linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: imr@rtschenk.de (Rojhalat Ibrahim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] reset-socfpga: Fix nr_resets property
Date: Wed, 15 Feb 2017 14:06:08 +0100	[thread overview]
Message-ID: <3302533.E0QKRXBlfc@pcimr> (raw)

The SoC-FPGA reset controller driver defines NR_BANKS as 4 and uses that define
for two unrelated purposes. It is used
1. as an increment for reset line banks which are 32-bit registers with 4-byte
aligned addresses.
2. as the total number of reset line banks which together with the number of
resets per bank (32) limits the total number of useable resets to 96 and the
highest useable reset ID to 95.

This is clearly wrong as there are resets with higher IDs than 95 defined in
include/dt-bindings/reset/altr,rst-mgr.h and altr,rst-mgr-a10.h.

The patch introduces a new define BANK_INCREMENT for calculating the register
addresses as before and increases NR_BANKS to 6 for useable reset IDs up to 191.

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
---
 reset-socfpga.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c
index 43e4a9f..1c8e491 100644
--- a/drivers/reset/reset-socfpga.c
+++ b/drivers/reset/reset-socfpga.c
@@ -25,7 +25,8 @@
 #include <linux/spinlock.h>
 #include <linux/types.h>
 
-#define NR_BANKS		4
+#define BANK_INCREMENT		4
+#define NR_BANKS		6
 
 struct socfpga_reset_data {
 	spinlock_t			lock;
@@ -46,8 +47,8 @@ static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg | BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
 	spin_unlock_irqrestore(&data->lock, flags);
 
 	return 0;
@@ -67,8 +68,8 @@ static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
 
 	spin_lock_irqsave(&data->lock, flags);
 
-	reg = readl(data->membase + (bank * NR_BANKS));
-	writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
+	writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
 
 	spin_unlock_irqrestore(&data->lock, flags);
 
@@ -84,7 +85,7 @@ static int socfpga_reset_status(struct reset_controller_dev *rcdev,
 	int offset = id % BITS_PER_LONG;
 	u32 reg;
 
-	reg = readl(data->membase + (bank * NR_BANKS));
+	reg = readl(data->membase + (bank * BANK_INCREMENT));
 
 	return !(reg & BIT(offset));
 }

--
2.10.2

             reply	other threads:[~2017-02-15 13:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-15 13:06 Rojhalat Ibrahim [this message]
2017-02-15 14:57 ` [PATCH] reset-socfpga: Fix nr_resets property Philipp Zabel
2017-02-15 15:57   ` Dinh Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3302533.E0QKRXBlfc@pcimr \
    --to=imr@rtschenk.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).