linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards
@ 2021-08-12 11:23 Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 01/29] dt-bindings: arm: renesas: Document more R-Car Gen3e Socs " Geert Uytterhoeven
                   ` (28 more replies)
  0 siblings, 29 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

	Hi all,

The new R-Car Gen3e SoCs are different gradings of the existing R-Car
Gen3 SoCs.  This patch series adds support for the remaining R-Car Gen3e
SoCs.

Changes compared to v1 (not posted publicly):
  - Drop "mmc: renesas_sdhi: Add support for more R-Car Gen3e SoCs"
    (obsoleted by "[PATCH v4] mmc: host: renesas_sdhi: Refactor
    renesas_sdhi_probe()"[1]),
  - Drop "ravb: Add support for R-Car E3e and D3e" (not needed as the
    affected code is meant for legacy DTBs only),
  - Drop "usb: gadget: udc: renesas_usb3: Add support for R-Car E3e"
    (obsoleted by "[PATCH] usb: gadget: udc: renesas_usb3: Fix
    soc_device_match() abuse"[2]),
  - Typo s/R8A779M/R8A779M0/,
  - Add Reviewed-by,
  - Drop new soc_rcar_*3*e, just use the existing soc_rcar_*3*.
  - Drop bogus "based" in model name,
  - Replace "D3" by "D3(e)", and "E3" by "E3(e)".

This has been tested on Salvator-XS with R-Car H3 ES2.0 and M3-N ES1.0,
Salvator-X with R-Car M3-W ES1.0, Ebisu-4D with R-Car E3 ES1.0, and
Draak with R-Car D3 ES1.0.

For testing, a branch with dependencies and fixups for prototyping R-Car
Gen3e development on older Gen3 SoCs can be found at[3].

Thanks for your comments!

[1] https://lore.kernel.org/r/20210729103234.480743-1-yoshihiro.shimoda.uh@renesas.com
[2] https://lore.kernel.org/r/760981fb4cd110d7cbfc9dcffa365e7c8b25c6e5.1628696960.git.geert+renesas@glider.be
[3] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/rcar-gen3e-extra-v2

Geert Uytterhoeven (29):
  dt-bindings: arm: renesas: Document more R-Car Gen3e Socs and boards
  soc: renesas: Identify more R-Car Gen3e SoCs
  arm64: dts: renesas: Factor out Draak board support
  arm64: dts: renesas: Factor out Ebisu board support
  arm64: dts: renesas: Add Renesas R8A779M0 SoC support
  arm64: dts: renesas: Add Renesas R8A779M2 SoC support
  arm64: dts: renesas: Add Renesas R8A779M4 SoC support
  arm64: dts: renesas: Add Renesas R8A779M5 SoC support
  arm64: dts: renesas: Add Renesas R8A779M6 SoC support
  arm64: dts: renesas: Add Renesas R8A779M7 SoC support
  arm64: dts: renesas: Add Renesas R8A779M8 SoC support
  arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e
  arm64: dts: renesas: Add support for H3ULCB with R-Car H3e
  arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3e
  arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e
  arm64: dts: renesas: Add support for M3ULCB with R-Car M3e
  arm64: dts: renesas: Add support for M3ULCB+Kingfisher with R-Car M3e
  arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne
  arm64: dts: renesas: Add support for M3NULCB with R-Car M3Ne
  arm64: dts: renesas: Add support for M3NULCB+Kingfisher with R-Car
    M3Ne
  arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne-2G
  arm64: dts: renesas: Add support for M3NULCB with R-Car M3Ne-2G
  arm64: dts: renesas: Add support for M3NULCB+Kingfisher with R-Car
    M3Ne-2G
  arm64: dts: renesas: Add support for Ebisu with R-Car E3e
  arm64: dts: renesas: Add support for Draak with R-Car D3e
  arm64: dts: renesas: Add support for Salvator-XS with R-Car H3Ne
  arm64: dts: renesas: Add support for H3ULCB with R-Car H3Ne
  arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3Ne
  [RFC] arm64: dts: renesas: r8a779m5: Add Cortex-A57 2 GHz opp

 .../devicetree/bindings/arm/renesas.yaml      |  61 ++
 arch/arm64/boot/dts/renesas/Makefile          |  24 +
 .../{r8a77995-draak.dts => draak.dtsi}        |  10 +-
 .../{r8a77990-ebisu.dts => ebisu.dtsi}        |  10 +-
 .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 788 +-----------------
 .../arm64/boot/dts/renesas/r8a77995-draak.dts | 671 +--------------
 .../boot/dts/renesas/r8a779m0-salvator-xs.dts |  53 ++
 .../boot/dts/renesas/r8a779m0-ulcb-kf.dts     |  19 +
 arch/arm64/boot/dts/renesas/r8a779m0-ulcb.dts |  53 ++
 arch/arm64/boot/dts/renesas/r8a779m0.dtsi     |  12 +
 .../boot/dts/renesas/r8a779m2-salvator-xs.dts |  46 +
 .../boot/dts/renesas/r8a779m2-ulcb-kf.dts     |  18 +
 arch/arm64/boot/dts/renesas/r8a779m2-ulcb.dts |  45 +
 arch/arm64/boot/dts/renesas/r8a779m2.dtsi     |  12 +
 .../boot/dts/renesas/r8a779m4-salvator-xs.dts |  36 +
 .../boot/dts/renesas/r8a779m4-ulcb-kf.dts     |  19 +
 arch/arm64/boot/dts/renesas/r8a779m4-ulcb.dts |  36 +
 arch/arm64/boot/dts/renesas/r8a779m4.dtsi     |  12 +
 .../boot/dts/renesas/r8a779m5-salvator-xs.dts |  36 +
 .../boot/dts/renesas/r8a779m5-ulcb-kf.dts     |  19 +
 arch/arm64/boot/dts/renesas/r8a779m5-ulcb.dts |  36 +
 arch/arm64/boot/dts/renesas/r8a779m5.dtsi     |  21 +
 .../arm64/boot/dts/renesas/r8a779m6-ebisu.dts |  18 +
 arch/arm64/boot/dts/renesas/r8a779m6.dtsi     |  12 +
 .../arm64/boot/dts/renesas/r8a779m7-draak.dts |  19 +
 arch/arm64/boot/dts/renesas/r8a779m7.dtsi     |  12 +
 .../boot/dts/renesas/r8a779m8-salvator-xs.dts |  53 ++
 .../boot/dts/renesas/r8a779m8-ulcb-kf.dts     |  19 +
 arch/arm64/boot/dts/renesas/r8a779m8-ulcb.dts |  52 ++
 arch/arm64/boot/dts/renesas/r8a779m8.dtsi     |  12 +
 drivers/soc/renesas/Kconfig                   |   7 +-
 drivers/soc/renesas/renesas-soc.c             |   7 +
 32 files changed, 777 insertions(+), 1471 deletions(-)
 copy arch/arm64/boot/dts/renesas/{r8a77995-draak.dts => draak.dtsi} (97%)
 copy arch/arm64/boot/dts/renesas/{r8a77990-ebisu.dts => ebisu.dtsi} (98%)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m0-salvator-xs.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m0-ulcb-kf.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m0-ulcb.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m0.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m2-salvator-xs.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m2-ulcb-kf.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m2-ulcb.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m2.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m4-salvator-xs.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m4-ulcb-kf.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m4-ulcb.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m4.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m5-ulcb-kf.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m5-ulcb.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m5.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m6-ebisu.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m6.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m7-draak.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m7.dtsi
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m8-salvator-xs.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m8-ulcb-kf.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m8-ulcb.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m8.dtsi

-- 
2.25.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 31+ messages in thread

* [PATCH v2 01/29] dt-bindings: arm: renesas: Document more R-Car Gen3e Socs and boards
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
@ 2021-08-12 11:23 ` Geert Uytterhoeven
  2021-08-17 21:30   ` Rob Herring
  2021-08-12 11:23 ` [PATCH v2 02/29] soc: renesas: Identify more R-Car Gen3e SoCs Geert Uytterhoeven
                   ` (27 subsequent siblings)
  28 siblings, 1 reply; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Document the compatible values for the remaining R-Car Gen3e SoCs: R-Car
H3e (R8A779M0), M3e (R8A779M2), M3Ne (R8A779M4), M3Ne-2G (R8A779M5), E3e
(R8A779M6), D3e (R8A779M7), and H3Ne (R8A779M8).  These are different
gradings of R-Car Gen3 SoCs.

All R-Car Gen3e on-SoC devices are identical to the devices on the
corresponding R-Car Gen3 SoCs, and thus just use the compatible values
for the latter.  The root compatible properties do gain an additional
value, to sort out integration issues if they ever arise.

