Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
WARNING: multiple messages have this Message-ID
From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	akpm@linux-foundation.org
Cc: linux-arch@vger.kernel.org, preid@electromag.com.au,
	yamada.masahiro@socionext.com, linux-pm@vger.kernel.org,
	linux@rasmusvillemoes.dk, linux-kernel@vger.kernel.org,
	morten.tiljeset@prevas.dk, sean.nyekjaer@prevas.dk,
	linux-gpio@vger.kernel.org, lukas@wunner.de,
	geert@linux-m68k.org,
	William Breathitt Gray <vilhelm.gray@gmail.com>,
	andriy.shevchenko@linux.intel.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v17 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
Date: Wed,  9 Oct 2019 11:27:07 -0400
Message-ID: <271a7735b02b6a8b1f54c018e38ea932d1fd299e.1570633189.git.vilhelm.gray@gmail.com> (raw)
In-Reply-To: <cover.1570633189.git.vilhelm.gray@gmail.com>

Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity. An
improvement in this case is that banks that are not masked will now be
skipped.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/gpio/gpio-uniphier.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 93cdcc41e9fb..3e4b15d0231e 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -15,9 +15,6 @@
 #include <linux/spinlock.h>
 #include <dt-bindings/gpio/uniphier-gpio.h>
 
-#define UNIPHIER_GPIO_BANK_MASK		\
-				GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
-
 #define UNIPHIER_GPIO_IRQ_MAX_NUM	24
 
 #define UNIPHIER_GPIO_PORT_DATA		0x0	/* data */
@@ -147,15 +144,14 @@ static void uniphier_gpio_set(struct gpio_chip *chip,
 static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
 				       unsigned long *mask, unsigned long *bits)
 {
-	unsigned int bank, shift, bank_mask, bank_bits;
-	int i;
+	unsigned long i;
+	unsigned long bank_mask;
+	unsigned long bank;
+	unsigned long bank_bits;
 
-	for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
+	for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
 		bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
-		shift = i % BITS_PER_LONG;
-		bank_mask = (mask[BIT_WORD(i)] >> shift) &
-						UNIPHIER_GPIO_BANK_MASK;
-		bank_bits = bits[BIT_WORD(i)] >> shift;
+		bank_bits = bitmap_get_value8(bits, i);
 
 		uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
 					 bank_mask, bank_bits);
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

From: "William Breathitt Gray" <vilhelm.gray@gmail.com>
To: "linus.walleij@linaro.org" <linus.walleij@linaro.org>,
	"bgolaszewski@baylibre.com" <bgolaszewski@baylibre.com>,
	"akpm@linux-foundation.org" <akpm@linux-foundation.org>
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>,
	"preid@electromag.com.au" <preid@electromag.com.au>,
	"yamada.masahiro@socionext.com" <yamada.masahiro@socionext.com>,
	"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
	"linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"morten.tiljeset@prevas.dk" <morten.tiljeset@prevas.dk>,
	"sean.nyekjaer@prevas.dk" <sean.nyekjaer@prevas.dk>,
	"linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
	"lukas@wunner.de" <lukas@wunner.de>,
	"geert@linux-m68k.org" <geert@linux-m68k.org>,
	William Breathitt Gray <vilhelm.gray@gmail.com>,
	"andriy.shevchenko@linux.intel.com"
	<andriy.shevchenko@linux.intel.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v17 09/14] gpio: uniphier: Utilize for_each_set_clump8 macro
Date: Wed,  9 Oct 2019 11:27:07 -0400
Message-ID: 271a7735b02b6a8b1f54c018e38ea932d1fd299e.1570633189.git.vilhelm.gray@gmail.com
Message-ID: <20191009152707.sfJYubywRtReDn97o7O67fFT3_vvGqXQy763hbeSmgI@z> (raw)
In-Reply-To: <cover.1570633189.git.vilhelm.gray@gmail.com>

Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity. An
improvement in this case is that banks that are not masked will now be
skipped.

