From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: linux-stm32@st-md-mailman.stormreply.com
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 10/10] ARM: dts: stm32: add STM32MP1-based Phytec board
Date: Mon, 20 Mar 2023 14:27:55 +0100 [thread overview]
Message-ID: <20230320132755.2150384-11-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <20230320132755.2150384-1-s.trumtrar@pengutronix.de>
Add the Phytec STM32MP1-3 Dev board. The devboard uses a Phytec
stm32m157c-som.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
arch/arm/boot/dts/Makefile | 3 +-
.../dts/stm32mp157c-phycore-stm32mp1-3.dts | 66 +++++++++++++++++++
2 files changed, 68 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index efe4152e5846d..dfa9a7477c825 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1252,7 +1252,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32mp157c-ev1.dtb \
stm32mp157c-ev1-scmi.dtb \
stm32mp157c-lxa-mc1.dtb \
- stm32mp157c-odyssey.dtb
+ stm32mp157c-odyssey.dtb \
+ stm32mp157c-phycore-stm32mp1-3.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
new file mode 100644
index 0000000000000..6f4e5f326bdd3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-phycore-stm32mp1-3.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Phytec GmbH 2019-2020 - All Rights Reserved
+ * Author: Dom VOVARD <dom.vovard@linrt.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp157c-phycore-stm32mp15-som.dtsi"
+
+/ {
+ model = "PHYTEC phyCORE-STM32MP1-3 Dev Board";
+ compatible = "phytec,phycore-stm32mp1-3",
+ "phytec,phycore-stm32mp157c-som", "st,stm32mp157";
+
+ aliases {
+ mmc0 = &sdmmc1;
+ mmc1 = &sdmmc2;
+ mmc2 = &sdmmc3;
+ serial0 = &uart4;
+ serial1 = &usart3;
+ serial2 = &usart1;
+ };
+};
+
+&cryp1 {
+ status = "okay";
+};
+
+&dts {
+ status = "okay";
+};
+
+&fmc {
+ status = "disabled";
+};
+
+&gpu {
+ status = "okay";
+ contiguous-area = <&gpu_reserved>;
+};
+
+&i2c4_eeprom {
+ status = "okay";
+};
+
+&i2c4_rtc {
+ status = "okay";
+};
+
+&qspi {
+ status = "okay";
+};
+
+&sdmmc1 {
+ secure-status = "disabled";
+};
+
+&sdmmc2 {
+ status = "okay";
+ secure-status = "disabled";
+};
--
2.39.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2023-03-20 13:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-20 13:27 [PATCH v5 00/10] ARM: stm32: add support for Phycore STM32MP1 Steffen Trumtrar
2023-03-20 13:27 ` [PATCH v5 01/10] ARM: dts: stm32: Add alternate pinmux for ethernet Steffen Trumtrar
2023-03-20 13:27 ` [PATCH v5 02/10] ARM: dts: stm32: Add alternate pinmux for sai2b Steffen Trumtrar
2023-03-20 13:27 ` [PATCH v5 03/10] ARM: dts: stm32: Add new pinmux for sdmmc1_b4 Steffen Trumtrar
2023-03-20 13:27 ` [PATCH v5 04/10] ARM: dts: stm32: Add new pinmux for sdmmc2_d47 Steffen Trumtrar
2023-03-20 13:27 ` [PATCH v5 05/10] ARM: dts: stm32: Add pinmux for USART1 pins Steffen Trumtrar
2023-03-20 13:27 ` [PATCH v5 06/10] ARM: dts: stm32: Add idle/sleep pinmux for USART3 Steffen Trumtrar
2023-03-20 13:27 ` [PATCH v5 07/10] ARM: dts: stm32: Add sleep pinmux for SPI1 pins_a Steffen Trumtrar
2023-03-20 13:27 ` [PATCH v5 08/10] dt-bindings: arm: stm32: Add Phytec STM32MP1 board Steffen Trumtrar
2023-03-20 16:45 ` Krzysztof Kozlowski
2023-03-20 13:27 ` [PATCH v5 09/10] ARM: dts: stm32: add STM32MP1-based Phytec SoM Steffen Trumtrar
2023-03-20 17:37 ` Alexandre TORGUE
2023-03-21 7:14 ` Steffen Trumtrar
2023-03-28 7:51 ` Alexandre TORGUE
2023-03-20 13:27 ` Steffen Trumtrar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230320132755.2150384-11-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=alexandre.torgue@foss.st.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).