Document the use of these SoCs on the Salvator-XS, ULCB (with and
without Kingfisher extension), Ebisu, and Draak development boards.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Typo s/R8A779M/R8A779M0/,
  - Add Reviewed-by.
---
 .../devicetree/bindings/arm/renesas.yaml      | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 8a11918866b86482..5172065078014f39 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -255,12 +255,19 @@ properties:
               - enum:
                   - renesas,h3ulcb
                   - renesas,m3ulcb
+                  - renesas,m3nulcb
               - enum:
+                  - renesas,r8a779m0
                   - renesas,r8a779m1
+                  - renesas,r8a779m2
                   - renesas,r8a779m3
+                  - renesas,r8a779m4
+                  - renesas,r8a779m5
+                  - renesas,r8a779m8
               - enum:
                   - renesas,r8a7795
                   - renesas,r8a77961
+                  - renesas,r8a77965
 
       - description: R-Car M3-N (R8A77965)
         items:
@@ -308,6 +315,14 @@ properties:
           - const: renesas,falcon-cpu
           - const: renesas,r8a779a0
 
+      - description: R-Car H3e (R8A779M0)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m0
+          - const: renesas,r8a7795
+
       - description: R-Car H3e-2G (R8A779M1)
         items:
           - enum:
@@ -316,6 +331,14 @@ properties:
           - const: renesas,r8a779m1
           - const: renesas,r8a7795
 
+      - description: R-Car M3e (R8A779M2)
+        items:
+          - enum:
+              - renesas,m3ulcb      # M3ULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m2
+          - const: renesas,r8a77961
+
       - description: R-Car M3e-2G (R8A779M3)
         items:
           - enum:
@@ -324,6 +347,44 @@ properties:
           - const: renesas,r8a779m3
           - const: renesas,r8a77961
 
+      - description: R-Car M3Ne (R8A779M4)
+        items:
+          - enum:
+              - renesas,m3nulcb     # M3NULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m4
+          - const: renesas,r8a77965
+
+      - description: R-Car M3Ne-2G (R8A779M5)
+        items:
+          - enum:
+              - renesas,m3nulcb     # M3NULCB (R-Car Starter Kit Pro)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m5
+          - const: renesas,r8a77965
+
+      - description: R-Car E3e (R8A779M6)
+        items:
+          - enum:
+              - renesas,ebisu       # Ebisu
+          - const: renesas,r8a779m6
+          - const: renesas,r8a77990
+
+      - description: R-Car D3e (R8A779M7)
+        items:
+          - enum:
+              - renesas,draak       # Draak
+          - const: renesas,r8a779m7
+          - const: renesas,r8a77995
+
+      - description: R-Car H3Ne (R8A779M8)
+        items:
+          - enum:
+              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
+              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
+          - const: renesas,r8a779m8
+          - const: renesas,r8a7795
+
       - description: RZ/N1D (R9A06G032)
         items:
           - enum:
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 02/29] soc: renesas: Identify more R-Car Gen3e SoCs
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 01/29] dt-bindings: arm: renesas: Document more R-Car Gen3e Socs " Geert Uytterhoeven
@ 2021-08-12 11:23 ` Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 03/29] arm64: dts: renesas: Factor out Draak board support Geert Uytterhoeven
                   ` (26 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

Add support for identifying the remaining R-Car Gen3e SoCs: R-Car H3e
(R8A779M0), M3e (R8A779M2), M3Ne (R8A779M4), M3Ne-2G (R8A779M5), E3e
(R8A779M6), D3e (R8A779M7), and H3Ne (R8A779M8).

As these are different gradings of the already supported R-Car Gen3
SoCs, support for them is enabled through the existing ARCH_R8A779*
configuration symbols.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - Drop new soc_rcar_*3*e, just use the existing soc_rcar_*3*.
---
 drivers/soc/renesas/Kconfig       | 7 +++++--
 drivers/soc/renesas/renesas-soc.c | 7 +++++++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index a736b32555f21904..7f7c8f72d5f2b67a 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -191,6 +191,7 @@ config ARCH_R8A77995
 	select SYSC_R8A77995
 	help
 	  This enables support for the Renesas R-Car D3 SoC.
+	  This includes different gradings like R-Car D3e.
 
 config ARCH_R8A77990
 	bool "ARM64 Platform support for R-Car E3"
@@ -198,6 +199,7 @@ config ARCH_R8A77990
 	select SYSC_R8A77990
 	help
 	  This enables support for the Renesas R-Car E3 SoC.
+	  This includes different gradings like R-Car E3e.
 
 config ARCH_R8A77950
 	bool "ARM64 Platform support for R-Car H3 ES1.x"
@@ -213,7 +215,7 @@ config ARCH_R8A77951
 	help
 	  This enables support for the Renesas R-Car H3 SoC (revisions 2.0 and
 	  later).
-	  This includes different gradings like R-Car H3e-2G.
+	  This includes different gradings like R-Car H3e, H3e-2G, and H3Ne.
 
 config ARCH_R8A77965
 	bool "ARM64 Platform support for R-Car M3-N"
@@ -221,6 +223,7 @@ config ARCH_R8A77965
 	select SYSC_R8A77965
 	help
 	  This enables support for the Renesas R-Car M3-N SoC.
+	  This includes different gradings like R-Car M3Ne and M3Ne-2G.
 
 config ARCH_R8A77960
 	bool "ARM64 Platform support for R-Car M3-W"
@@ -235,7 +238,7 @@ config ARCH_R8A77961
 	select SYSC_R8A77961
 	help
 	  This enables support for the Renesas R-Car M3-W+ SoC.
-	  This includes different gradings like R-Car M3e-2G.
+	  This includes different gradings like R-Car M3e and M3e-2G.
 
 config ARCH_R8A77980
 	bool "ARM64 Platform support for R-Car V3H"
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index dab9f5a0aad00233..7961b0be1850922d 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -285,17 +285,22 @@ static const struct of_device_id renesas_socs[] __initconst = {
 	{ .compatible = "renesas,r8a7795",	.data = &soc_rcar_h3 },
 #endif
 #ifdef CONFIG_ARCH_R8A77951
+	{ .compatible = "renesas,r8a779m0",	.data = &soc_rcar_h3 },
 	{ .compatible = "renesas,r8a779m1",	.data = &soc_rcar_h3 },
+	{ .compatible = "renesas,r8a779m8",	.data = &soc_rcar_h3 },
 #endif
 #ifdef CONFIG_ARCH_R8A77960
 	{ .compatible = "renesas,r8a7796",	.data = &soc_rcar_m3_w },
 #endif
 #ifdef CONFIG_ARCH_R8A77961
 	{ .compatible = "renesas,r8a77961",	.data = &soc_rcar_m3_w },
+	{ .compatible = "renesas,r8a779m2",	.data = &soc_rcar_m3_w },
 	{ .compatible = "renesas,r8a779m3",	.data = &soc_rcar_m3_w },
 #endif
 #ifdef CONFIG_ARCH_R8A77965
 	{ .compatible = "renesas,r8a77965",	.data = &soc_rcar_m3_n },
+	{ .compatible = "renesas,r8a779m4",	.data = &soc_rcar_m3_n },
+	{ .compatible = "renesas,r8a779m5",	.data = &soc_rcar_m3_n },
 #endif
 #ifdef CONFIG_ARCH_R8A77970
 	{ .compatible = "renesas,r8a77970",	.data = &soc_rcar_v3m },
@@ -305,9 +310,11 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #endif
 #ifdef CONFIG_ARCH_R8A77990
 	{ .compatible = "renesas,r8a77990",	.data = &soc_rcar_e3 },
+	{ .compatible = "renesas,r8a779m6",	.data = &soc_rcar_e3 },
 #endif
 #ifdef CONFIG_ARCH_R8A77995
 	{ .compatible = "renesas,r8a77995",	.data = &soc_rcar_d3 },
+	{ .compatible = "renesas,r8a779m7",	.data = &soc_rcar_d3 },
 #endif
 #ifdef CONFIG_ARCH_R8A779A0
 	{ .compatible = "renesas,r8a779a0",	.data = &soc_rcar_v3u },
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 03/29] arm64: dts: renesas: Factor out Draak board support
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 01/29] dt-bindings: arm: renesas: Document more R-Car Gen3e Socs " Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 02/29] soc: renesas: Identify more R-Car Gen3e SoCs Geert Uytterhoeven
@ 2021-08-12 11:23 ` Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 04/29] arm64: dts: renesas: Factor out Ebisu " Geert Uytterhoeven
                   ` (25 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Move the common parts for the Renesas Draak board to draak.dtsi, to
avoid future duplication of board descriptions.