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
 drivers/gpio/gpio-uniphier.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c
index 93cdcc41e9fb..3e4b15d0231e 100644
--- a/drivers/gpio/gpio-uniphier.c
+++ b/drivers/gpio/gpio-uniphier.c
@@ -15,9 +15,6 @@
 #include <linux/spinlock.h>
 #include <dt-bindings/gpio/uniphier-gpio.h>
 
-#define UNIPHIER_GPIO_BANK_MASK		\
-				GENMASK((UNIPHIER_GPIO_LINES_PER_BANK) - 1, 0)
-
 #define UNIPHIER_GPIO_IRQ_MAX_NUM	24
 
 #define UNIPHIER_GPIO_PORT_DATA		0x0	/* data */
@@ -147,15 +144,14 @@ static void uniphier_gpio_set(struct gpio_chip *chip,
 static void uniphier_gpio_set_multiple(struct gpio_chip *chip,
 				       unsigned long *mask, unsigned long *bits)
 {
-	unsigned int bank, shift, bank_mask, bank_bits;
-	int i;
+	unsigned long i;
+	unsigned long bank_mask;
+	unsigned long bank;
+	unsigned long bank_bits;
 
-	for (i = 0; i < chip->ngpio; i += UNIPHIER_GPIO_LINES_PER_BANK) {
+	for_each_set_clump8(i, bank_mask, mask, chip->ngpio) {
 		bank = i / UNIPHIER_GPIO_LINES_PER_BANK;
-		shift = i % BITS_PER_LONG;
-		bank_mask = (mask[BIT_WORD(i)] >> shift) &
-						UNIPHIER_GPIO_BANK_MASK;
-		bank_bits = bits[BIT_WORD(i)] >> shift;
+		bank_bits = bitmap_get_value8(bits, i);
 
 		uniphier_gpio_bank_write(chip, bank, UNIPHIER_GPIO_PORT_DATA,
 					 bank_mask, bank_bits);
-- 
2.23.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply index

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-09 15:26 [PATCH v17 00/14] Introduce the " William Breathitt Gray
2019-10-09 15:26 ` William Breathitt Gray
2019-10-09 15:26 ` [PATCH v17 01/14] bitops: " William Breathitt Gray
2019-10-09 15:26   ` William Breathitt Gray
2019-10-09 16:28   ` Masahiro Yamada
2019-10-09 16:28     ` Masahiro Yamada
2019-10-09 17:02     ` William Breathitt Gray
2019-10-09 17:09     ` Andy Shevchenko
2019-10-09 18:54       ` Geert Uytterhoeven
2019-10-10  2:28         ` Masahiro Yamada
2019-10-10  5:49           ` Andy Shevchenko
2019-10-10  6:29             ` Geert Uytterhoeven
2019-10-10  7:41               ` Andy Shevchenko
2019-10-10  7:49                 ` Geert Uytterhoeven
2019-10-10  8:07                   ` Andy Shevchenko
2019-10-10  8:21                     ` Geert Uytterhoeven
2019-10-10 13:12                       ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 02/14] lib/test_bitmap.c: Add for_each_set_clump8 test cases William Breathitt Gray
2019-10-09 15:27   ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 03/14] gpio: 104-dio-48e: Utilize for_each_set_clump8 macro William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 04/14] gpio: 104-idi-48: " William Breathitt Gray
2019-10-09 15:27   ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 05/14] gpio: gpio-mm: " William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 06/14] gpio: ws16c48: " William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 07/14] gpio: pci-idio-16: " William Breathitt Gray
2019-10-09 15:27   ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 08/14] gpio: pcie-idio-24: " William Breathitt Gray
2019-10-09 15:27   ` William Breathitt Gray
2019-10-09 15:27 ` William Breathitt Gray [this message]
2019-10-09 15:27   ` [PATCH v17 09/14] gpio: uniphier: " William Breathitt Gray
2019-10-09 16:33   ` Masahiro Yamada
2019-10-09 16:33     ` Masahiro Yamada
2019-10-09 17:05     ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 10/14] gpio: 74x164: Utilize the " William Breathitt Gray
2019-10-09 15:27   ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 11/14] thermal: intel: intel_soc_dts_iosf: Utilize " William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 12/14] gpio: pisosr: Utilize the " William Breathitt Gray
2019-10-09 15:27   ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 13/14] gpio: max3191x: " William Breathitt Gray
2019-10-09 15:27   ` William Breathitt Gray
2019-10-09 15:27 ` [PATCH v17 14/14] gpio: pca953x: " William Breathitt Gray
2019-10-09 15:27   ` William Breathitt Gray

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=271a7735b02b6a8b1f54c018e38ea932d1fd299e.1570633189.git.vilhelm.gray@gmail.com \
    --to=vilhelm.gray@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=geert@linux-m68k.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux@rasmusvillemoes.dk \
    --cc=lukas@wunner.de \
    --cc=morten.tiljeset@prevas.dk \
    --cc=preid@electromag.com.au \
    --cc=sean.nyekjaer@prevas.dk \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git