linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Leizhen (ThunderTown)" <thunder.leizhen@huawei.com>
To: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	"James Morse" <james.morse@arm.com>
Subject: Re: [PATCH v2] arm64: add the printing of tpidr_elx in __show_regs()
Date: Thu, 28 Apr 2022 19:07:51 +0800	[thread overview]
Message-ID: <4c956c17-6e13-37a1-7da3-b2c8243c2c01@huawei.com> (raw)
In-Reply-To: <20220428102156.GA14123@willie-the-truck>



On 2022/4/28 18:21, Will Deacon wrote:
> On Wed, Mar 16, 2022 at 02:24:08PM +0800, Zhen Lei wrote:
>> Commit 7158627686f0 ("arm64: percpu: implement optimised pcpu access
>> using tpidr_el1") and commit 6d99b68933fb ("arm64: alternatives: use
>> tpidr_el2 on VHE hosts") use tpidr_elx to cache my_cpu_offset to optimize
>> pcpu access. However, when performing reverse execution based on the
>> registers and the memory contents in kdump, this information is sometimes
>> required if there is a pcpu access.
>>
>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>> ---
>>  arch/arm64/kernel/process.c | 11 +++++++++++
>>  1 file changed, 11 insertions(+)
>>
>> v1 --> v2:
>> Directly print the tpidr_elx register of the current exception level.
>> Avoid coupling with the implementation of 'my_cpu_offset'.
>>
>> diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
>> index 5369e649fa79ff8..738932e6fa4e947 100644
>> --- a/arch/arm64/kernel/process.c
>> +++ b/arch/arm64/kernel/process.c
>> @@ -216,6 +216,17 @@ void __show_regs(struct pt_regs *regs)
>>  	show_regs_print_info(KERN_DEFAULT);
>>  	print_pstate(regs);
>>  
>> +	switch (read_sysreg(CurrentEL)) {
> 
> This should use is_kernel_in_hyp_mode() to detect if we're running at El2.
> 
>> +	case CurrentEL_EL1:
>> +		printk("tpidr_el1 : %016llx\n", read_sysreg(TPIDR_EL1));
>> +		break;
>> +	case CurrentEL_EL2:
>> +		printk("tpidr_el2 : %016llx\n", read_sysreg(TPIDR_EL2));
>> +		break;
>> +	default:
>> +		break;
>> +	}
> 
> I think this path can be triggered directly from usermode, so we really
> shouldn't be printing raw kernel virtual addresses here.

I run echo c > /proc/sysrq-trigger and didn't trigger this path, but maybe
there's another way. Analysis from the other side, except for the instruction
address, all generic registers r0-r31 is output as raw. There's also an
opportunity to contain the instruction address.

So how about:
+       if (oops_in_progress)
+               printk("tpidr : %016lx\n", __my_cpu_offset);

> 
> Will
> .
> 

-- 
Regards,
  Zhen Lei

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-04-28 11:13 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-16  6:24 [PATCH v2] arm64: add the printing of tpidr_elx in __show_regs() Zhen Lei
2022-04-27 18:40 ` Catalin Marinas
2022-04-28 10:23   ` Will Deacon
2022-04-28 10:21 ` Will Deacon
2022-04-28 11:07   ` Leizhen (ThunderTown) [this message]
2022-04-28 12:03     ` Leizhen (ThunderTown)
2022-04-28 12:10       ` Leizhen (ThunderTown)
2022-04-28 13:13       ` Will Deacon
2022-04-29  4:16         ` Leizhen (ThunderTown)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4c956c17-6e13-37a1-7da3-b2c8243c2c01@huawei.com \
    --to=thunder.leizhen@huawei.com \
    --cc=catalin.marinas@arm.com \
    --cc=james.morse@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).