Change a reference in a comment from "r8a77995" to "R-Car D3(e)", to
prepare for the advent of "R-Car D3e".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Drop bogus "based" in model name,
  - Replace "D3" by "D3(e)",
  - Add Reviewed-by,
  - Rebased.
---
 .../{r8a77995-draak.dts => draak.dtsi}        |  10 +-
 .../arm64/boot/dts/renesas/r8a77995-draak.dts | 671 +-----------------
 2 files changed, 5 insertions(+), 676 deletions(-)
 copy arch/arm64/boot/dts/renesas/{r8a77995-draak.dts => draak.dtsi} (97%)

diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/draak.dtsi
similarity index 97%
copy from arch/arm64/boot/dts/renesas/r8a77995-draak.dts
copy to arch/arm64/boot/dts/renesas/draak.dtsi
index 1ac15aa05b823ba9..ff799ab73f8a479d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -1,19 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the Draak board with R-Car D3
+ * Device Tree Source for the Draak board
  *
  * Copyright (C) 2016-2018 Renesas Electronics Corp.
  * Copyright (C) 2017 Glider bvba
  */
 
-/dts-v1/;
-#include "r8a77995.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
-	model = "Renesas Draak board based on r8a77995";
-	compatible = "renesas,draak", "renesas,r8a77995";
+	model = "Renesas Draak board";
+	compatible = "renesas,draak";
 
 	aliases {
 		serial0 = &scif2;
@@ -253,7 +251,7 @@ phy0: ethernet-phy@0 {
 		 * TX clock internal delay mode is required for reliable
 		 * 1Gbps communication using the KSZ9031RNX phy present on
 		 * the Draak board, however, TX clock internal delay mode
-		 * isn't supported on r8a77995.  Thus, limit speed to
+		 * isn't supported on R-Car D3(e).  Thus, limit speed to
 		 * 100Mbps for reliable communication.
 		 */
 		max-speed = <100>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 1ac15aa05b823ba9..384825617fcff1ff 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -8,678 +8,9 @@
 
 /dts-v1/;
 #include "r8a77995.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "draak.dtsi"
 
 / {
 	model = "Renesas Draak board based on r8a77995";
 	compatible = "renesas,draak", "renesas,r8a77995";
-
-	aliases {
-		serial0 = &scif2;
-		ethernet0 = &avb;
-	};
-
-	audio_clkout: audio-clkout {
-		/*
-		 * This is same as <&rcar_sound 0>
-		 * but needed to avoid cs2000/rcar_sound probe dead-lock
-		 */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12288000>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 50000>;
-
-		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
-		default-brightness-level = <10>;
-
-		power-supply = <&reg_12p0v>;
-		enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	composite-in {
-		compatible = "composite-video-connector";
-
-		port {
-			composite_con_in: endpoint {
-				remote-endpoint = <&adv7180_in>;
-			};
-		};
-	};
-
-	hdmi-in {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_in: endpoint {
-				remote-endpoint = <&adv7612_in>;
-			};
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_out: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keys_pins>;
-		pinctrl-names = "default";
-
-		key-1 {
-			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW56-1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-2 {
-			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW56-2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-3 {
-			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW56-3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW56-4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	lvds-decoder {
-		compatible = "thine,thc63lvd1024";
-		vcc-supply = <&reg_3p3v>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				thc63lvd1024_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				thc63lvd1024_out: endpoint {
-					remote-endpoint = <&adv7511_in>;
-				};
-			};
-		};
-	};
-
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x18000000>;
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_12p0v: regulator-12p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "D12.0V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	sound_card: sound {
-		compatible = "audio-graph-card";
-
-		dais = <&rsnd_port0	/* ak4613 */
-			/* HDMI is not yet supported */
-		>;
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&adv7123_out>;
-			};
-		};
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7123_in: endpoint {
-					remote-endpoint = <&du_out_rgb>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				adv7123_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	x12_clk: x12 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-
-	x19_clk: x19 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-};
-
-&audio_clk_b {
-	/*
-	 * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB,
-	 * and R-Car Sound uses AUDIO_CLKB.
-	 * Note is that schematic indicates VI4_FIELD conection only
-	 * not AUDIO_CLKB at SoC page.
-	 * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60.
-	 * SW60 should be 1-2.
-	 */
-
-	clock-frequency = <22579200>;
-};
-
-&avb {
-	pinctrl-0 = <&avb0_pins>;
-	pinctrl-names = "default";
-	renesas,no-ether-link;
-	phy-handle = <&phy0>;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
-		/*
-		 * TX clock internal delay mode is required for reliable
-		 * 1Gbps communication using the KSZ9031RNX phy present on
-		 * the Draak board, however, TX clock internal delay mode
-		 * isn't supported on r8a77995.  Thus, limit speed to
-		 * 100Mbps for reliable communication.
-		 */
-		max-speed = <100>;
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-0 = <&can1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>,
-		 <&cpg CPG_MOD 723>,
-		 <&x12_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7123_in>;
-			};
-		};
-	};
-};
-
-&ehci0 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <48000000>;
-};
-
-&hsusb {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	ak4613: codec@10 {
-		compatible = "asahi-kasei,ak4613";
-		#sound-dai-cells = <0>;
-		reg = <0x10>;
-		clocks = <&rcar_sound 0>; /* audio_clkout */
-
-		asahi-kasei,in1-single-end;
-		asahi-kasei,in2-single-end;
-		asahi-kasei,out1-single-end;
-		asahi-kasei,out2-single-end;
-		asahi-kasei,out3-single-end;
-		asahi-kasei,out4-single-end;
-		asahi-kasei,out5-single-end;
-		asahi-kasei,out6-single-end;
-
-		port {
-			ak4613_endpoint: endpoint {
-				remote-endpoint = <&rsnd_for_ak4613>;
-			};
-		};
-	};
-
-	composite-in@20 {
-		compatible = "adi,adv7180cp";
-		reg = <0x20>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7180_in: endpoint {
-					remote-endpoint = <&composite_con_in>;
-				};
-			};
-
-			port@3 {
-				reg = <3>;
-
-				/*
-				 * The VIN4 video input path is shared between
-				 * CVBS and HDMI inputs through SW[49-53]
-				 * switches.
-				 *
-				 * CVBS is the default selection, link it to
-				 * VIN4 here.
-				 */
-				adv7180_out: endpoint {
-					remote-endpoint = <&vin4_in>;
-				};
-			};
-		};
-
-	};
-
-	hdmi-encoder@39 {
-		compatible = "adi,adv7511w";
-		reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
-		reg-names = "main", "edid", "cec", "packet";
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7511_in: endpoint {
-					remote-endpoint = <&thc63lvd1024_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con_out>;
-				};
-			};
-		};
-	};
-
-	hdmi-decoder@4c {
-		compatible = "adi,adv7612";
-		reg = <0x4c>;
-		default-input = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				adv7612_in: endpoint {
-					remote-endpoint = <&hdmi_con_in>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				/*
-				 * The VIN4 video input path is shared between
-				 * CVBS and HDMI inputs through SW[49-53]
-				 * switches.
-				 *
-				 * CVBS is the default selection, leave HDMI
-				 * not connected here.
-				 */
-				adv7612_out: endpoint {
-					pclk-sample = <0>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-				};
-			};
-		};
-	};
-
-	cs2000: clk-multiplier@4f {
-		#clock-cells = <0>;
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4f>;
-		clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */
-		clock-names = "clk_in", "ref_clk";
-
-		assigned-clocks = <&cs2000>;
-		assigned-clock-rates = <24576000>; /* 1/1 divide */
-	};
-
-	eeprom@50 {
-		compatible = "rohm,br24t01", "atmel,24c01";
-		reg = <0x50>;
-		pagesize = <8>;
-	};
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&lvds0 {
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 727>,
-		 <&x12_clk>,
-		 <&extal_clk>;
-	clock-names = "fck", "dclkin.0", "extal";
-
-	ports {
-		port@1 {
-			lvds0_out: endpoint {
-				remote-endpoint = <&thc63lvd1024_in>;
-			};
-		};
-	};
-};
-
-&lvds1 {
-	/*
-	 * Even though the LVDS1 output is not connected, the encoder must be
-	 * enabled to supply a pixel clock to the DU for the DPAD output when
-	 * LVDS0 is in use.
-	 */
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 727>,
-		 <&x12_clk>,
-		 <&extal_clk>;
-	clock-names = "fck", "dclkin.0", "extal";
-};
-
-&ohci0 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&pfc {
-	avb0_pins: avb {
-		groups = "avb0_link", "avb0_mdio", "avb0_mii";
-		function = "avb0";
-	};
-
-	can0_pins: can0 {
-		groups = "can0_data_a";
-		function = "can0";
-	};
-
-	can1_pins: can1 {
-		groups = "can1_data_a";
-		function = "can1";
-	};
-
-	du_pins: du {
-		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
-		function = "du";
-	};
-
-	i2c0_pins: i2c0 {
-		groups = "i2c0";
-		function = "i2c0";
-	};
-
-	i2c1_pins: i2c1 {
-		groups = "i2c1";
-		function = "i2c1";
-	};
-
-	keys_pins: keys {
-		pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15";
-		bias-pull-up;
-	};
-
-	pwm0_pins: pwm0 {
-		groups = "pwm0_c";
-		function = "pwm0";
-	};
-
-	pwm1_pins: pwm1 {
-		groups = "pwm1_c";
-		function = "pwm1";
-	};
-
-	scif2_pins: scif2 {
-		groups = "scif2_data";
-		function = "scif2";
-	};
-
-	sdhi2_pins: sd2 {
-		groups = "mmc_data8", "mmc_ctrl";
-		function = "mmc";
-		power-source = <1800>;
-	};
-
-	sdhi2_pins_uhs: sd2_uhs {
-		groups = "mmc_data8", "mmc_ctrl";
-		function = "mmc";
-		power-source = <1800>;
-	};
-
-	sound_pins: sound {
-		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
-		function = "ssi";
-	};
-
-	sound_clk_pins: sound-clk {
-		groups = "audio_clk_a", "audio_clk_b",
-			 "audio_clkout", "audio_clkout1";
-		function = "audio_clk";
-	};
-
-	usb0_pins: usb0 {
-		groups = "usb0";
-		function = "usb0";
-	};
-
-	vin4_pins_cvbs: vin4 {
-		groups = "vin4_data8", "vin4_sync", "vin4_clk";
-		function = "vin4";
-	};
-};
-
-&pwm0 {
-	pinctrl-0 = <&pwm0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-0 = <&pwm1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	/* audio_clkout0/1 */
-	#clock-cells = <1>;
-	clock-frequency = <12288000 11289600>;
-
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 1005>,
-		 <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
-		 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
-		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-		 <&cs2000>, <&audio_clk_b>,
-		 <&cpg CPG_CORE R8A77995_CLK_ZA2>;
-
-	ports {
-		rsnd_port0: port {
-			rsnd_for_ak4613: endpoint {
-				remote-endpoint = <&ak4613_endpoint>;
-				dai-format = "left_j";
-				bitclock-master = <&rsnd_for_ak4613>;
-				frame-master = <&rsnd_for_ak4613>;
-				playback = <&ssi3>, <&src5>, <&dvc0>;
-				capture  = <&ssi4>, <&src6>, <&dvc1>;
-			};
-		};
-	};
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi2 {
-	/* used for on-board eMMC */
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-1 = <&sdhi2_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	bus-width = <8>;
-	mmc-hs200-1_8v;
-	no-sd;
-	no-sdio;
-	non-removable;
-	status = "okay";
-};
-
-&ssi4 {
-	shared-pin;
-};
-
-&usb2_phy0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	renesas,no-otg-pins;
-	status = "okay";
-};
-
-&vin4 {
-	pinctrl-0 = <&vin4_pins_cvbs>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	ports {
-		port {
-			vin4_in: endpoint {
-				remote-endpoint = <&adv7180_out>;
-			};
-		};
-	};
 };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 04/29] arm64: dts: renesas: Factor out Ebisu board support
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (2 preceding siblings ...)
  2021-08-12 11:23 ` [PATCH v2 03/29] arm64: dts: renesas: Factor out Draak board support Geert Uytterhoeven
@ 2021-08-12 11:23 ` Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 05/29] arm64: dts: renesas: Add Renesas R8A779M0 SoC support Geert Uytterhoeven
                   ` (24 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Move the common parts for the Renesas Ebisu board to ebisu.dtsi, to
avoid future duplication of board descriptions.

