linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Frieder Schrempf <frieder.schrempf@kontron.de>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>,
	robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	p.zabel@pengutronix.de, l.stach@pengutronix.de, krzk@kernel.org,
	agx@sigxcpu.org, marex@denx.de, andrew.smirnov@gmail.com,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, ping.bai@nxp.com,
	aford173@gmail.com, abel.vesa@nxp.com,
	Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V2 0/4] soc: imx: add i.MX BLK-CTL support
Date: Tue, 4 May 2021 10:55:03 +0200	[thread overview]
Message-ID: <2f0300ba-2465-b379-6824-6b66cfad1c59@kontron.de> (raw)
In-Reply-To: <ae7630e5-af69-3504-2298-23e432308ce6@kontron.de>

On 03.05.21 16:57, Frieder Schrempf wrote:
> Hi Peng,
> 
> On 30.04.21 07:27, Peng Fan (OSS) wrote:
>> From: Peng Fan <peng.fan@nxp.com>
>>
>> V2:
>>   Fix yaml check failure
>>
>> Previously there is an effort from Abel that take BLK-CTL as clock
>> provider, but it turns out that there is A/B lock issue and we are
>> not able resolve that.
>>
>> Per discuss with Lucas and Jacky, we made an agreement that take BLK-CTL
>> as a power domain provider and use GPC's domain as parent, the consumer
>> node take BLK-CTL as power domain input.
>>
>> This patchset has been tested on i.MX8MM EVK board, but one hack
>> is not included in the patchset is that the DISPMIX BLK-CTL 
>> MIPI_M/S_RESET
>> not implemented. Per Lucas, we will finally have a MIPI DPHY driver,
>> so fine to leave it.
> 
> Thanks for your work. I would like to test this together with the DSIM 
> and PHY driver by Michael and Marek. So far the boot hangs when probing 
> the DSIM, but I'm not even sure if my DT is correct.
> 
> With the DSIM PHY driver (see [1]) in place, the GPR_MIPI_M_RESETN 
> should be set correctly, right?

So I found out, that with the hack below applied (taken from Marek's WIP 
patches for DSIM support) it seems to work properly.

Therefore I guess this is an issue with the DSIM driver, that somehow 
needs to make sure that the proper clocks are enabled at probe time.

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 04564017bfe9..5a9bca805b0c 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -9,6 +9,7 @@
   */

  #include <linux/clk.h>
+#include <linux/clk-provider.h>
  #include <linux/of_device.h>
  #include <linux/platform_device.h>
  #include <linux/pm_domain.h>
@@ -193,6 +194,7 @@ to_imx_pgc_domain(struct generic_pm_domain *genpd)
  static int imx_pgc_power_up(struct generic_pm_domain *genpd)
  {
         struct imx_pgc_domain *domain = to_imx_pgc_domain(genpd);
+       unsigned int i;
         u32 reg_val;
         int ret;

@@ -254,7 +256,14 @@ static int imx_pgc_power_up(struct 
generic_pm_domain *genpd)
         }

         /* Disable reset clocks for all devices in the domain */
-       clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+       //clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
+       for (i = 0; i < domain->num_clks; i++) {
+               /* Keep the DISPMIX active, it is needed by both LCDIF 
and MIPI */
+               if (strcmp(__clk_get_name(domain->clks[i].clk), 
"disp_root_clk") &&
+                   strcmp(__clk_get_name(domain->clks[i].clk), 
"disp_axi_root_clk") &&
+                   strcmp(__clk_get_name(domain->clks[i].clk), 
"disp_apb_root_clk"))
+                       clk_disable_unprepare(domain->clks[i].clk);
+       }

         return 0;


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

      reply	other threads:[~2021-05-04  8:57 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-30  5:27 [PATCH V2 0/4] soc: imx: add i.MX BLK-CTL support Peng Fan (OSS)
2021-04-30  5:27 ` [PATCH V2 1/4] dt-bindings: power: Add defines for i.MX8MM BLK-CTL power domains Peng Fan (OSS)
2021-04-30  5:27 ` [PATCH V2 2/4] Documentation: bindings: clk: Add bindings for i.MX BLK_CTL Peng Fan (OSS)
2021-05-05 23:08   ` Rob Herring
2021-05-06  0:50     ` Peng Fan (OSS)
2021-04-30  5:27 ` [PATCH V2 3/4] soc: imx: Add generic blk-ctl driver Peng Fan (OSS)
2021-05-04  9:47   ` Lucas Stach
2021-05-04 10:30     ` Peng Fan (OSS)
2021-05-04 10:16   ` Frieder Schrempf
2021-05-04 11:22     ` Peng Fan (OSS)
2021-05-06  7:55       ` Frieder Schrempf
2021-04-30  5:27 ` [PATCH V2 4/4] soc: imx: Add blk-ctl driver for i.MX8MM Peng Fan (OSS)
2021-05-04 10:25   ` Frieder Schrempf
2021-05-04 11:13   ` Fabio Estevam
2021-05-04 11:22     ` Peng Fan
2021-04-30  6:19 ` [PATCH V2 0/4] soc: imx: add i.MX BLK-CTL support Peng Fan
2021-05-03 14:57 ` Frieder Schrempf
2021-05-04  8:55   ` Frieder Schrempf [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2f0300ba-2465-b379-6824-6b66cfad1c59@kontron.de \
    --to=frieder.schrempf@kontron.de \
    --cc=abel.vesa@nxp.com \
    --cc=aford173@gmail.com \
    --cc=agx@sigxcpu.org \
    --cc=andrew.smirnov@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzk@kernel.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=p.zabel@pengutronix.de \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=ping.bai@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).