From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-7.1 required=3.0 tests=DKIMWL_WL_HIGH,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_PATCH,MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2295CC43381 for ; Sat, 23 Feb 2019 20:19:47 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id E595620675 for ; Sat, 23 Feb 2019 20:19:46 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="oK4fwoB8"; dkim=fail reason="signature verification failed" (2048-bit key) header.d=cogentembedded-com.20150623.gappssmtp.com header.i=@cogentembedded-com.20150623.gappssmtp.com header.b="fJrQpQTL" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org E595620675 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=cogentembedded.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:In-Reply-To:MIME-Version:Date: Message-ID:From:References:To:Subject:Reply-To:Content-ID:Content-Description :Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=NXiUyS4O4CS7bAlijFXW1BAnL9ct9CLlW0AqLATT/EA=; b=oK4fwoB8QGGEme OcP3Ppa9bHMaOcCtyMR50ZcMIG8efxBTZZYqJ+hGhb5pzSerK60LdbKOS77KrG3lSHlAAn7oDa5GV BzrXeeZc+3crVFI5CWMbaocQHhhM3PLp4FCkU9abhf1LFEEx6U8ratLe/jukjc08GVKkpi0RqPPzQ yrLipx8L8bncfpNKxEsDZGTgb4VAVUs76WZoGxsOKcPMXiAFT9RuQFmL6BeLTWSNFma8HbkLw07gM gw5uOIMQ7VXC9GlhX0Se8cYYWkdlAgsOM/XDYK2i9409yc2x1reoXsB295Cl7aMlXrFzj2EFCCU4K gVQzZcaV80g2rL9ZBb/g==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.90_1 #2 (Red Hat Linux)) id 1gxdlw-0001ce-Be; Sat, 23 Feb 2019 20:19:44 +0000 Received: from mail-lf1-x143.google.com ([2a00:1450:4864:20::143]) by bombadil.infradead.org with esmtps (Exim 4.90_1 #2 (Red Hat Linux)) id 1gxdls-0001c0-Ih for linux-arm-kernel@lists.infradead.org; Sat, 23 Feb 2019 20:19:42 +0000 Received: by mail-lf1-x143.google.com with SMTP id q11so4168270lfd.3 for ; Sat, 23 Feb 2019 12:19:40 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=cogentembedded-com.20150623.gappssmtp.com; s=20150623; h=subject:to:cc:references:from:organization:message-id:date :user-agent:mime-version:in-reply-to:content-language :content-transfer-encoding; bh=so8S+8x06h6Zr8gUjb8awpqJDd6cT+YXwuKXyySAEiQ=; b=fJrQpQTLFIZsHW/1c1u60xD516EODx1gKRsnVMUk9QDHdA3VfgDJ/SWb8ItUvXb6PD 3cYA3Vxkxe3rpzBxrZqK3wtBqrBafR7wYlGOVO5Oflb8dqVzCmlj76+5N2ldk60bzolx yRy4cLbBgvC1YFql+WUsOeywFxWtzFXU091nrxYwNJoiihz0SBur1tuj6mZS+2VcvvXz RezhumVnGnUsorLs90xZQh8JUhhn8afpoByAtHgLMxWj+z8qzNnYajfmzkx4MhHcLyH8 HSGWH6FmCv+YdGwoseu8RI8TQceDvFqwXiWU0bfW8OU8htxHF0d3IkQA0wQrGKMVa7PI eXAg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:subject:to:cc:references:from:organization :message-id:date:user-agent:mime-version:in-reply-to :content-language:content-transfer-encoding; bh=so8S+8x06h6Zr8gUjb8awpqJDd6cT+YXwuKXyySAEiQ=; b=UqDrFxA2JuS9aZnYHrHW7z/ffsRzJIZLCxq0Rvugjhq4u8xXPYUnZ+IN8hKK2+oX6B NDWkg00BhJGVZTV64EDq8zToNq0ZYY/7Jk3Tch0PCS3xBe9bZK0E8TM0nShBX4hhOVdh B4cPiXjBmmyZbXPpECd7yrN394g+oKkOS2hbfeZuOmL9PfKsOvPTwiBigZftLEfM/C/K c0VT12/cTxKioZLLuJu6iQ0dORChs1tdwAMzDv16acST0C0bFUoyGLtVZFoGA7H71ptF Rsyd7tqeJxI8hSUODB8Pdw7Sony9REeMrcuTEIyZ0PshdiGE03STBv2qSGli0E5uLN5N ufog== X-Gm-Message-State: AHQUAuZhgsIdKGW44UVJbkmWq8R/EbNeIL8X6nz5ZXmGjPWfjTKcB6pw 7Ib3JhTJbT5e9ZMbYY5aC9eS7L7l+9g= X-Google-Smtp-Source: AHgI3IauWVHFbjXrqfyY9RnkQHwJtNGWDzJPMocksY6i+4RHJvRwBXB/bnMWQoV6uU50OlxdP7pBAg== X-Received: by 2002:ac2:5542:: with SMTP id l2mr6574223lfk.108.1550953178019; Sat, 23 Feb 2019 12:19:38 -0800 (PST) Received: from wasted.cogentembedded.com ([31.173.83.184]) by smtp.gmail.com with ESMTPSA id h3sm1647428lfj.25.2019.02.23.12.19.36 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Sat, 23 Feb 2019 12:19:36 -0800 (PST) Subject: Re: [RFC PATCH 3/5] mtd: Add support for Hyperbus memory devices To: "Vignesh R (by way of Boris Brezillon )" , David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Rob Herring