Change a reference in a comment from "r8a77990" to "R-Car E3(e)", to
prepare for the advent of "R-Car E3e".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Replace "E3" by "E3(e)",
  - Add Reviewed-by,
  - Rebased.
---
 .../{r8a77990-ebisu.dts => ebisu.dtsi}        |  10 +-
 .../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 788 +-----------------
 2 files changed, 5 insertions(+), 793 deletions(-)
 copy arch/arm64/boot/dts/renesas/{r8a77990-ebisu.dts => ebisu.dtsi} (98%)

diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/ebisu.dtsi
similarity index 98%
copy from arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
copy to arch/arm64/boot/dts/renesas/ebisu.dtsi
index 9c7146084ea1c779..54f88bb7e5920296 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -1,18 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the Ebisu board with R-Car E3
+ * Device Tree Source for the Ebisu board
  *
  * Copyright (C) 2018 Renesas Electronics Corp.
  */
 
-/dts-v1/;
-#include "r8a77990.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
-	model = "Renesas Ebisu board based on r8a77990";
-	compatible = "renesas,ebisu", "renesas,r8a77990";
+	model = "Renesas Ebisu board";
+	compatible = "renesas,ebisu";
 
 	aliases {
 		serial0 = &scif2;
@@ -313,7 +311,7 @@ phy0: ethernet-phy@0 {
 		 * TX clock internal delay mode is required for reliable
 		 * 1Gbps communication using the KSZ9031RNX phy present on
 		 * the Ebisu board, however, TX clock internal delay mode
-		 * isn't supported on r8a77990.  Thus, limit speed to
+		 * isn't supported on R-Car E3(e).  Thus, limit speed to
 		 * 100Mbps for reliable communication.
 		 */
 		max-speed = <100>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 9c7146084ea1c779..9da0fd08f8c46b35 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -7,795 +7,9 @@
 
 /dts-v1/;
 #include "r8a77990.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "ebisu.dtsi"
 
