linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Michael Walle <michael@walle.cc>
To: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Michael Walle <michael@walle.cc>
Subject: [PATCH] Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD"
Date: Tue,  7 Feb 2023 14:10:20 +0100	[thread overview]
Message-ID: <20230207131020.2458027-1-michael@walle.cc> (raw)

With commit b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses
from VPD"), the network adapter now depends on the nvmem device to be
present, which isn't the case and thus breaks networking on this board.
Revert it.

Fixes: b203e6f1e833 ("arm64: dts: ls1028a: sl28: get MAC addresses from VPD")
Signed-off-by: Michael Walle <michael@walle.cc>
---
Shawn, unfortunately, the driver was NAKed, so this will break our
KernelCI setup. Alternatively, the original commit can just be dropped
from your tree, if that's how you do things like this. I've learned that
the correct way is to get the driver in and then in the next release enable
the driver and add it to the dts. Next time :)
---
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts       | 12 ------------
 .../freescale/fsl-ls1028a-kontron-sl28-var1.dts |  2 --
 .../freescale/fsl-ls1028a-kontron-sl28-var2.dts |  8 --------
 .../freescale/fsl-ls1028a-kontron-sl28-var4.dts |  2 --
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts  | 17 -----------------
 5 files changed, 41 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
index af9194eca556..73eb6061c73e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
@@ -56,14 +56,10 @@ qsgmii_phy3: ethernet-phy@10 {
 };
 
 &enetc_port2 {
-	nvmem-cells = <&base_mac_address 2>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &enetc_port3 {
-	nvmem-cells = <&base_mac_address 3>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -84,8 +80,6 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy0>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 4>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -94,8 +88,6 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy1>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 5>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -104,8 +96,6 @@ &mscc_felix_port2 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy2>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 6>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -114,8 +104,6 @@ &mscc_felix_port3 {
 	managed = "in-band-status";
 	phy-handle = <&qsgmii_phy3>;
 	phy-mode = "qsgmii";
-	nvmem-cells = <&base_mac_address 7>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 1f34c7553459..7cd29ab970d9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -55,7 +55,5 @@ &enetc_port0 {
 &enetc_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
index aac41192caa1..113b1df74bf8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
@@ -36,14 +36,10 @@ &enetc_port0 {
 };
 
 &enetc_port2 {
-	nvmem-cells = <&base_mac_address 2>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
 &enetc_port3 {
-	nvmem-cells = <&base_mac_address 3>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -56,8 +52,6 @@ &mscc_felix_port0 {
 	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -66,8 +60,6 @@ &mscc_felix_port1 {
 	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
-	nvmem-cells = <&base_mac_address 1>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index a4421db3784e..9b5e92fb753e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -43,7 +43,5 @@ vddh: vddh-regulator {
 &enetc_port1 {
 	phy-handle = <&phy1>;
 	phy-mode = "rgmii-id";
-	nvmem-cells = <&base_mac_address 1>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 8b65af4a7147..4ab17b984b03 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -92,8 +92,6 @@ &enetc_port0 {
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	managed = "in-band-status";
-	nvmem-cells = <&base_mac_address 0>;
-	nvmem-cell-names = "mac-address";
 	status = "okay";
 };
 
@@ -156,21 +154,6 @@ partition@3e0000 {
 				label = "bootloader environment";
 			};
 		};
-
-		otp-1 {
-			compatible = "user-otp";
-
-			nvmem-layout {
-				compatible = "kontron,sl28-vpd";
-
-				serial_number: serial-number {
-				};
-
-				base_mac_address: base-mac-address {
-					#nvmem-cell-cells = <1>;
-				};
-			};
-		};
 	};
 };
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-02-07 13:13 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-07 13:10 Michael Walle [this message]
2023-03-06  3:10 ` [PATCH] Revert "arm64: dts: ls1028a: sl28: get MAC addresses from VPD" Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230207131020.2458027-1-michael@walle.cc \
    --to=michael@walle.cc \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).