linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Gregory Clement <gregory.clement@bootlin.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Pavel Machek <pavel@ucw.cz>, Lee Jones <lee@kernel.org>,
	Christian Marangi <ansuelsmth@gmail.com>,
	John Crispin <john@phrozen.org>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-leds@vger.kernel.org
Cc: Jonathan McDowell <noodles@earth.li>
Subject: [net-next PATCH v5 13/15] arm: qcom: dt: Add Switch LED for each port for rb3011
Date: Sun, 19 Mar 2023 20:18:12 +0100	[thread overview]
Message-ID: <20230319191814.22067-14-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20230319191814.22067-1-ansuelsmth@gmail.com>

Add Switch LED for each port for MikroTik RB3011UiAS-RM.

MikroTik RB3011UiAS-RM is a 10 port device with 2 qca8337 switch chips
connected.

It was discovered that in the hardware design all 3 Switch LED trace of
the related port is connected to the same LED. This was discovered by
setting to 'always on' the related led in the switch regs and noticing
that all 3 LED for the specific port (for example for port 1) cause the
connected LED for port 1 to turn on. As an extra test we tried enabling
2 different LED for the port resulting in the LED turned off only if
every led in the reg was off.

Aside from this funny and strange hardware implementation, the device
itself have one green LED for each port, resulting in 10 green LED one
for each of the 10 supported port.

Cc: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 120 ++++++++++++++++++++++
 1 file changed, 120 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 47a5d1849c72..472b5a2912a1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -65,26 +65,86 @@ fixed-link {
 				port@1 {
 					reg = <1>;
 					label = "sw1";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <1>;
+						};
+					};
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "sw2";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <2>;
+						};
+					};
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "sw3";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <3>;
+						};
+					};
 				};
 
 				port@4 {
 					reg = <4>;
 					label = "sw4";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <4>;
+						};
+					};
 				};
 
 				port@5 {
 					reg = <5>;
 					label = "sw5";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <5>;
+						};
+					};
 				};
 			};
 		};
@@ -130,26 +190,86 @@ fixed-link {
 				port@1 {
 					reg = <1>;
 					label = "sw6";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <6>;
+						};
+					};
 				};
 
 				port@2 {
 					reg = <2>;
 					label = "sw7";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <7>;
+						};
+					};
 				};
 
 				port@3 {
 					reg = <3>;
 					label = "sw8";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <8>;
+						};
+					};
 				};
 
 				port@4 {
 					reg = <4>;
 					label = "sw9";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <9>;
+						};
+					};
 				};
 
 				port@5 {
 					reg = <5>;
 					label = "sw10";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						led@0 {
+							reg = <0>;
+							color = <LED_COLOR_ID_GREEN>;
+							function = LED_FUNCTION_LAN;
+							function-enumerator = <10>;
+						};
+					};
 				};
 			};
 		};
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-03-19 19:20 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-19 19:17 [net-next PATCH v5 00/15] net: Add basic LED support for switch/phy Christian Marangi
2023-03-19 19:18 ` [net-next PATCH v5 01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header Christian Marangi
2023-03-20 16:32   ` Michal Kubiak
2023-03-19 19:18 ` [net-next PATCH v5 02/15] net: dsa: qca8k: add LEDs basic support Christian Marangi
2023-03-20 16:30   ` Michal Kubiak
2023-03-20 16:33     ` Christian Marangi
2023-03-20 17:48       ` Michal Kubiak
2023-03-20 18:05         ` Christian Marangi
2023-03-19 19:18 ` [net-next PATCH v5 03/15] net: dsa: qca8k: add LEDs blink_set() support Christian Marangi
2023-03-23 11:55   ` Pavel Machek
2023-03-19 19:18 ` [net-next PATCH v5 04/15] leds: Provide stubs for when CLASS_LED is disabled Christian Marangi
2023-03-19 22:49   ` Andrew Lunn
2023-03-20 17:52     ` Christian Marangi
2023-03-20 19:31       ` Andrew Lunn
2023-03-21  7:55         ` Christian Marangi
2023-03-21 15:58           ` Andrew Lunn
2023-03-21 16:02           ` Andrew Lunn
2023-03-21 16:13             ` Christian Marangi
2023-03-19 19:18 ` [net-next PATCH v5 05/15] net: phy: Add a binding for PHY LEDs Christian Marangi
2023-03-20 16:34   ` Michal Kubiak
2023-03-19 19:18 ` [net-next PATCH v5 06/15] net: phy: phy_device: Call into the PHY driver to set LED brightness Christian Marangi
2023-03-20 16:36   ` Michal Kubiak
2023-03-19 19:18 ` [net-next PATCH v5 07/15] net: phy: marvell: Add software control of the LEDs Christian Marangi
2023-03-23 11:55   ` Pavel Machek
2023-03-19 19:18 ` [net-next PATCH v5 08/15] net: phy: phy_device: Call into the PHY driver to set LED blinking Christian Marangi
2023-03-23 11:56   ` Pavel Machek
2023-03-19 19:18 ` [net-next PATCH v5 09/15] net: phy: marvell: Implement led_blink_set() Christian Marangi
2023-03-23 11:57   ` Pavel Machek
2023-03-19 19:18 ` [net-next PATCH v5 10/15] dt-bindings: net: ethernet-controller: Document support for LEDs node Christian Marangi
2023-03-21 21:19   ` Rob Herring
2023-03-21 22:54     ` Christian Marangi
2023-03-21 23:23       ` Andrew Lunn
2023-03-21 23:39         ` Christian Marangi
2023-03-24 21:59           ` Rob Herring
2023-03-24 22:06       ` Rob Herring
2023-03-19 19:18 ` [net-next PATCH v5 11/15] dt-bindings: net: dsa: qca8k: add LEDs definition example Christian Marangi
2023-03-21 21:27   ` Rob Herring
2023-03-19 19:18 ` [net-next PATCH v5 12/15] arm: qcom: dt: Drop unevaluated properties in switch nodes for rb3011 Christian Marangi
2023-03-24  8:54   ` Krzysztof Kozlowski
2023-03-19 19:18 ` Christian Marangi [this message]
2023-03-23 12:00   ` [net-next PATCH v5 13/15] arm: qcom: dt: Add Switch LED for each port " Pavel Machek
2023-03-19 19:18 ` [net-next PATCH v5 14/15] dt-bindings: net: phy: Document support for LEDs node Christian Marangi
2023-03-21 21:29   ` Rob Herring
2023-03-19 19:18 ` [net-next PATCH v5 15/15] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port Christian Marangi
2023-03-23 12:04   ` Pavel Machek
2023-03-23 17:02     ` Andrew Lunn
2023-03-23 19:11       ` Pavel Machek
2023-03-23 19:53         ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230319191814.22067-14-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregory.clement@bootlin.com \
    --cc=hkallweit1@gmail.com \
    --cc=john@phrozen.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=noodles@earth.li \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).