From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-17.4 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 05746C4338F for ; Thu, 12 Aug 2021 11:32:41 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id B6B6160E9B for ; Thu, 12 Aug 2021 11:32:40 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 mail.kernel.org B6B6160E9B Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=glider.be Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender: Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:Cc:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=dl5APcJYMnYbZiXhPE7GuhgOxWJisCytFLWH3XzKp9Y=; b=PHkVLW9u6ppo6q cfXompiY5fZ3dRhA54BO3jCh6YN8JMELKDRJkW7v1g68z774B3S7HXAqf2G9vcofoRfF/mAHCKGj3 ieF3YT2hkB6umNh28whc08tF2W5K08f2IXuKXF6asI6ZGQ+Fu8vuhRZdvvouSg+S+9uJaMSk8H/ZL fdtB6+K8YlQMLi9Jexu/RciKJk4c/UXiRJzfgOhW74hbxBPfDMlioQpqMIdDD4EAYmtDLWY0E9Y5X db+dmOJ7jgwyxG0PABltUYL89oN9+6Kpb1JwUdDqKRJ/Tu+w8in6MBqHymMNEUnOyksvg5TGZA2ZY +zk9gDYQO+deKesMpTaA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux)) id 1mE8uS-009ncl-L5; Thu, 12 Aug 2021 11:30:05 +0000 Received: from andre.telenet-ops.be ([2a02:1800:120:4::f00:15]) by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux)) id 1mE8p5-009l2S-6i for linux-arm-kernel@lists.infradead.org; Thu, 12 Aug 2021 11:24:39 +0000 Received: from ramsan.of.borg ([IPv6:2a02:1810:ac12:ed20:438:1ff1:1071:f524]) by andre.telenet-ops.be with bizsmtp id gbQQ2500i1gJxCh01bQQYS; Thu, 12 Aug 2021 13:24:24 +0200 Received: from rox.of.borg ([192.168.97.57]) by ramsan.of.borg with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.93) (envelope-from ) id 1mE8oy-002Fin-2Y; Thu, 12 Aug 2021 13:24:24 +0200 Received: from geert by rox.of.borg with local (Exim 4.93) (envelope-from ) id 1mE8ox-007432-I5; Thu, 12 Aug 2021 13:24:23 +0200 From: Geert Uytterhoeven To: Magnus Damm , Rob Herring Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven , Laurent Pinchart Subject: [PATCH v2 03/29] arm64: dts: renesas: Factor out Draak board support Date: Thu, 12 Aug 2021 13:23:53 +0200 Message-Id: <32618abb48004793f2e030d29b3a038edc05f136.1628766192.git.geert+renesas@glider.be> X-Mailer: git-send-email 2.25.1 In-Reply-To: References: MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20210812_042431_656118_C284AA4B X-CRM114-Status: GOOD ( 17.47 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org Move the common parts for the Renesas Draak board to draak.dtsi, to avoid future duplication of board descriptions. Change a reference in a comment from "r8a77995" to "R-Car D3(e)", to prepare for the advent of "R-Car D3e". Signed-off-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart --- v2: - Drop bogus "based" in model name, - Replace "D3" by "D3(e)", - Add Reviewed-by, - Rebased. --- .../{r8a77995-draak.dts => draak.dtsi} | 10 +- .../arm64/boot/dts/renesas/r8a77995-draak.dts | 671 +----------------- 2 files changed, 5 insertions(+), 676 deletions(-) copy arch/arm64/boot/dts/renesas/{r8a77995-draak.dts => draak.dtsi} (97%) diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/draak.dtsi similarity index 97% copy from arch/arm64/boot/dts/renesas/r8a77995-draak.dts copy to arch/arm64/boot/dts/renesas/draak.dtsi index 1ac15aa05b823ba9..ff799ab73f8a479d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -1,19 +1,17 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Draak board with R-Car D3 + * Device Tree Source for the Draak board * * Copyright (C) 2016-2018 Renesas Electronics Corp. * Copyright (C) 2017 Glider bvba */ -/dts-v1/; -#include "r8a77995.dtsi" #include #include / { - model = "Renesas Draak board based on r8a77995"; - compatible = "renesas,draak", "renesas,r8a77995"; + model = "Renesas Draak board"; + compatible = "renesas,draak"; aliases { serial0 = &scif2; @@ -253,7 +251,7 @@ phy0: ethernet-phy@0 { * TX clock internal delay mode is required for reliable * 1Gbps communication using the KSZ9031RNX phy present on * the Draak board, however, TX clock internal delay mode - * isn't supported on r8a77995. Thus, limit speed to + * isn't supported on R-Car D3(e). Thus, limit speed to * 100Mbps for reliable communication. */ max-speed = <100>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 1ac15aa05b823ba9..384825617fcff1ff 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -8,678 +8,9 @@ /dts-v1/; #include "r8a77995.dtsi" -#include -#include +#include "draak.dtsi" / { model = "Renesas Draak board based on