 / {
 	model = "Renesas Ebisu board based on r8a77990";
 	compatible = "renesas,ebisu", "renesas,r8a77990";
-
-	aliases {
-		serial0 = &scif2;
-		ethernet0 = &avb;
-		mmc0 = &sdhi3;
-		mmc1 = &sdhi0;
-		mmc2 = &sdhi1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
-		stdout-path = "serial0:115200n8";
-	};
-
-	audio_clkout: audio-clkout {
-		/*
-		 * This is same as <&rcar_sound 0>
-		 * but needed to avoid cs2000/rcar_sound probe dead-lock
-		 */
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm3 0 50000>;
-
-		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
-		default-brightness-level = <10>;
-
-		power-supply = <&reg_12p0v>;
-	};
-
-	cvbs-in {
-		compatible = "composite-video-connector";
-		label = "CVBS IN";
-
-		port {
-			cvbs_con: endpoint {
-				remote-endpoint = <&adv7482_ain7>;
-			};
-		};
-	};
-
-	hdmi-in {
-		compatible = "hdmi-connector";
-		label = "HDMI IN";
-		type = "a";
-
-		port {
-			hdmi_in_con: endpoint {
-				remote-endpoint = <&adv7482_hdmi>;
-			};
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con_out: endpoint {
-				remote-endpoint = <&adv7511_out>;
-			};
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&keys_pins>;
-		pinctrl-names = "default";
-
-		key-1 {
-			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_1>;
-			label = "SW4-1";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-2 {
-			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_2>;
-			label = "SW4-2";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-3 {
-			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_3>;
-			label = "SW4-3";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-		key-4 {
-			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_4>;
-			label = "SW4-4";
-			wakeup-source;
-			debounce-interval = <20>;
-		};
-	};
-
-	lvds-decoder {
-		compatible = "thine,thc63lvd1024";
-		vcc-supply = <&reg_3p3v>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				thc63lvd1024_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				thc63lvd1024_out: endpoint {
-					remote-endpoint = <&adv7511_in>;
-				};
-			};
-		};
-	};
-
-	memory@48000000 {
-		device_type = "memory";
-		/* first 128MB is reserved for secure area. */
-		reg = <0x0 0x48000000 0x0 0x38000000>;
-	};
-
-	reg_1p8v: regulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator1 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_12p0v: regulator2 {
-		compatible = "regulator-fixed";
-		regulator-name = "D12.0V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	rsnd_ak4613: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,name = "rsnd-ak4613";
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcpu>;
-		simple-audio-card,frame-master = <&sndcpu>;
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&ak4613>;
-		};
-
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-	};
-
-	vbus0_usb2: regulator-vbus0-usb2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB20_VBUS_CN";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vcc_sdhi0: regulator-vcc-sdhi0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi0: regulator-vccq-sdhi0 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vcc_sdhi1: regulator-vcc-sdhi1 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI1 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-
-	vga {
-		compatible = "vga-connector";
-
-		port {
-			vga_in: endpoint {
-				remote-endpoint = <&adv7123_out>;
-			};
-		};
-	};
-
-	vga-encoder {
-		compatible = "adi,adv7123";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7123_in: endpoint {
-					remote-endpoint = <&du_out_rgb>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				adv7123_out: endpoint {
-					remote-endpoint = <&vga_in>;
-				};
-			};
-		};
-	};
-
-	x12_clk: x12 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24576000>;
-	};
-
-	x13_clk: x13 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <74250000>;
-	};
-};
-
-&audio_clk_a {
-	clock-frequency = <22579200>;
-};
-
-&avb {
-	pinctrl-0 = <&avb_pins>;
-	pinctrl-names = "default";
-	phy-handle = <&phy0>;
-	status = "okay";
-
-	phy0: ethernet-phy@0 {
-		rxc-skew-ps = <1500>;
-		reg = <0>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-		/*
-		 * TX clock internal delay mode is required for reliable
-		 * 1Gbps communication using the KSZ9031RNX phy present on
-		 * the Ebisu board, however, TX clock internal delay mode
-		 * isn't supported on r8a77990.  Thus, limit speed to
-		 * 100Mbps for reliable communication.
-		 */
-		max-speed = <100>;
-	};
-};
-
-&canfd {
-	pinctrl-0 = <&canfd0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	channel0 {
-		status = "okay";
-	};
-};
-
-&csi40 {
-	status = "okay";
-
-	ports {
-		port@0 {
-			csi40_in: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-				remote-endpoint = <&adv7482_txa>;
-			};
-		};
-	};
-};
-
-&du {
-	pinctrl-0 = <&du_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 724>,
-		 <&cpg CPG_MOD 723>,
-		 <&x13_clk>;
-	clock-names = "du.0", "du.1", "dclkin.0";
-
-	ports {
-		port@0 {
-			endpoint {
-				remote-endpoint = <&adv7123_in>;
-			};
-		};
-	};
-};
-
-&ehci0 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&extal_clk {
-	clock-frequency = <48000000>;
-};
-
-&hsusb {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-
-	io_expander: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	hdmi-encoder@39 {
-		compatible = "adi,adv7511w";
-		reg = <0x39>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-
-		adi,input-depth = <8>;
-		adi,input-colorspace = "rgb";
-		adi,input-clock = "1x";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				adv7511_in: endpoint {
-					remote-endpoint = <&thc63lvd1024_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				adv7511_out: endpoint {
-					remote-endpoint = <&hdmi_con_out>;
-				};
-			};
-		};
-	};
-
-	video-receiver@70 {
-		compatible = "adi,adv7482";
-		reg = <0x70>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gpio0>;
-		interrupt-names = "intrq1", "intrq2";
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
-			     <17 IRQ_TYPE_LEVEL_LOW>;
-
-		port@7 {
-			reg = <7>;
-
-			adv7482_ain7: endpoint {
-				remote-endpoint = <&cvbs_con>;
-			};
-		};
-
-		port@8 {
-			reg = <8>;
-
-			adv7482_hdmi: endpoint {
-				remote-endpoint = <&hdmi_in_con>;
-			};
-		};
-
-		port@a {
-			reg = <10>;
-
-			adv7482_txa: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-				remote-endpoint = <&csi40_in>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-
-	ak4613: codec@10 {
-		compatible = "asahi-kasei,ak4613";
-		#sound-dai-cells = <0>;
-		reg = <0x10>;
-		clocks = <&rcar_sound 3>;
-
-		asahi-kasei,in1-single-end;
-		asahi-kasei,in2-single-end;
-		asahi-kasei,out1-single-end;
-		asahi-kasei,out2-single-end;
-		asahi-kasei,out3-single-end;
-		asahi-kasei,out4-single-end;
-		asahi-kasei,out5-single-end;
-		asahi-kasei,out6-single-end;
-	};
-
-	cs2000: clk-multiplier@4f {
-		#clock-cells = <0>;
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4f>;
-		clocks = <&audio_clkout>, <&x12_clk>;
-		clock-names = "clk_in", "ref_clk";
-
-		assigned-clocks = <&cs2000>;
-		assigned-clock-rates = <24576000>; /* 1/1 divide */
-	};
-};
-
-&i2c_dvfs {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	pmic: pmic@30 {
-		pinctrl-0 = <&irq0_pins>;
-		pinctrl-names = "default";
-
-		compatible = "rohm,bd9571mwv";
-		reg = <0x30>;
-		interrupt-parent = <&intc_ex>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		rohm,ddr-backup-power = <0x1>;
-		rohm,rstbmode-level;
-	};
-
-	eeprom@50 {
-		compatible = "rohm,br24t01", "atmel,24c01";
-		reg = <0x50>;
-		pagesize = <8>;
-	};
-};
-
-&lvds0 {
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 727>,
-		 <&x13_clk>,
-		 <&extal_clk>;
-	clock-names = "fck", "dclkin.0", "extal";
-
-	ports {
-		port@1 {
-			lvds0_out: endpoint {
-				remote-endpoint = <&thc63lvd1024_in>;
-			};
-		};
-	};
-};
-
-&lvds1 {
-	/*
-	 * Even though the LVDS1 output is not connected, the encoder must be
-	 * enabled to supply a pixel clock to the DU for the DPAD output when
-	 * LVDS0 is in use.
-	 */
-	status = "okay";
-
-	clocks = <&cpg CPG_MOD 727>,
-		 <&x13_clk>,
-		 <&extal_clk>;
-	clock-names = "fck", "dclkin.0", "extal";
-};
-
-&ohci0 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&pcie_bus_clk {
-	clock-frequency = <100000000>;
-};
-
-&pciec0 {
-	status = "okay";
-};
-
-&pfc {
-	avb_pins: avb {
-		groups = "avb_link", "avb_mii";
-		function = "avb";
-	};
-
-	canfd0_pins: canfd0 {
-		groups = "canfd0_data";
-		function = "canfd0";
-	};
-
-	du_pins: du {
-		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
-		function = "du";
-	};
-
-	irq0_pins: irq0 {
-		groups = "intc_ex_irq0";
-		function = "intc_ex";
-	};
-
-	keys_pins: keys {
-		pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
-		bias-pull-up;
-	};
-
-	pwm3_pins: pwm3 {
-		groups = "pwm3_b";
-		function = "pwm3";
-	};
-
-	pwm5_pins: pwm5 {
-		groups = "pwm5_a";
-		function = "pwm5";
-	};
-
-	scif2_pins: scif2 {
-		groups = "scif2_data_a";
-		function = "scif2";
-	};
-
-	sdhi0_pins: sd0 {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <3300>;
-	};
-
-	sdhi0_pins_uhs: sd0_uhs {
-		groups = "sdhi0_data4", "sdhi0_ctrl";
-		function = "sdhi0";
-		power-source = <1800>;
-	};
-
-	sdhi1_pins: sd1 {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <3300>;
-	};
-
-	sdhi1_pins_uhs: sd1_uhs {
-		groups = "sdhi1_data4", "sdhi1_ctrl";
-		function = "sdhi1";
-		power-source = <1800>;
-	};
-
-	sdhi3_pins: sd3 {
-		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
-		function = "sdhi3";
-		power-source = <1800>;
-	};
-
-	sound_clk_pins: sound_clk {
-		groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
-			 "audio_clkout_a", "audio_clkout1_a";
-		function = "audio_clk";
-	};
-
-	sound_pins: sound {
-		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
-		function = "ssi";
-	};
-
-	usb0_pins: usb {
-		groups = "usb0_b", "usb0_id";
-		function = "usb0";
-	};
-
-	usb30_pins: usb30 {
-		groups = "usb30";
-		function = "usb30";
-	};
-};
-
-&pwm3 {
-	pinctrl-0 = <&pwm3_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pwm5 {
-	pinctrl-0 = <&pwm5_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&rcar_sound {
-	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	/* audio_clkout0/1/2/3 */
-	#clock-cells = <1>;
-	clock-frequency = <12288000 11289600>;
-
-	status = "okay";
-
-	/* update <audio_clk_b> to <cs2000> */
-	clocks = <&cpg CPG_MOD 1005>,
-		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
-		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
-		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
-		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
-		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
-		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
-		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
-		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
-		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
-		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
-		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
-		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
-		 <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
-		 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
-
-	rcar_sound,dai {
-		dai0 {
-			playback = <&ssi0>, <&src0>, <&dvc0>;
-			capture  = <&ssi1>, <&src1>, <&dvc1>;
-		};
-	};
-
-};
-
-&rwdt {
-	timeout-sec = <60>;
-	status = "okay";
-};
-
-&scif2 {
-	pinctrl-0 = <&scif2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-1 = <&sdhi0_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
-	bus-width = <4>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-1 = <&sdhi1_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&vcc_sdhi1>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&sdhi3 {
-	/* used for on-board 8bit eMMC */
-	pinctrl-0 = <&sdhi3_pins>;
-	pinctrl-1 = <&sdhi3_pins>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	bus-width = <8>;
-	no-sd;
-	no-sdio;
-	non-removable;
-	full-pwr-cycle-in-suspend;
-	status = "okay";
-};
-
-&ssi1 {
-	shared-pin;
-};
-
-&usb2_phy0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	vbus-supply = <&vbus0_usb2>;
-	status = "okay";
-};
-
-&usb3_peri0 {
-	companion = <&xhci0>;
-	status = "okay";
-};
-
-&vin4 {
-	status = "okay";
-};
-
-&vin5 {
-	status = "okay";
-};
-
-&xhci0 {
-	pinctrl-0 = <&usb30_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
 };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 05/29] arm64: dts: renesas: Add Renesas R8A779M0 SoC support
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (3 preceding siblings ...)
  2021-08-12 11:23 ` [PATCH v2 04/29] arm64: dts: renesas: Factor out Ebisu " Geert Uytterhoeven
@ 2021-08-12 11:23 ` Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 06/29] arm64: dts: renesas: Add Renesas R8A779M2 " Geert Uytterhoeven
                   ` (23 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

Add support for the Renesas R-Car H3e (R8A779M0) SoC, which is a
different grading of the R-Car H3 ES3.0 (R8A77951) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 arch/arm64/boot/dts/renesas/r8a779m0.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m0.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779m0.dtsi b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi
new file mode 100644
index 0000000000000000..6fb1979cc0414abf
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m0.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car H3e (R8A779M0) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m0", "renesas,r8a7795";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 06/29] arm64: dts: renesas: Add Renesas R8A779M2 SoC support
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (4 preceding siblings ...)
  2021-08-12 11:23 ` [PATCH v2 05/29] arm64: dts: renesas: Add Renesas R8A779M0 SoC support Geert Uytterhoeven
@ 2021-08-12 11:23 ` Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 07/29] arm64: dts: renesas: Add Renesas R8A779M4 " Geert Uytterhoeven
                   ` (22 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

Add support for the Renesas R-Car M3e (R8A779M2) SoC, which is a
different grading of the R-Car M3-W+ (R8A77961) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 arch/arm64/boot/dts/renesas/r8a779m2.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m2.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779m2.dtsi b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi
new file mode 100644
index 0000000000000000..324627340b86ad9e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m2.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car M3e (R8A779M2) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77961.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m2", "renesas,r8a77961";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 07/29] arm64: dts: renesas: Add Renesas R8A779M4 SoC support
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (5 preceding siblings ...)
  2021-08-12 11:23 ` [PATCH v2 06/29] arm64: dts: renesas: Add Renesas R8A779M2 " Geert Uytterhoeven
@ 2021-08-12 11:23 ` Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 08/29] arm64: dts: renesas: Add Renesas R8A779M5 " Geert Uytterhoeven
                   ` (21 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

