From: srinivas.kandagatla@linaro.org (Srinivas Kandagatla)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/9] qcom: Add support for TSENS driver
Date: Tue, 11 Aug 2015 09:26:02 +0100 [thread overview]
Message-ID: <55C9B19A.9040901@linaro.org> (raw)
In-Reply-To: <1436348838-22671-1-git-send-email-rnayak@codeaurora.org>
Hi Rajendra,
On 08/07/15 10:47, Rajendra Nayak wrote:
> Changes since RFC:
> * Added support for 8916 and 8084
> * Based off the latest nvmem framework patches [1]
> * Minor review fixes for comments mostly from Lina
>
> ** I have also added irq support using the hardware
> trip point support series [2]. Will post that
> out seperately.
>
> This is an attempt to have a single TSENS driver for
> the different versions of the TSENS IP that exist, on
> different qcom msm/apq SoCs'
> Support is added for msm8916, msm8960 and msm8974 families.
> Based on top of the latest nvmem framework patches [2]
>
> A lot of the work is based of original code from Stephen Boyd
> and Siddartha Mohanadoss. I have also picked some of what
> Narendran Rajan did in his attempt to upstream the support
> for 8960 family. I could not keep the original authorship on
> any of the patches because I ended up moving the code around
> quite a bit in an effort to have a single driver for the
> various devices. I would be glad to change the authorship
> for any of the patches if needed.
>
> [1] https://lkml.org/lkml/2015/6/22/609
> [2] https://lkml.org/lkml/2015/5/20/472
>
> Rajendra Nayak (8):
> thermal: qcom: tsens: Add a skeletal TSENS drivers
> thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
> thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
> thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
> arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes
> arm: dts: apq8064: Add thermal zones, tsens and eeprom nodes
> arm: dts: apq8084: Add thermal zones, tsens and eeprom nodes
> arm64: dts: msm8916: Add thermal zones, tsens and eeprom nodes
>
> Srinivas Kandagatla (1):
> clk: qcom: gcc-msm8960: add child devices support.
>
> .../devicetree/bindings/thermal/qcom-tsens.txt | 37 +++
> arch/arm/boot/dts/qcom-apq8064.dtsi | 108 ++++++++
> arch/arm/boot/dts/qcom-apq8084.dtsi | 105 ++++++++
> arch/arm/boot/dts/qcom-msm8974.dtsi | 105 ++++++++
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 66 +++++
> drivers/clk/qcom/gcc-msm8960.c | 4 +-
> drivers/thermal/Kconfig | 5 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/qcom/Kconfig | 10 +
> drivers/thermal/qcom/Makefile | 2 +
> drivers/thermal/qcom/tsens-8916.c | 107 ++++++++
> drivers/thermal/qcom/tsens-8960.c | 291 +++++++++++++++++++++
> drivers/thermal/qcom/tsens-8974.c | 239 +++++++++++++++++
> drivers/thermal/qcom/tsens-common.c | 128 +++++++++
> drivers/thermal/qcom/tsens.c | 209 +++++++++++++++
> drivers/thermal/qcom/tsens.h | 69 +++++
> 16 files changed, 1485 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
> create mode 100644 drivers/thermal/qcom/Kconfig
> create mode 100644 drivers/thermal/qcom/Makefile
> create mode 100644 drivers/thermal/qcom/tsens-8916.c
> create mode 100644 drivers/thermal/qcom/tsens-8960.c
> create mode 100644 drivers/thermal/qcom/tsens-8974.c
> create mode 100644 drivers/thermal/qcom/tsens-common.c
> create mode 100644 drivers/thermal/qcom/tsens.c
> create mode 100644 drivers/thermal/qcom/tsens.h
>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
NVMEM framework in now available in linux-next.
Do you think we can get this in v4.3?
--srini
prev parent reply other threads:[~2015-08-11 8:26 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 9:47 [PATCH 0/9] qcom: Add support for TSENS driver Rajendra Nayak
2015-07-08 9:47 ` [PATCH 1/9] thermal: qcom: tsens: Add a skeletal TSENS drivers Rajendra Nayak
2015-07-08 9:47 ` [PATCH 2/9] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Rajendra Nayak
2015-07-08 9:47 ` [PATCH 3/9] thermal: qcom: tsens-8974: Add support for 8974 " Rajendra Nayak
2015-07-08 9:47 ` [PATCH 4/9] thermal: qcom: tsens-8960: Add support for 8960 " Rajendra Nayak
2015-07-08 9:47 ` [PATCH 5/9] clk: qcom: gcc-msm8960: add child devices support Rajendra Nayak
2015-08-11 22:49 ` Stephen Boyd
2015-08-12 9:00 ` Srinivas Kandagatla
2015-08-13 4:28 ` Rajendra Nayak
2015-08-14 0:42 ` Stephen Boyd
2015-08-14 3:09 ` Rajendra Nayak
2015-09-02 2:37 ` Rajendra Nayak
2015-09-03 17:27 ` Stephen Boyd
2015-09-07 6:39 ` Rajendra Nayak
2015-09-08 19:21 ` Stephen Boyd
2015-09-09 3:33 ` Rajendra Nayak
2015-09-09 5:15 ` Rajendra Nayak
2015-09-09 9:11 ` Srinivas Kandagatla
2015-08-12 20:18 ` Bjorn Andersson
2015-08-12 21:57 ` Stephen Boyd
2015-08-13 4:14 ` Bjorn Andersson
2015-08-14 0:46 ` Stephen Boyd
2015-07-08 9:47 ` [PATCH 6/9] arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes Rajendra Nayak
2015-07-08 9:47 ` [PATCH 7/9] arm: dts: apq8064: " Rajendra Nayak
2015-07-08 9:47 ` [PATCH 8/9] arm: dts: apq8084: " Rajendra Nayak
2015-07-08 9:47 ` [PATCH 9/9] arm64: dts: msm8916: " Rajendra Nayak
2015-08-11 8:26 ` Srinivas Kandagatla [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C9B19A.9040901@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).