archive mirror
 help / color / mirror / Atom feed
From: Marcel Ziswiler <>
To: ""
	"" <>
Cc: ""
Subject: Re: boot fail imx6q-apalis-ixora-v1.1 with imx_v6_v7_defconfig
Date: Tue, 18 May 2021 20:43:53 +0000	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <>

Hi Nobuhiro

On Tue, 2021-05-18 at 15:25 +0900, Nobuhiro Iwamatsu wrote:
> Hi,
> I'm using imx6q-apalis-ixora [0][1] and noticed that the kernel built with imx_v6_v7_defconfig[2]
> does not boot. Nothing is displayed after "Starting kernel" when booting from the boot loader.
> Do you know if there is a problem in other boards?

I am not aware of any such issue.

As a matter of fact, I just tried today's linux-next with your exact configuration and it works for me without
any issue (well, at least it boots fine). See console log [3].

> I used git bisect to look for problematic commits. The result is as follows.
> [c8fa942bd3fbd5b05351aff04649064f5d59f0d2] arm64: defconfig: Build in CONFIG_GPIO_MXC by default
> It boots by removing CONFIG_GPIO_MXC, but this setting seems to be another problem as it is required
> not only for this hardware, but also for the i.MX series with armv6 and 7.

As mentioned above, that does not ring any bell.

> Do you have a information about this issue?

No, sorry.

> Best regards,
>   Nobuhiro
> [0]:
> [1]: 
> [2]: 



linux-arm-kernel mailing list

  reply	other threads:[~2021-05-18 20:45 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-18  6:25 boot fail imx6q-apalis-ixora-v1.1 with imx_v6_v7_defconfig Nobuhiro Iwamatsu
2021-05-18 20:43 ` Marcel Ziswiler [this message]
2021-05-20  1:21   ` Nobuhiro Iwamatsu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).