Add support for the Renesas R-Car M3Ne (R8A779M4) SoC, which is a
different grading of the R-Car M3-N (R8A77965) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 arch/arm64/boot/dts/renesas/r8a779m4.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m4.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779m4.dtsi b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi
new file mode 100644
index 0000000000000000..d7fbb6c05502678c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m4.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car M3Ne (R8A779M4) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77965.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m4", "renesas,r8a77965";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 08/29] arm64: dts: renesas: Add Renesas R8A779M5 SoC support
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (6 preceding siblings ...)
  2021-08-12 11:23 ` [PATCH v2 07/29] arm64: dts: renesas: Add Renesas R8A779M4 " Geert Uytterhoeven
@ 2021-08-12 11:23 ` Geert Uytterhoeven
  2021-08-12 11:23 ` [PATCH v2 09/29] arm64: dts: renesas: Add Renesas R8A779M6 " Geert Uytterhoeven
                   ` (20 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

Add support for the Renesas R-Car M3Ne-2G (R8A779M5) SoC, which is a
different grading of the R-Car M3-N (R8A77965) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 arch/arm64/boot/dts/renesas/r8a779m5.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m5.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
new file mode 100644
index 0000000000000000..f0ef765f6cf87319
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car M3Ne-2G (R8A779M5) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77965.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m5", "renesas,r8a77965";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 09/29] arm64: dts: renesas: Add Renesas R8A779M6 SoC support
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (7 preceding siblings ...)
  2021-08-12 11:23 ` [PATCH v2 08/29] arm64: dts: renesas: Add Renesas R8A779M5 " Geert Uytterhoeven
@ 2021-08-12 11:23 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 10/29] arm64: dts: renesas: Add Renesas R8A779M7 " Geert Uytterhoeven
                   ` (19 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:23 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

Add support for the Renesas R-Car E3e (R8A779M6) SoC, which is a
different grading of the R-Car E3 (R8A77990) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 arch/arm64/boot/dts/renesas/r8a779m6.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m6.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779m6.dtsi b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi
new file mode 100644
index 0000000000000000..afe3cabfb898c6e6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m6.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car E3e (R8A779M6) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77990.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m6", "renesas,r8a77990";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 10/29] arm64: dts: renesas: Add Renesas R8A779M7 SoC support
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (8 preceding siblings ...)
  2021-08-12 11:23 ` [PATCH v2 09/29] arm64: dts: renesas: Add Renesas R8A779M6 " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 11/29] arm64: dts: renesas: Add Renesas R8A779M8 " Geert Uytterhoeven
                   ` (18 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

Add support for the Renesas R-Car D3e (R8A779M7) SoC, which is a
different grading of the R-Car D3 (R8A77995) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 arch/arm64/boot/dts/renesas/r8a779m7.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m7.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779m7.dtsi b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi
new file mode 100644
index 0000000000000000..4958babc52fd81ea
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m7.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car D3e (R8A779M7) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77995.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m7", "renesas,r8a77995";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 11/29] arm64: dts: renesas: Add Renesas R8A779M8 SoC support
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (9 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 10/29] arm64: dts: renesas: Add Renesas R8A779M7 " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 12/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e Geert Uytterhoeven
                   ` (17 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

Add support for the Renesas R-Car H3Ne (R8A779M8) SoC, which is a
different grading of the R-Car H3-N (R8A77951) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - No changes.
---
 arch/arm64/boot/dts/renesas/r8a779m8.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m8.dtsi

diff --git a/arch/arm64/boot/dts/renesas/r8a779m8.dtsi b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi
new file mode 100644
index 0000000000000000..752440b0c40f7c22
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m8.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the R-Car H3Ne (R8A779M8) SoC
+ *
+ * Copyright (C) 2021 Glider bv
+ */
+
+#include "r8a77951.dtsi"
+
+/ {
+	compatible = "renesas,r8a779m8", "renesas,r8a7795";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 12/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (10 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 11/29] arm64: dts: renesas: Add Renesas R8A779M8 " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 13/29] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven
                   ` (16 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas Salvator-X 2nd version development
board equipped with an R-Car H3e SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 +
 .../boot/dts/renesas/r8a779m0-salvator-xs.dts | 53 +++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m0-salvator-xs.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 15a53b5139669aa6..69bdf8e92a459f1f 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -63,6 +63,8 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
 
 dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m0-salvator-xs.dtb
+
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m0-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m0-salvator-xs.dts
new file mode 100644
index 0000000000000000..571c5e42240a6308
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m0-salvator-xs.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3e
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-salvator-xs.dts
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m0.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m0";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m0",
+		     "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 13/29] arm64: dts: renesas: Add support for H3ULCB with R-Car H3e
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (11 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 12/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 14/29] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven
                   ` (15 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Premier equipped with an
R-Car H3e SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 arch/arm64/boot/dts/renesas/r8a779m0-ulcb.dts | 53 +++++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m0-ulcb.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 69bdf8e92a459f1f..a18f9b9d2a335c78 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -64,6 +64,7 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
 dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m0-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m0-ulcb.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m0-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m0-ulcb.dts
new file mode 100644
index 0000000000000000..57ae7866582f9a41
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m0-ulcb.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car H3e
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb.dts
+ * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a779m0.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas H3ULCB board based on r8a779m0";
+	compatible = "renesas,h3ulcb", "renesas,r8a779m0", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 4>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 14/29] arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3e
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (12 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 13/29] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 15/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e Geert Uytterhoeven
                   ` (14 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Premier and Kingfisher
combo equipped with an R-Car H3e SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 .../boot/dts/renesas/r8a779m0-ulcb-kf.dts     | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m0-ulcb-kf.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index a18f9b9d2a335c78..5b31402f8579b19b 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m0-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m0-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m0-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m0-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m0-ulcb-kf.dts
new file mode 100644
index 0000000000000000..76c40d63cf95f1b3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m0-ulcb-kf.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3e
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb-kf.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a779m0-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas H3ULCB Kingfisher board based on r8a779m0";
+	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
+		     "renesas,r8a779m0", "renesas,r8a7795";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 15/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (13 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 14/29] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 16/29] arm64: dts: renesas: Add support for M3ULCB " Geert Uytterhoeven
                   ` (13 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas Salvator-X 2nd version development
board equipped with an R-Car M3e SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 +
 .../boot/dts/renesas/r8a779m2-salvator-xs.dts | 46 +++++++++++++++++++
 2 files changed, 48 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m2-salvator-xs.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 5b31402f8579b19b..2c542b2f1c9fe092 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -71,6 +71,8 @@ dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
 
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m2-salvator-xs.dtb
+
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m2-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m2-salvator-xs.dts
new file mode 100644
index 0000000000000000..27b114efef9d417d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m2-salvator-xs.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-salvator-xs.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m2.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m2";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m2",
+		     "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 16/29] arm64: dts: renesas: Add support for M3ULCB with R-Car M3e
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (14 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 15/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 17/29] arm64: dts: renesas: Add support for M3ULCB+Kingfisher " Geert Uytterhoeven
                   ` (12 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Pro equipped with an R-Car
M3e SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 arch/arm64/boot/dts/renesas/r8a779m2-ulcb.dts | 45 +++++++++++++++++++
 2 files changed, 46 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m2-ulcb.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 2c542b2f1c9fe092..eb744f7876751699 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m2-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m2-ulcb.dtb
 
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m2-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m2-ulcb.dts
new file mode 100644
index 0000000000000000..22edd2476ec40f28
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m2-ulcb.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) with R-Car M3e
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb.dts
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m2.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3ULCB board based on r8a779m2";
+	compatible = "renesas,m3ulcb", "renesas,r8a779m2", "renesas,r8a77961";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x1 0x00000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 17/29] arm64: dts: renesas: Add support for M3ULCB+Kingfisher with R-Car M3e
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (15 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 16/29] arm64: dts: renesas: Add support for M3ULCB " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 18/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne Geert Uytterhoeven
                   ` (11 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Pro and Kingfisher combo
equipped with an R-Car M3e SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile           |  1 +
 .../boot/dts/renesas/r8a779m2-ulcb-kf.dts      | 18 ++++++++++++++++++
 2 files changed, 19 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m2-ulcb-kf.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index eb744f7876751699..b55314feb8abdf98 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m2-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m2-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77961) += r8a779m2-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m2-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m2-ulcb-kf.dts
new file mode 100644
index 0000000000000000..27c642553860fdf8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m2-ulcb-kf.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board with R-Car M3e
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77961-ulcb-kf.dts
+ * Copyright (C) 2020 Eugeniu Rosca <rosca.eugeniu@gmail.com>
+ */
+
+#include "r8a779m2-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3ULCB Kingfisher board based on r8a779m2";
+	compatible = "shimafuji,kingfisher", "renesas,m3ulcb",
+		     "renesas,r8a779m2", "renesas,r8a77961";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 18/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (16 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 17/29] arm64: dts: renesas: Add support for M3ULCB+Kingfisher " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 19/29] arm64: dts: renesas: Add support for M3NULCB " Geert Uytterhoeven
                   ` (10 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas Salvator-X 2nd version development board
equipped with an R-Car M3Ne SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 ++
 .../boot/dts/renesas/r8a779m4-salvator-xs.dts | 36 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m4-salvator-xs.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index b55314feb8abdf98..2ab938d4b62c1317 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -79,4 +79,6 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
 
+dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-salvator-xs.dtb
+
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m4-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m4-salvator-xs.dts
new file mode 100644
index 0000000000000000..3a283b3ec116f9ca
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m4-salvator-xs.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3Ne
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77965-salvator-xs.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m4.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m4";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m4",
+		     "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 19/29] arm64: dts: renesas: Add support for M3NULCB with R-Car M3Ne
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (17 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 18/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 20/29] arm64: dts: renesas: Add support for M3NULCB+Kingfisher " Geert Uytterhoeven
                   ` (9 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Pro equipped with an R-Car
M3Ne SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 arch/arm64/boot/dts/renesas/r8a779m4-ulcb.dts | 36 +++++++++++++++++++
 2 files changed, 37 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m4-ulcb.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 2ab938d4b62c1317..45a004035e216c14 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -80,5 +80,6 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-ulcb.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m4-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m4-ulcb.dts
new file mode 100644
index 0000000000000000..632f1c72ad8fe6e0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m4-ulcb.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) with R-Car M3Ne
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77965-ulcb.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a779m4.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3NULCB board based on r8a779m4";
+	compatible = "renesas,m3nulcb", "renesas,r8a779m4", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 20/29] arm64: dts: renesas: Add support for M3NULCB+Kingfisher with R-Car M3Ne
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (18 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 19/29] arm64: dts: renesas: Add support for M3NULCB " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 21/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne-2G Geert Uytterhoeven
                   ` (8 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Pro and Kingfisher combo
equipped with an R-Car M3Ne SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 .../boot/dts/renesas/r8a779m4-ulcb-kf.dts     | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m4-ulcb-kf.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 45a004035e216c14..2f82cb497ba66a86 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -81,5 +81,6 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m4-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m4-ulcb-kf.dts
new file mode 100644
index 0000000000000000..dd9d97bb2f4edcaf
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m4-ulcb-kf.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3NULCB Kingfisher board with R-Car M3Ne
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77965-ulcb-kf.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include "r8a779m4-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3NULCB Kingfisher board based on r8a779m4";
+	compatible = "shimafuji,kingfisher", "renesas,m3nulcb",
+		     "renesas,r8a779m4", "renesas,r8a77965";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 21/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne-2G
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (19 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 20/29] arm64: dts: renesas: Add support for M3NULCB+Kingfisher " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 22/29] arm64: dts: renesas: Add support for M3NULCB " Geert Uytterhoeven
                   ` (7 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas Salvator-X 2nd version development board
equipped with an R-Car M3Ne-2G SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 ++
 .../boot/dts/renesas/r8a779m5-salvator-xs.dts | 36 +++++++++++++++++++
 2 files changed, 38 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 2f82cb497ba66a86..5c47615525fc9203 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -83,4 +83,6 @@ dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-ulcb-kf.dtb
 
+dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
+
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts
new file mode 100644
index 0000000000000000..c0341a88d641c837
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car M3Ne-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77965-salvator-xs.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m5.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m5";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m5",
+		     "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 22/29] arm64: dts: renesas: Add support for M3NULCB with R-Car M3Ne-2G
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (20 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 21/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne-2G Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 23/29] arm64: dts: renesas: Add support for M3NULCB+Kingfisher " Geert Uytterhoeven
                   ` (6 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Pro equipped with an R-Car
M3Ne-2 SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 arch/arm64/boot/dts/renesas/r8a779m5-ulcb.dts | 36 +++++++++++++++++++
 2 files changed, 37 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m5-ulcb.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 5c47615525fc9203..9bee0eab5e2c2577 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -84,5 +84,6 @@ dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-ulcb.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m5-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m5-ulcb.dts
new file mode 100644
index 0000000000000000..17242ec02a65ad93
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m5-ulcb.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) with R-Car M3Ne-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77965-ulcb.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a779m5.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas M3NULCB board based on r8a779m5";
+	compatible = "renesas,m3nulcb", "renesas,r8a779m5", "renesas,r8a77965";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 23/29] arm64: dts: renesas: Add support for M3NULCB+Kingfisher with R-Car M3Ne-2G
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (21 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 22/29] arm64: dts: renesas: Add support for M3NULCB " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 24/29] arm64: dts: renesas: Add support for Ebisu with R-Car E3e Geert Uytterhoeven
                   ` (5 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Pro and Kingfisher combo
equipped with an R-Car M3Ne-2G SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 .../boot/dts/renesas/r8a779m5-ulcb-kf.dts     | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m5-ulcb-kf.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 9bee0eab5e2c2577..13446aecdfccb080 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -85,5 +85,6 @@ dtb-$(CONFIG_ARCH_R8A77965) += r8a779m4-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m5-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m5-ulcb-kf.dts
new file mode 100644
index 0000000000000000..79ccf581be1bf5ad
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m5-ulcb-kf.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the M3NULCB Kingfisher board with R-Car M3Ne-2G
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77965-ulcb-kf.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include "r8a779m5-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas M3NULCB Kingfisher board based on r8a779m5";
+	compatible = "shimafuji,kingfisher", "renesas,m3nulcb",
+		     "renesas,r8a779m5", "renesas,r8a77965";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 24/29] arm64: dts: renesas: Add support for Ebisu with R-Car E3e
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (22 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 23/29] arm64: dts: renesas: Add support for M3NULCB+Kingfisher " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 25/29] arm64: dts: renesas: Add support for Draak with R-Car D3e Geert Uytterhoeven
                   ` (4 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas Ebisu development board equipped with an
R-Car E3e SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile           |  2 ++
 arch/arm64/boot/dts/renesas/r8a779m6-ebisu.dts | 18 ++++++++++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m6-ebisu.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 13446aecdfccb080..c28c36efa10021c5 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -87,4 +87,6 @@ dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-ulcb-kf.dtb
 
+dtb-$(CONFIG_ARCH_R8A77990) += r8a779m6-ebisu.dtb
+
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m6-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a779m6-ebisu.dts
new file mode 100644
index 0000000000000000..baff1f823546d85e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m6-ebisu.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Ebisu board with R-Car E3e
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77990-ebisu.dts
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m6.dtsi"
+#include "ebisu.dtsi"
+
+/ {
+	model = "Renesas Ebisu board based on r8a779m6";
+	compatible = "renesas,ebisu", "renesas,r8a779m6", "renesas,r8a77990";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 25/29] arm64: dts: renesas: Add support for Draak with R-Car D3e
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (23 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 24/29] arm64: dts: renesas: Add support for Ebisu with R-Car E3e Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 26/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3Ne Geert Uytterhoeven
                   ` (3 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas Draak development board equipped with an
R-Car D3e SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 ++
 .../arm64/boot/dts/renesas/r8a779m7-draak.dts | 19 +++++++++++++++++++
 2 files changed, 21 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m7-draak.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index c28c36efa10021c5..6c2810d39f5a7871 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -89,4 +89,6 @@ dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77990) += r8a779m6-ebisu.dtb
 
+dtb-$(CONFIG_ARCH_R8A77995) += r8a779m7-draak.dtb
+
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m7-draak.dts b/arch/arm64/boot/dts/renesas/r8a779m7-draak.dts
new file mode 100644
index 0000000000000000..cf9005b32aeb8344
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m7-draak.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Draak board with R-Car D3e
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77995-draak.dts
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
+ * Copyright (C) 2017 Glider bvba
+ */
+
+/dts-v1/;
+#include "r8a779m7.dtsi"
+#include "draak.dtsi"
+
+/ {
+	model = "Renesas Draak board based on r8a779m7";
+	compatible = "renesas,draak", "renesas,r8a779m7", "renesas,r8a77995";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 26/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3Ne
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (24 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 25/29] arm64: dts: renesas: Add support for Draak with R-Car D3e Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 27/29] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven
                   ` (2 subsequent siblings)
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas Salvator-X 2nd version development
board equipped with an R-Car H3Ne SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  2 +
 .../boot/dts/renesas/r8a779m8-salvator-xs.dts | 53 +++++++++++++++++++
 2 files changed, 55 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m8-salvator-xs.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 6c2810d39f5a7871..a14642a9e45a2a4b 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -91,4 +91,6 @@ dtb-$(CONFIG_ARCH_R8A77990) += r8a779m6-ebisu.dtb
 
