From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] ARM: shmobile: r8a7740: add MSTP clock assignments to DT
Date: Tue, 26 Aug 2014 14:23:57 +0900 [thread overview]
Message-ID: <4a7ae2e27e18cbbdd83fb7783cd62abb4a62f33b.1409030383.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1409030383.git.horms+renesas@verge.net.au>
From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Assigns clocks to ether, i2c*, scif*, tpu, mmcif0, sdhi*, and fsi2.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740.dtsi | 28 +++++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 3c61c5d..6cd6a46 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -126,7 +126,7 @@
reg = <0xe9a00000 0x800>,
<0xe9a01800 0x800>;
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
- /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */
+ clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
phy-mode = "mii";
#address-cells = <1>;
#size-cells = <0>;
@@ -142,6 +142,7 @@
0 202 IRQ_TYPE_LEVEL_HIGH
0 203 IRQ_TYPE_LEVEL_HIGH
0 204 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
status = "disabled";
};
@@ -154,6 +155,7 @@
0 71 IRQ_TYPE_LEVEL_HIGH
0 72 IRQ_TYPE_LEVEL_HIGH
0 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
status = "disabled";
};
@@ -161,6 +163,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c40000 0x100>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -168,6 +172,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c50000 0x100>;
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -175,6 +181,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c60000 0x100>;
interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -182,6 +190,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c70000 0x100>;
interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -189,6 +199,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c80000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -196,6 +208,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -203,6 +217,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -210,6 +226,8 @@
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -217,6 +235,8 @@
compatible = "renesas,scifb-r8a7740", "renesas,scifb";
reg = <0xe6c30000 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+ clock-names = "sci_ick";
status = "disabled";
};
@@ -240,6 +260,7 @@
tpu: pwm at e6600000 {
compatible = "renesas,tpu-r8a7740", "renesas,tpu";
reg = <0xe6600000 0x100>;
+ clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
status = "disabled";
#pwm-cells = <3>;
};
@@ -249,6 +270,7 @@
reg = <0xe6bd0000 0x100>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
0 57 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_MMC>;
status = "disabled";
};
@@ -258,6 +280,7 @@
interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
0 118 IRQ_TYPE_LEVEL_HIGH
0 119 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -269,6 +292,7 @@
interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
0 122 IRQ_TYPE_LEVEL_HIGH
0 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -280,6 +304,7 @@
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
0 126 IRQ_TYPE_LEVEL_HIGH
0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
cap-sd-highspeed;
cap-sdio-irq;
status = "disabled";
@@ -290,6 +315,7 @@
compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
reg = <0xfe1f0000 0x400>;
interrupts = <0 9 0x4>;
+ clocks = <&mstp3_clks R8A7740_CLK_FSI>;
status = "disabled";
};
--
2.0.1
next prev parent reply other threads:[~2014-08-26 5:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 5:23 [GIT PULL] Renesas ARM Based SoC r8a7740 CCF and Timers Updates for v3.18 Simon Horman
2014-08-26 5:23 ` [PATCH 1/8] ARM: shmobile: r8a7740: clock register bits Simon Horman
2014-08-26 5:23 ` [PATCH 2/8] ARM: shmobile: r8a7740: add SoC clocks to DTS Simon Horman
2014-08-26 5:23 ` Simon Horman [this message]
2014-08-26 5:23 ` [PATCH 4/8] ARM: shmobile: armadillo800eva-reference: add clock overrides " Simon Horman
2014-08-26 5:23 ` [PATCH 5/8] ARM: shmobile: r8a7740: Add CMT1 device to DT Simon Horman
2014-08-26 5:24 ` [PATCH 6/8] ARM: shmobile: armadillo800eva-reference: Enable CMT1 in device tree Simon Horman
2014-08-26 5:24 ` [PATCH 7/8] ARM: shmobile: armadillo800eva-reference: Do not use r8a7740_add_standard_devices_dt() Simon Horman
2014-08-26 5:24 ` [PATCH 8/8] ARM: shmobile: r8a7740: Remove r8a7740_add_standard_devices_dt Simon Horman
2014-08-26 9:17 ` [GIT PULL] Renesas ARM Based SoC r8a7740 CCF and Timers Updates for v3.18 Simon Horman
2014-09-02 1:08 ` Simon Horman
2014-09-05 16:17 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4a7ae2e27e18cbbdd83fb7783cd62abb4a62f33b.1409030383.git.horms+renesas@verge.net.au \
--to=horms+renesas@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).