r8a77995"; compatible = "renesas,draak", "renesas,r8a77995"; - - aliases { - serial0 = &scif2; - ethernet0 = &avb; - }; - - audio_clkout: audio-clkout { - /* - * This is same as <&rcar_sound 0> - * but needed to avoid cs2000/rcar_sound probe dead-lock - */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12288000>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 50000>; - - brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>; - default-brightness-level = <10>; - - power-supply = <®_12p0v>; - enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - composite-in { - compatible = "composite-video-connector"; - - port { - composite_con_in: endpoint { - remote-endpoint = <&adv7180_in>; - }; - }; - }; - - hdmi-in { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&adv7612_in>; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&keys_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW56-1"; - wakeup-source; - debounce-interval = <20>; - }; - key-2 { - gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW56-2"; - wakeup-source; - debounce-interval = <20>; - }; - key-3 { - gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW56-3"; - wakeup-source; - debounce-interval = <20>; - }; - key-4 { - gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - linux,code = ; - label = "SW56-4"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <®_3p3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x18000000>; - }; - - reg_1p8v: regulator-1p8v { - compatible = "regulator-fixed"; - regulator-name = "fixed-1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - reg_12p0v: regulator-12p0v { - compatible = "regulator-fixed"; - regulator-name = "D12.0V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-boot-on; - regulator-always-on; - }; - - sound_card: sound { - compatible = "audio-graph-card"; - - dais = <&rsnd_port0 /* ak4613 */ - /* HDMI is not yet supported */ - >; - }; - - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; - }; - - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; - - x19_clk: x19 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; -}; - -&audio_clk_b { - /* - * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, - * and R-Car Sound uses AUDIO_CLKB. - * Note is that schematic indicates VI4_FIELD conection only - * not AUDIO_CLKB at SoC page. - * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. - * SW60 should be 1-2. - */ - - clock-frequency = <22579200>; -}; - -&avb { - pinctrl-0 = <&avb0_pins>; - pinctrl-names = "default"; - renesas,no-ether-link; - phy-handle = <&phy0>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio5>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; - /* - * TX clock internal delay mode is required for reliable - * 1Gbps communication using the KSZ9031RNX phy present on - * the Draak board, however, TX clock internal delay mode - * isn't supported on r8a77995. Thus, limit speed to - * 100Mbps for reliable communication. - */ - max-speed = <100>; - }; -}; - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&can1 { - pinctrl-0 = <&can1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&x12_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&adv7123_in>; - }; - }; - }; -}; - -&ehci0 { - dr_mode = "host"; - status = "okay"; -}; - -&extal_clk { - clock-frequency = <48000000>; -}; - -&hsusb { - dr_mode = "host"; - status = "okay"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - - ak4613: codec@10 { - compatible = "asahi-kasei,ak4613"; - #sound-dai-cells = <0>; - reg = <0x10>; - clocks = <&rcar_sound 0>; /* audio_clkout */ - - asahi-kasei,in1-single-end; - asahi-kasei,in2-single-end; - asahi-kasei,out1-single-end; - asahi-kasei,out2-single-end; - asahi-kasei,out3-single-end; - asahi-kasei,out4-single-end; - asahi-kasei,out5-single-end; - asahi-kasei,out6-single-end; - - port { - ak4613_endpoint: endpoint { - remote-endpoint = <&rsnd_for_ak4613>; - }; - }; - }; - - composite-in@20 { - compatible = "adi,adv7180cp"; - reg = <0x20>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7180_in: endpoint { - remote-endpoint = <&composite_con_in>; - }; - }; - - port@3 { - reg = <3>; - - /* - * The VIN4 video input path is shared between - * CVBS and HDMI inputs through SW[49-53] - * switches. - * - * CVBS is the default selection, link it to - * VIN4 here. - */ - adv7180_out: endpoint { - remote-endpoint = <&vin4_in>; - }; - }; - }; - - }; - - hdmi-encoder@39 { - compatible = "adi,adv7511w"; - reg = <0x39>, <0x3f>, <0x3c>, <0x38>; - reg-names = "main", "edid", "cec", "packet"; - interrupt-parent = <&gpio1>; - interrupts = <28 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&thc63lvd1024_out>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - hdmi-decoder@4c { - compatible = "adi,adv7612"; - reg = <0x4c>; - default-input = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - adv7612_in: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - - port@2 { - reg = <2>; - - /* - * The VIN4 video input path is shared between - * CVBS and HDMI inputs through SW[49-53] - * switches. - * - * CVBS is the default selection, leave HDMI - * not connected here. - */ - adv7612_out: endpoint { - pclk-sample = <0>; - hsync-active = <0>; - vsync-active = <0>; - }; - }; - }; - }; - - cs2000: clk-multiplier@4f { - #clock-cells = <0>; - compatible = "cirrus,cs2000-cp"; - reg = <0x4f>; - clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */ - clock-names = "clk_in", "ref_clk"; - - assigned-clocks = <&cs2000>; - assigned-clock-rates = <24576000>; /* 1/1 divide */ - }; - - eeprom@50 { - compatible = "rohm,br24t01", "atmel,24c01"; - reg = <0x50>; - pagesize = <8>; - }; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&lvds0 { - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x12_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; - -&lvds1 { - /* - * Even though the LVDS1 output is not connected, the encoder must be - * enabled to supply a pixel clock to the DU for the DPAD output when - * LVDS0 is in use. - */ - status = "okay"; - - clocks = <&cpg CPG_MOD 727>, - <&x12_clk>, - <&extal_clk>; - clock-names = "fck", "dclkin.0", "extal"; -}; - -&ohci0 { - dr_mode = "host"; - status = "okay"; -}; - -&pfc { - avb0_pins: avb { - groups = "avb0_link", "avb0_mdio", "avb0_mii"; - function = "avb0"; - }; - - can0_pins: can0 { - groups = "can0_data_a"; - function = "can0"; - }; - - can1_pins: can1 { - groups = "can1_data_a"; - function = "can1"; - }; - - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - groups = "i2c1"; - function = "i2c1"; - }; - - keys_pins: keys { - pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15"; - bias-pull-up; - }; - - pwm0_pins: pwm0 { - groups = "pwm0_c"; - function = "pwm0"; - }; - - pwm1_pins: pwm1 { - groups = "pwm1_c"; - function = "pwm1"; - }; - - scif2_pins: scif2 { - groups = "scif2_data"; - function = "scif2"; - }; - - sdhi2_pins: sd2 { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <1800>; - }; - - sound_pins: sound { - groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a"; - function = "ssi"; - }; - - sound_clk_pins: sound-clk { - groups = "audio_clk_a", "audio_clk_b", - "audio_clkout", "audio_clkout1"; - function = "audio_clk"; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - vin4_pins_cvbs: vin4 { - groups = "vin4_data8", "vin4_sync", "vin4_clk"; - function = "vin4"; - }; -}; - -&pwm0 { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&pwm1 { - pinctrl-0 = <&pwm1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - /* audio_clkout0/1 */ - #clock-cells = <1>; - clock-frequency = <12288000 11289600>; - - status = "okay"; - - clocks = <&cpg CPG_MOD 1005>, - <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>, - <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, - <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, - <&cs2000>, <&audio_clk_b>, - <&cpg CPG_CORE R8A77995_CLK_ZA2>; - - ports { - rsnd_port0: port { - rsnd_for_ak4613: endpoint { - remote-endpoint = <&ak4613_endpoint>; - dai-format = "left_j"; - bitclock-master = <&rsnd_for_ak4613>; - frame-master = <&rsnd_for_ak4613>; - playback = <&ssi3>, <&src5>, <&dvc0>; - capture = <&ssi4>, <&src6>, <&dvc1>; - }; - }; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif2 { - pinctrl-0 = <&scif2_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi2 { - /* used for on-board eMMC */ - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <®_3p3v>; - vqmmc-supply = <®_1p8v>; - bus-width = <8>; - mmc-hs200-1_8v; - no-sd; - no-sdio; - non-removable; - status = "okay"; -}; - -&ssi4 { - shared-pin; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - renesas,no-otg-pins; - status = "okay"; -}; - -&vin4 { - pinctrl-0 = <&vin4_pins_cvbs>; - pinctrl-names = "default"; - - status = "okay"; - - ports { - port { - vin4_in: endpoint { - remote-endpoint = <&adv7180_out>; - }; - }; - }; }; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel