0x00100000 0x00400000>;
+ };
+
+ partition@500000 {
+ label = "ubi";
+ reg = <0x00500000 0x1fb00000>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_sysrst>;
+ pinctrl-names = "default";
+
+ pmx_sysrst: pmx-sysrst {
+ marvell,pins = "mpp6";
+ marvell,function = "sysrst";
+ };
+
+ pmx_sdio_cd: pmx-sdio-cd {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led: pmx-led {
+ marvell,pins = "mpp34", "mpp35", "mpp49";
+ marvell,function = "gpio";
+ };
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata_phy0 {
+ status = "disabled";
+};
+
+&sata_phy1 {
+ status = "disabled";
+};
+
+&sdio {
+ pinctrl-0 = <&pmx_sdio_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ cd-gpios = <&gpio0 28 9>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
--
2.34.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-10-03 7:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-03 7:34 Pawel Dembicki [this message]
2022-11-29 22:27 ` [PATCH v2] ARM: dts: kirkwood: Add Endian 4i Edge 200 board Paweł Dembicki
2022-11-30 0:18 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221003073443.1511266-1-paweldembicki@gmail.com \
--to=paweldembicki@gmail.com \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).