References: <20190219063607.29949-1-vigneshr@ti.com> <20190219063607.29949-4-vigneshr@ti.com> From: Sergei Shtylyov Organization: Cogent Embedded Message-ID: <42d0fd7b-42e0-605c-70ee-6e308908fc90@cogentembedded.com> Date: Sat, 23 Feb 2019 23:19:35 +0300 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.2.1 MIME-Version: 1.0 In-Reply-To: <20190219063607.29949-4-vigneshr@ti.com> Content-Language: en-MW X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190223_121940_789826_48C4EB99 X-CRM114-Status: GOOD ( 32.64 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.21 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Arnd Bergmann , tudor.ambarus@microchip.com, Greg Kroah-Hartman , nsekhar@ti.com, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+infradead-linux-arm-kernel=archiver.kernel.org@lists.infradead.org Hello! On 02/19/2019 09:36 AM, Vignesh R (by way of Boris Brezillon ) wrote: > Cypress HyperBus is Low Signal Count, High Performance Double Data Rate Bus > interface between a host system master and one or more slave interfaces. > HyperBus is used to connect microprocessor, microcontroller, or ASIC > devices with random access NOR flash memory(called HyperFlash) or Need space before (. > self refresh DRAM(called HyperRAM). > > Its a 8-bit data bus (DQ[7:0]) with Read-Write Data Strobe (RWDS) > signal and either Single-ended clock(3.0V parts) or Differential clock > (1.8V parts). It uses ChipSelect lines to select b/w multiple slaves. > At bus level, it follows a separate protocol described in HyperBus > specification[1]. > > HyperFlash follows CFI AMD/Fujitsu Extended Command Set (0x0002) similar > to that of existing parallel NORs. Since Hyperbus is x8 DDR bus, > its equivalent to x16 parallel NOR flash wrt bits per clk. But Hyperbus > operates at >166MHz frequencies. > HyperRAM provides direct random read/write access to flash memory > array. > > But, Hyperbus memory controllers seem to abstract implementation details > and expose a simple MMIO interface to access connected flash. > > Add support for registering HyperFlash devices with MTD framework. MTD > maps framework along with CFI chip support framework are used to support > communicate with flash. Communicating. > Framework is modelled along the lines of spi-nor framework. HyperBus > memory controller(HBMC) drivers call hb_register_device() to register a Again, space needed before (. > single HyperFlash device. HyperFlash core parses MMIO access > information from DT, sets up the map_info struct, probes CFI flash and > registers it with MTD framework. > > Some HBMC masters need calibration/training sequence[3] to be carried > out, in order for DLL inside the controller to lock, by reading a known > string/pattern. This is done by repeatedly reading CFI Query > Identification String. Calibration needs to be done before try to detect Trying. > flash as part of CFI flash probe. > > HyperRAM is not supported atm. ATM? > HyperBus specification can be found at[1] > HyperFlash datasheet can be found at[2] > > [1] https://www.cypress.com/file/213356/download > [2] https://www.cypress.com/file/213346/download > [3] http://www.ti.com/lit/ug/spruid7b/spruid7b.pdf > Table 12-5741. HyperFlash Access Sequence > > Signed-off-by: Vignesh R [...] > diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig > new file mode 100644 > index 000000000000..02c38afc5c50 > --- /dev/null > +++ b/drivers/mtd/hyperbus/Kconfig > @@ -0,0 +1,23 @@ > +menuconfig MTD_HYPERBUS > + tristate "Hyperbus support" > + select MTD_CFI > + select MTD_MAP_BANK_WIDTH_2 > + select MTD_CFI_AMDSTD > + select MTD_COMPLEX_MAPPINGS > + help > + This is the framework for the Hyperbus which can be used by > + the Hyperbus Controller driver to commmunicate with ^^^ Too many m's. :-) > + Hyperflash. See Cypress Hyperbus