linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jose Abreu <Jose.Abreu@synopsys.com>
To: netdev@vger.kernel.org
Cc: Jose Abreu <Jose.Abreu@synopsys.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	Alexandre Torgue <alexandre.torgue@st.com>,
	linux-kernel@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	"David S. Miller" <davem@davemloft.net>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next 4/6] net: stmmac: Add support for SA Insertion/Replacement in GMAC4+
Date: Tue, 10 Sep 2019 16:41:25 +0200	[thread overview]
Message-ID: <34f683da6f4774a1336174a213d035483e9e088f.1568126224.git.joabreu@synopsys.com> (raw)
In-Reply-To: <cover.1568126224.git.joabreu@synopsys.com>
In-Reply-To: <cover.1568126224.git.joabreu@synopsys.com>

Add the support for Source Address Insertion and Replacement in GMAC4
and GMAC5 cores. Two methods are supported: Descriptor based and
register based.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4.h       |  3 +++
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c  | 13 +++++++++++++
 drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c |  8 ++++++++
 drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c   |  1 +
 5 files changed, 26 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 4dfa69850040..fad121cbfe0e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -160,6 +160,8 @@ enum power_event {
 #define GMAC_DEBUG_RPESTS		BIT(0)
 
 /* MAC config */
+#define GMAC_CONFIG_SARC		GENMASK(30, 28)
+#define GMAC_CONFIG_SARC_SHIFT		28
 #define GMAC_CONFIG_IPC			BIT(27)
 #define GMAC_CONFIG_2K			BIT(22)
 #define GMAC_CONFIG_ACS			BIT(20)
@@ -175,6 +177,7 @@ enum power_event {
 #define GMAC_CONFIG_RE			BIT(0)
 
 /* MAC HW features0 bitmap */
+#define GMAC_HW_FEAT_SAVLANINS		BIT(27)
 #define GMAC_HW_FEAT_ADDMAC		BIT(18)
 #define GMAC_HW_FEAT_RXCOESEL		BIT(16)
 #define GMAC_HW_FEAT_TXCOSEL		BIT(14)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 5b43a8df1536..73dbfd810fca 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -759,6 +759,16 @@ static void dwmac4_update_vlan_hash(struct mac_device_info *hw, u32 hash,
 	}
 }
 
+static void dwmac4_sarc_configure(void __iomem *ioaddr, int val)
+{
+	u32 value = readl(ioaddr + GMAC_CONFIG);
+
+	value &= ~GMAC_CONFIG_SARC;
+	value |= val << GMAC_CONFIG_SARC_SHIFT;
+
+	writel(value, ioaddr + GMAC_CONFIG);
+}
+
 const struct stmmac_ops dwmac4_ops = {
 	.core_init = dwmac4_core_init,
 	.set_mac = stmmac_set_mac,
@@ -790,6 +800,7 @@ const struct stmmac_ops dwmac4_ops = {
 	.set_filter = dwmac4_set_filter,
 	.set_mac_loopback = dwmac4_set_mac_loopback,
 	.update_vlan_hash = dwmac4_update_vlan_hash,
+	.sarc_configure = dwmac4_sarc_configure,
 };
 
 const struct stmmac_ops dwmac410_ops = {
@@ -823,6 +834,7 @@ const struct stmmac_ops dwmac410_ops = {
 	.set_filter = dwmac4_set_filter,
 	.set_mac_loopback = dwmac4_set_mac_loopback,
 	.update_vlan_hash = dwmac4_update_vlan_hash,
+	.sarc_configure = dwmac4_sarc_configure,
 };
 
 const struct stmmac_ops dwmac510_ops = {
@@ -861,6 +873,7 @@ const struct stmmac_ops dwmac510_ops = {
 	.flex_pps_config = dwmac5_flex_pps_config,
 	.set_mac_loopback = dwmac4_set_mac_loopback,
 	.update_vlan_hash = dwmac4_update_vlan_hash,
+	.sarc_configure = dwmac4_sarc_configure,
 };
 
 int dwmac4_setup(struct stmmac_priv *priv)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index dbde23e7e169..8edc9f8787cc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -443,6 +443,13 @@ static void dwmac4_clear(struct dma_desc *p)
 	p->des3 = 0;
 }
 
+static void dwmac4_set_sarc(struct dma_desc *p, u32 sarc_type)
+{
+	sarc_type <<= TDES3_SA_INSERT_CTRL_SHIFT;
+
+	p->des3 |= cpu_to_le32(sarc_type & TDES3_SA_INSERT_CTRL_MASK);
+}
+
 static int set_16kib_bfsize(int mtu)
 {
 	int ret = 0;
@@ -476,6 +483,7 @@ const struct stmmac_desc_ops dwmac4_desc_ops = {
 	.get_addr = dwmac4_get_addr,
 	.set_addr = dwmac4_set_addr,
 	.clear = dwmac4_clear,
+	.set_sarc = dwmac4_set_sarc,
 };
 
 const struct stmmac_mode_ops dwmac4_ring_mode_ops = {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h
index f58191174287..6089d76a00d3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h
@@ -32,6 +32,7 @@
 #define TDES3_HDR_LEN_SHIFT		19
 #define TDES3_SLOT_NUMBER_MASK		GENMASK(22, 19)
 #define TDES3_SA_INSERT_CTRL_MASK	GENMASK(25, 23)
+#define TDES3_SA_INSERT_CTRL_SHIFT	23
 #define TDES3_CRC_PAD_CTRL_MASK		GENMASK(27, 26)
 
 /* TDES3 (write back format) */
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index 2456f421aac9..82d9761b2df2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -348,6 +348,7 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr,
 	/* TX and RX csum */
 	dma_cap->tx_coe = (hw_cap & GMAC_HW_FEAT_TXCOSEL) >> 14;
 	dma_cap->rx_coe =  (hw_cap & GMAC_HW_FEAT_RXCOESEL) >> 16;
+	dma_cap->vlins = (hw_cap & GMAC_HW_FEAT_SAVLANINS) >> 27;
 
 	/* MAC HW feature1 */
 	hw_cap = readl(ioaddr + GMAC_HW_FEATURE1);
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-09-10 14:43 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-10 14:41 [PATCH net-next 0/6] net: stmmac: Improvements for -next Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 1/6] net: stmmac: Prevent divide-by-zero Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 2/6] net: stmmac: Add VLAN HASH filtering support in GMAC4+ Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 3/6] net: stmmac: xgmac: Reinitialize correctly a variable Jose Abreu
2019-09-10 14:41 ` Jose Abreu [this message]
2019-09-10 14:41 ` [PATCH net-next 5/6] net: stmmac: Add support for VLAN Insertion Offload in GMAC4+ Jose Abreu
2019-09-10 14:41 ` [PATCH net-next 6/6] net: stmmac: ARP Offload for GMAC4+ Cores Jose Abreu
2019-09-10 16:50 ` [PATCH net-next 0/6] net: stmmac: Improvements for -next Jose Abreu
2019-09-10 20:36 ` Jesse Brandeburg
2019-09-11  8:21 ` David Miller
2019-09-11  8:59   ` Jose Abreu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=34f683da6f4774a1336174a213d035483e9e088f.1568126224.git.joabreu@synopsys.com \
    --to=jose.abreu@synopsys.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).