 dtb-$(CONFIG_ARCH_R8A77995) += r8a779m7-draak.dtb
 
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m8-salvator-xs.dtb
+
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m8-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m8-salvator-xs.dts
new file mode 100644
index 0000000000000000..ddb0edb03db4e30c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m8-salvator-xs.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the Salvator-X 2nd version board with R-Car H3Ne
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-salvator-xs.dts
+ * Copyright (C) 2015-2017 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779m8.dtsi"
+#include "salvator-xs.dtsi"
+
+/ {
+	model = "Renesas Salvator-X 2nd version board based on r8a779m8";
+	compatible = "renesas,salvator-xs", "renesas,r8a779m8",
+		     "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock6 1>,
+		 <&x21_clk>,
+		 <&x22_clk>,
+		 <&versaclock6 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 27/29] arm64: dts: renesas: Add support for H3ULCB with R-Car H3Ne
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (25 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 26/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3Ne Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 28/29] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 29/29] [RFC] arm64: dts: renesas: r8a779m5: Add Cortex-A57 2 GHz opp Geert Uytterhoeven
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Premier equipped with an
R-Car H3Ne SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 arch/arm64/boot/dts/renesas/r8a779m8-ulcb.dts | 52 +++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m8-ulcb.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index a14642a9e45a2a4b..c7d2b91a833b00b8 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -92,5 +92,6 @@ dtb-$(CONFIG_ARCH_R8A77990) += r8a779m6-ebisu.dtb
 dtb-$(CONFIG_ARCH_R8A77995) += r8a779m7-draak.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m8-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m8-ulcb.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m8-ulcb.dts b/arch/arm64/boot/dts/renesas/r8a779m8-ulcb.dts
new file mode 100644
index 0000000000000000..d91ae596a6bf1f02
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m8-ulcb.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) with R-Car H3Ne
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb.dts
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a779m8.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+	model = "Renesas H3ULCB board based on r8a779m8";
+	compatible = "renesas,h3ulcb", "renesas,r8a779m8", "renesas,r8a7795";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x40000000>;
+	};
+
+	memory@700000000 {
+		device_type = "memory";
+		reg = <0x7 0x00000000 0x0 0x40000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&versaclock5 3>,
+		 <&versaclock5 4>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 28/29] arm64: dts: renesas: Add support for H3ULCB+Kingfisher with R-Car H3Ne
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (26 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 27/29] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  2021-08-12 11:24 ` [PATCH v2 29/29] [RFC] arm64: dts: renesas: r8a779m5: Add Cortex-A57 2 GHz opp Geert Uytterhoeven
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree,
	Geert Uytterhoeven, Laurent Pinchart

Add support for the Renesas R-Car Starter Kit Premier and Kingfisher
combo equipped with an R-Car H3Ne SiP.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v2:
  - Add Reviewed-by.
---
 arch/arm64/boot/dts/renesas/Makefile          |  1 +
 .../boot/dts/renesas/r8a779m8-ulcb-kf.dts     | 19 +++++++++++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779m8-ulcb-kf.dts

diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index c7d2b91a833b00b8..498f1c4a3b271b93 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -93,5 +93,6 @@ dtb-$(CONFIG_ARCH_R8A77995) += r8a779m7-draak.dtb
 
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m8-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77951) += r8a779m8-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a779m8-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a779m8-ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a779m8-ulcb-kf.dts
new file mode 100644
index 0000000000000000..3a2c80fb1a3d271f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779m8-ulcb-kf.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board with R-Car H3Ne
+ *
+ * Copyright (C) 2021 Glider bv
+ *
+ * Based on r8a77951-ulcb-kf.dts
+ * Copyright (C) 2017 Renesas Electronics Corp.
+ * Copyright (C) 2017 Cogent Embedded, Inc.
+ */
+
+#include "r8a779m8-ulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+	model = "Renesas H3ULCB Kingfisher board based on r8a779m8";
+	compatible = "shimafuji,kingfisher", "renesas,h3ulcb",
+		     "renesas,r8a779m8", "renesas,r8a7795";
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* [PATCH v2 29/29] [RFC] arm64: dts: renesas: r8a779m5: Add Cortex-A57 2 GHz opp
  2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
                   ` (27 preceding siblings ...)
  2021-08-12 11:24 ` [PATCH v2 28/29] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven
@ 2021-08-12 11:24 ` Geert Uytterhoeven
  28 siblings, 0 replies; 31+ messages in thread
From: Geert Uytterhoeven @ 2021-08-12 11:24 UTC (permalink / raw)
  To: Magnus Damm, Rob Herring
  Cc: linux-renesas-soc, linux-arm-kernel, devicetree, Geert Uytterhoeven

Add a preliminary operating point for running the Cortex-A57 CPU cores
on R-Car M3Ne-2G at 2 GHz.

The opp-microvolt value depends on a future update of the Electrical
Characteristics for R-Car M3Ne-2G.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - Change 2 GHz opp from 1020000 µV to 960000 µV, as per informal
    communication.
---
 arch/arm64/boot/dts/renesas/r8a779m5.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
index f0ef765f6cf87319..5ab9bbdd419be3cd 100644
--- a/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779m5.dtsi
@@ -10,3 +10,12 @@
 / {
 	compatible = "renesas,r8a779m5", "renesas,r8a77965";
 };
+
+&cluster0_opp {
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <960000>;	// FIXME TBC
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 31+ messages in thread

* Re: [PATCH v2 01/29] dt-bindings: arm: renesas: Document more R-Car Gen3e Socs and boards
  2021-08-12 11:23 ` [PATCH v2 01/29] dt-bindings: arm: renesas: Document more R-Car Gen3e Socs " Geert Uytterhoeven
@ 2021-08-17 21:30   ` Rob Herring
  0 siblings, 0 replies; 31+ messages in thread
From: Rob Herring @ 2021-08-17 21:30 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: linux-renesas-soc, Laurent Pinchart, Magnus Damm,
	linux-arm-kernel, devicetree, Rob Herring

On Thu, 12 Aug 2021 13:23:51 +0200, Geert Uytterhoeven wrote:
> Document the compatible values for the remaining R-Car Gen3e SoCs: R-Car
> H3e (R8A779M0), M3e (R8A779M2), M3Ne (R8A779M4), M3Ne-2G (R8A779M5), E3e
> (R8A779M6), D3e (R8A779M7), and H3Ne (R8A779M8).  These are different
> gradings of R-Car Gen3 SoCs.
> 
> All R-Car Gen3e on-SoC devices are identical to the devices on the
> corresponding R-Car Gen3 SoCs, and thus just use the compatible values
> for the latter.  The root compatible properties do gain an additional
> value, to sort out integration issues if they ever arise.
> 
> Document the use of these SoCs on the Salvator-XS, ULCB (with and
> without Kingfisher extension), Ebisu, and Draak development boards.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> v2:
>   - Typo s/R8A779M/R8A779M0/,
>   - Add Reviewed-by.
> ---
>  .../devicetree/bindings/arm/renesas.yaml      | 61 +++++++++++++++++++
>  1 file changed, 61 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 31+ messages in thread

end of thread, other threads:[~2021-08-17 21:32 UTC | newest]

Thread overview: 31+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-12 11:23 [PATCH v2 00/29] arm64: renesas: Add support for more R-Car Gen3e SoCs and boards Geert Uytterhoeven
2021-08-12 11:23 ` [PATCH v2 01/29] dt-bindings: arm: renesas: Document more R-Car Gen3e Socs " Geert Uytterhoeven
2021-08-17 21:30   ` Rob Herring
2021-08-12 11:23 ` [PATCH v2 02/29] soc: renesas: Identify more R-Car Gen3e SoCs Geert Uytterhoeven
2021-08-12 11:23 ` [PATCH v2 03/29] arm64: dts: renesas: Factor out Draak board support Geert Uytterhoeven
2021-08-12 11:23 ` [PATCH v2 04/29] arm64: dts: renesas: Factor out Ebisu " Geert Uytterhoeven
2021-08-12 11:23 ` [PATCH v2 05/29] arm64: dts: renesas: Add Renesas R8A779M0 SoC support Geert Uytterhoeven
2021-08-12 11:23 ` [PATCH v2 06/29] arm64: dts: renesas: Add Renesas R8A779M2 " Geert Uytterhoeven
2021-08-12 11:23 ` [PATCH v2 07/29] arm64: dts: renesas: Add Renesas R8A779M4 " Geert Uytterhoeven
2021-08-12 11:23 ` [PATCH v2 08/29] arm64: dts: renesas: Add Renesas R8A779M5 " Geert Uytterhoeven
2021-08-12 11:23 ` [PATCH v2 09/29] arm64: dts: renesas: Add Renesas R8A779M6 " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 10/29] arm64: dts: renesas: Add Renesas R8A779M7 " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 11/29] arm64: dts: renesas: Add Renesas R8A779M8 " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 12/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3e Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 13/29] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 14/29] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 15/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3e Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 16/29] arm64: dts: renesas: Add support for M3ULCB " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 17/29] arm64: dts: renesas: Add support for M3ULCB+Kingfisher " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 18/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 19/29] arm64: dts: renesas: Add support for M3NULCB " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 20/29] arm64: dts: renesas: Add support for M3NULCB+Kingfisher " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 21/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3Ne-2G Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 22/29] arm64: dts: renesas: Add support for M3NULCB " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 23/29] arm64: dts: renesas: Add support for M3NULCB+Kingfisher " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 24/29] arm64: dts: renesas: Add support for Ebisu with R-Car E3e Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 25/29] arm64: dts: renesas: Add support for Draak with R-Car D3e Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 26/29] arm64: dts: renesas: Add support for Salvator-XS with R-Car H3Ne Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 27/29] arm64: dts: renesas: Add support for H3ULCB " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 28/29] arm64: dts: renesas: Add support for H3ULCB+Kingfisher " Geert Uytterhoeven
2021-08-12 11:24 ` [PATCH v2 29/29] [RFC] arm64: dts: renesas: r8a779m5: Add Cortex-A57 2 GHz opp Geert Uytterhoeven

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).