From mboxrd@z Thu Jan 1 00:00:00 1970 From: arnd@arndb.de (Arnd Bergmann) Date: Mon, 05 Sep 2016 17:39:27 +0200 Subject: [PATCH] usb: dwc3: host: inherit dma configuration from parent dev In-Reply-To: References: <6414695.LEIYfGPUEg@wuerfel> Message-ID: <4865343.bOXkeC8XtQ@wuerfel> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Friday, September 2, 2016 5:16:31 PM CEST Leo Li wrote: > > Can we use the firmware or bootloader information to provide the > default dma-mapping attributes for devices that doesn't have an > of_node pointer or ACPI data? This will at least restore what we had > previously provided . I'm concerned that changing all the drivers > that are creating child device will be a big effort. Like I mentioned > in another thread, there are many instances of platform_device_add() > under the drivers/ directory. Fortunately, there are not too many drivers that call platform_device_add *and* try to set up a dma mask for the child device: git grep -wl dma_mask drivers | xargs grep -wl 'platform_device_\(add\|register\)' drivers/base/platform.c drivers/bcma/main.c drivers/eisa/virtual_root.c drivers/mfd/mfd-core.c drivers/mfd/omap-usb-host.c drivers/misc/mic/card/mic_x100.c drivers/platform/goldfish/pdev_bus.c drivers/ssb/main.c drivers/usb/chipidea/core.c drivers/usb/dwc3/dwc3-exynos.c drivers/usb/dwc3/host.c drivers/usb/gadget/udc/bdc/bdc_pci.c drivers/usb/host/bcma-hcd.c drivers/usb/host/fsl-mph-dr-of.c drivers/usb/host/ssb-hcd.c drivers/usb/misc/ftdi-elan.c drivers/usb/musb/blackfin.c drivers/usb/musb/musb_dsps.c drivers/usb/musb/omap2430.c drivers/usb/musb/ux500.c Most of these are probably never used with any nonstandard DMA settings (IOMMU, cache coherency, offset, ...). One thing we could possibly do is to go through these and replace the hardcoded dma mask setup with of_dma_configure() in all cases in which we actually use DT for probing, which should cover the interesting cases. Arnd