From mboxrd@z Thu Jan 1 00:00:00 1970 From: leonard.crestez@nxp.com (Leonard Crestez) Date: Fri, 31 Mar 2017 22:25:37 +0300 Subject: [PATCH 2/5] cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator In-Reply-To: References: Message-ID: <36c230773c14d37037dbe8cadf4f99b0d875e679.1490987945.git.leonard.crestez@nxp.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Irina Tirdea If there are any errors in getting the cpu0 regulators, the driver returns -ENOENT. In case the regulators are not yet available, the devm_regulator_get calls will return -EPROBE_DEFER, so that the driver can be probed later. If we return -ENOENT, the driver will fail its initialization and will not try to probe again (when the regulators become available). Return the actual error received from regulator_get in probe. Print a differentiated message in case we need to probe the device later and in case we actually failed. Also add a message to inform when the driver has been successfully registered. Signed-off-by: Irina Tirdea Signed-off-by: Leonard Crestez Acked-by: Viresh Kumar --- drivers/cpufreq/imx6q-cpufreq.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 7719b02..be90ee3 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -222,6 +222,13 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev) arm_reg = regulator_get(cpu_dev, "arm"); pu_reg = regulator_get_optional(cpu_dev, "pu"); soc_reg = regulator_get(cpu_dev, "soc"); + if (PTR_ERR(arm_reg) == -EPROBE_DEFER || + PTR_ERR(soc_reg) == -EPROBE_DEFER || + PTR_ERR(pu_reg) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + dev_dbg(cpu_dev, "regulators not ready, defer\n"); + goto put_reg; + } if (IS_ERR(arm_reg) || IS_ERR(soc_reg)) { dev_err(cpu_dev, "failed to get regulators\n"); ret = -ENOENT; -- 2.7.4