specification for more > + details > + > + > +if MTD_HYPERBUS > + > +config HBMC_AM654 > + tristate "Hyperbus controller driver for AM65x SoC" > + help > + This is the driver for Hyperbus controller on TI's AM65x and > + other SoCs > + > +endif # MTD_HYPERBUS The above clearly belongs to patch #5. > + No empty lines at end of file, please... > diff --git a/drivers/mtd/hyperbus/Makefile b/drivers/mtd/hyperbus/Makefile > new file mode 100644 > index 000000000000..64e377d7f636 > --- /dev/null > +++ b/drivers/mtd/hyperbus/Makefile > @@ -0,0 +1,4 @@ > +# SPDX-License-Identifier: GPL-2.0 > + > +obj-$(CONFIG_MTD_HYPERBUS) += core.o > +obj-$(CONFIG_HBMC_AM654) += hbmc_am654.o The above line clearly belongs to patch #5 as well... > diff --git a/drivers/mtd/hyperbus/core.c b/drivers/mtd/hyperbus/core.c > new file mode 100644 > index 000000000000..d3d44aab7503 > --- /dev/null > +++ b/drivers/mtd/hyperbus/core.c > @@ -0,0 +1,167 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// > +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ > +// Author: Vignesh R > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define HB_CALIB_COUNT 25 Isn't this controller specific? [...] > +/* Calibrate HBMC by repeatedly reading "QRY" string from CFI space */ > +static int hb_calibrate(struct hb_device *hbdev) s/int/bool/, perhaps? [...] > +int hb_register_device(struct hb_device *hbdev) > +{ > + struct resource res; > + struct device *dev; > + struct device_node *np; > + struct map_info *map; > + struct hb_ops *ops; > + int err; > + > + if (!hbdev || !hbdev->dev || !hbdev->np) { > + pr_err("hyperbus: please fill all the necessary fields!\n"); > + return -EINVAL; > + } > + > + np = hbdev->np; > + if (!of_device_is_compatible(np, "cypress,hyperflash")) > + return -ENODEV; > + > + hbdev->memtype = HYPERFLASH; > + > + if (of_address_to_resource(np, 0, &res)) Isn't the direct mapping property of the HF controller, not of HyperFlash itself? > + return -EINVAL; > + > + dev = hbdev->dev; > + map = &hbdev->map; > + map->size = resource_size(&res); > + map->virt = devm_ioremap_resource(dev, &res); > + if (IS_ERR(map->virt)) > + return PTR_ERR(map->virt); > + > + map->name = dev_name(dev); > + map->bankwidth = 2; > + > + simple_map_init(map); It's not that simple, I'm afraid -- e.g. Renesas RPC-IF has read and write mappings in the separate memory resources. [...] > + if (hbdev->needs_calib) { > + err = hb_calibrate(hbdev); > + if (!err) { Why call this variable 'err' when it indicates successful calibration? > + dev_err(hbdev->dev, "Calibration failed\n"); > + return -ENODEV; > + } > + } > + > + hbdev->mtd = do_map_probe("cfi_probe", map); > + if (!hbdev->mtd) { > + dev_err(hbdev->dev, "probing failed\n"); "map probe", perhaps? > + return -ENXIO; > + } > + > + hbdev->mtd->dev.parent = hbdev->dev; > + mtd_set_of_node(hbdev->mtd, np); > + > + err = mtd_device_register(hbdev->mtd, NULL, 0); > + if (err) { > + dev_err(hbdev->dev, "failed to register mtd device\n"); > + goto err_destroy; > + } > + hbdev->registered = true; > + > + return 0; > + > +err_destroy: The label and the code below doesn't seem necessary. Just do it above instead of *goto*. > + map_destroy(hbdev->mtd); > + return err; > +} [...] > diff --git a/include/linux/mtd/hyperbus.h b/include/linux/mtd/hyperbus.h > new file mode 100644 > index 000000000000..0aa11458c424 > --- /dev/null > +++ b/include/linux/mtd/hyperbus.h > @@ -0,0 +1,73 @@ > +/* SPDX-License-Identifier: GPL-2.0 > + * > + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ > + */ > + > +#ifndef __LINUX_MTD_HYPERBUS_H__ > +#define __LINUX_MTD_HYPERBUS_H__ > + > +#include > + > +enum hb_memtype { I'm for the full hyperbus_ prefixes, it's not that long and seems clearer. [...] MBR, Sergei _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel