From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Arnd Bergmann <arnd@arndb.de>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>,
Tony Lindgren <tony@atomide.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Linus Walleij <linus.walleij@linaro.org>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Tomi Valkeinen <tomi.valkeinen@ti.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 02/22] ARM: omap1: make omapfb standalone compilable
Date: Fri, 9 Aug 2019 13:32:36 +0200 [thread overview]
Message-ID: <55c9608d-68c4-17f6-2682-7668d5d7720a@samsung.com> (raw)
In-Reply-To: <20190808212234.2213262-3-arnd@arndb.de>
On 8/8/19 11:22 PM, Arnd Bergmann wrote:
> The omapfb driver is split into platform specific code for omap1, and
> driver code that is also specific to omap1.
>
> Moving both parts into the driver directory simplifies the structure
> and avoids the dependency on certain omap machine header files.
>
> The interrupt numbers in particular however must not be referenced
> directly from the driver to allow building in a multiplatform
> configuration, so these have to be passed through resources, is
> done for all other omap drivers.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For fbdev part:
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
[ It seems that adding of static inline for omap_set_dma_priority()
when ARCH_OMAP=n should be in patch #9 but this is a minor issue. ]
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> ---
> arch/arm/mach-omap1/Makefile | 4 --
> arch/arm/mach-omap1/fb.c | 19 +++++++-
> arch/arm/mach-omap1/include/mach/lcdc.h | 44 -------------------
> drivers/video/fbdev/Makefile | 2 +-
> drivers/video/fbdev/omap/Makefile | 5 +++
> .../video/fbdev/omap}/lcd_dma.c | 4 +-
> .../video/fbdev/omap}/lcd_dma.h | 2 -
> drivers/video/fbdev/omap/lcdc.c | 8 ++--
> drivers/video/fbdev/omap/lcdc.h | 35 +++++++++++++++
> drivers/video/fbdev/omap/omapfb.h | 2 +
> drivers/video/fbdev/omap/omapfb_main.c | 16 ++++++-
> drivers/video/fbdev/omap/sossi.c | 3 +-
> include/linux/omap-dma.h | 7 ++-
> 13 files changed, 90 insertions(+), 61 deletions(-)
> delete mode 100644 arch/arm/mach-omap1/include/mach/lcdc.h
> rename {arch/arm/mach-omap1 => drivers/video/fbdev/omap}/lcd_dma.c (99%)
> rename {arch/arm/mach-omap1/include/mach => drivers/video/fbdev/omap}/lcd_dma.h (98%)
>
> diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
> index c757a52d0801..450bbf552b57 100644
> --- a/arch/arm/mach-omap1/Makefile
> +++ b/arch/arm/mach-omap1/Makefile
> @@ -57,7 +57,3 @@ obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o
> obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
> obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
> obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
> -
> -ifneq ($(CONFIG_FB_OMAP),)
> -obj-y += lcd_dma.o
> -endif
> diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c
> index 0e32a959f254..b093375afc27 100644
> --- a/arch/arm/mach-omap1/fb.c
> +++ b/arch/arm/mach-omap1/fb.c
> @@ -17,9 +17,12 @@
> #include <linux/io.h>
> #include <linux/omapfb.h>
> #include <linux/dma-mapping.h>
> +#include <linux/irq.h>
>
> #include <asm/mach/map.h>
>
> +#include <mach/irqs.h>
> +
> #if IS_ENABLED(CONFIG_FB_OMAP)
>
> static bool omapfb_lcd_configured;
> @@ -27,6 +30,19 @@ static struct omapfb_platform_data omapfb_config;
>
> static u64 omap_fb_dma_mask = ~(u32)0;
>
> +struct resource omap_fb_resources[] = {
> + {
> + .name = "irq",
> + .start = INT_LCD_CTRL,
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .name = "irq",
> + .start = INT_SOSSI_MATCH,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> static struct platform_device omap_fb_device = {
> .name = "omapfb",
> .id = -1,
> @@ -35,7 +51,8 @@ static struct platform_device omap_fb_device = {
> .coherent_dma_mask = DMA_BIT_MASK(32),
> .platform_data = &omapfb_config,
> },
> - .num_resources = 0,
> + .num_resources = ARRAY_SIZE(omap_fb_resources),
> + .resource = omap_fb_resources,
> };
>
> void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
> diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h
> deleted file mode 100644
> index 7152db1f5361..000000000000
> --- a/arch/arm/mach-omap1/include/mach/lcdc.h
> +++ /dev/null
> @@ -1,44 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0-or-later */
> -/*
> - * arch/arm/mach-omap1/include/mach/lcdc.h
> - *
> - * Extracted from drivers/video/omap/lcdc.c
> - * Copyright (C) 2004 Nokia Corporation
> - * Author: Imre Deak <imre.deak@nokia.com>
> - */
> -#ifndef __MACH_LCDC_H__
> -#define __MACH_LCDC_H__
> -
> -#define OMAP_LCDC_BASE 0xfffec000
> -#define OMAP_LCDC_SIZE 256
> -#define OMAP_LCDC_IRQ INT_LCD_CTRL
> -
> -#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00)
> -#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04)
> -#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08)
> -#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c)
> -#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10)
> -#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14)
> -#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18)
> -#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c)
> -
> -#define OMAP_LCDC_STAT_DONE (1 << 0)
> -#define OMAP_LCDC_STAT_VSYNC (1 << 1)
> -#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2)
> -#define OMAP_LCDC_STAT_ABC (1 << 3)
> -#define OMAP_LCDC_STAT_LINE_INT (1 << 4)
> -#define OMAP_LCDC_STAT_FUF (1 << 5)
> -#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6)
> -
> -#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
> -#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7)
> -#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10)
> -
> -#define OMAP_LCDC_IRQ_VSYNC (1 << 2)
> -#define OMAP_LCDC_IRQ_DONE (1 << 3)
> -#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4)
> -#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5)
> -#define OMAP_LCDC_IRQ_LINE (1 << 6)
> -#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2)
> -
> -#endif /* __MACH_LCDC_H__ */
> diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
> index aab7155884ea..3324301e4c36 100644
> --- a/drivers/video/fbdev/Makefile
> +++ b/drivers/video/fbdev/Makefile
> @@ -111,7 +111,7 @@ obj-$(CONFIG_FB_UDL) += udlfb.o
> obj-$(CONFIG_FB_SMSCUFX) += smscufx.o
> obj-$(CONFIG_FB_XILINX) += xilinxfb.o
> obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o
> -obj-$(CONFIG_FB_OMAP) += omap/
> +obj-y += omap/
> obj-y += omap2/
> obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
> obj-$(CONFIG_FB_CARMINE) += carminefb.o
> diff --git a/drivers/video/fbdev/omap/Makefile b/drivers/video/fbdev/omap/Makefile
> index daaa73a94e7f..b88e02f5cb1f 100644
> --- a/drivers/video/fbdev/omap/Makefile
> +++ b/drivers/video/fbdev/omap/Makefile
> @@ -5,6 +5,11 @@
>
> obj-$(CONFIG_FB_OMAP) += omapfb.o
>
> +ifdef CONFIG_FB_OMAP
> +# must be built-in
> +obj-y += lcd_dma.o
> +endif
> +
> objs-yy := omapfb_main.o lcdc.o
>
> objs-y$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
> diff --git a/arch/arm/mach-omap1/lcd_dma.c b/drivers/video/fbdev/omap/lcd_dma.c
> similarity index 99%
> rename from arch/arm/mach-omap1/lcd_dma.c
> rename to drivers/video/fbdev/omap/lcd_dma.c
> index a72ac0c02b4f..867a63c06f42 100644
> --- a/arch/arm/mach-omap1/lcd_dma.c
> +++ b/drivers/video/fbdev/omap/lcd_dma.c
> @@ -26,7 +26,9 @@
> #include <linux/omap-dma.h>
>
> #include <mach/hardware.h>
> -#include <mach/lcdc.h>
> +
> +#include "lcdc.h"
> +#include "lcd_dma.h"
>
> int omap_lcd_dma_running(void)
> {
> diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/drivers/video/fbdev/omap/lcd_dma.h
> similarity index 98%
> rename from arch/arm/mach-omap1/include/mach/lcd_dma.h
> rename to drivers/video/fbdev/omap/lcd_dma.h
> index 1a3c0cf17899..1b4780197381 100644
> --- a/arch/arm/mach-omap1/include/mach/lcd_dma.h
> +++ b/drivers/video/fbdev/omap/lcd_dma.h
> @@ -60,6 +60,4 @@ extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
> extern void omap_set_lcd_dma_b1_mirror(int mirror);
> extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
>
> -extern int omap_lcd_dma_running(void);
> -
> #endif /* __MACH_OMAP1_LCD_DMA_H__ */
> diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
> index fa73acfc1371..65953b7fbdb9 100644
> --- a/drivers/video/fbdev/omap/lcdc.c
> +++ b/drivers/video/fbdev/omap/lcdc.c
> @@ -17,7 +17,6 @@
> #include <linux/clk.h>
> #include <linux/gfp.h>
>
> -#include <mach/lcdc.h>
> #include <linux/omap-dma.h>
>
> #include <asm/mach-types.h>
> @@ -25,6 +24,7 @@
> #include "omapfb.h"
>
> #include "lcdc.h"
> +#include "lcd_dma.h"
>
> #define MODULE_NAME "lcdc"
>
> @@ -713,7 +713,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
> }
> clk_enable(lcdc.lcd_ck);
>
> - r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
> + r = request_irq(fbdev->int_irq, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
> if (r) {
> dev_err(fbdev->dev, "unable to get IRQ\n");
> goto fail2;
> @@ -744,7 +744,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
> fail4:
> omap_free_lcd_dma();
> fail3:
> - free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
> + free_irq(fbdev->int_irq, lcdc.fbdev);
> fail2:
> clk_disable(lcdc.lcd_ck);
> fail1:
> @@ -759,7 +759,7 @@ static void omap_lcdc_cleanup(void)
> free_palette_ram();
> free_fbmem();
> omap_free_lcd_dma();
> - free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
> + free_irq(lcdc.fbdev->int_irq, lcdc.fbdev);
> clk_disable(lcdc.lcd_ck);
> clk_put(lcdc.lcd_ck);
> }
> diff --git a/drivers/video/fbdev/omap/lcdc.h b/drivers/video/fbdev/omap/lcdc.h
> index 8a7607d861c1..cbbfd9b9e949 100644
> --- a/drivers/video/fbdev/omap/lcdc.h
> +++ b/drivers/video/fbdev/omap/lcdc.h
> @@ -1,6 +1,41 @@
> /* SPDX-License-Identifier: GPL-2.0 */
> #ifndef LCDC_H
> #define LCDC_H
> +/*
> + * Copyright (C) 2004 Nokia Corporation
> + * Author: Imre Deak <imre.deak@nokia.com>
> + */
> +#define OMAP_LCDC_BASE 0xfffec000
> +#define OMAP_LCDC_SIZE 256
> +#define OMAP_LCDC_IRQ INT_LCD_CTRL
> +
> +#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00)
> +#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04)
> +#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08)
> +#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c)
> +#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10)
> +#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14)
> +#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18)
> +#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c)
> +
> +#define OMAP_LCDC_STAT_DONE (1 << 0)
> +#define OMAP_LCDC_STAT_VSYNC (1 << 1)
> +#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2)
> +#define OMAP_LCDC_STAT_ABC (1 << 3)
> +#define OMAP_LCDC_STAT_LINE_INT (1 << 4)
> +#define OMAP_LCDC_STAT_FUF (1 << 5)
> +#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6)
> +
> +#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
> +#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7)
> +#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10)
> +
> +#define OMAP_LCDC_IRQ_VSYNC (1 << 2)
> +#define OMAP_LCDC_IRQ_DONE (1 << 3)
> +#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4)
> +#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5)
> +#define OMAP_LCDC_IRQ_LINE (1 << 6)
> +#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2)
>
> int omap_lcdc_set_dma_callback(void (*callback)(void *data), void *data);
> void omap_lcdc_free_dma_callback(void);
> diff --git a/drivers/video/fbdev/omap/omapfb.h b/drivers/video/fbdev/omap/omapfb.h
> index d930152c289c..313a051fe7a4 100644
> --- a/drivers/video/fbdev/omap/omapfb.h
> +++ b/drivers/video/fbdev/omap/omapfb.h
> @@ -204,6 +204,8 @@ struct omapfb_device {
> struct lcd_panel *panel; /* LCD panel */
> const struct lcd_ctrl *ctrl; /* LCD controller */
> const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
> + int ext_irq;
> + int int_irq;
> struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
> interface */
> struct device *dev;
> diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
> index 90eca64e3144..dc06057de91d 100644
> --- a/drivers/video/fbdev/omap/omapfb_main.c
> +++ b/drivers/video/fbdev/omap/omapfb_main.c
> @@ -1618,7 +1618,7 @@ static int omapfb_do_probe(struct platform_device *pdev,
>
> init_state = 0;
>
> - if (pdev->num_resources != 0) {
> + if (pdev->num_resources != 1) {
> dev_err(&pdev->dev, "probed for an unknown device\n");
> r = -ENODEV;
> goto cleanup;
> @@ -1637,6 +1637,20 @@ static int omapfb_do_probe(struct platform_device *pdev,
> r = -ENOMEM;
> goto cleanup;
> }
> + fbdev->int_irq = platform_get_irq(pdev, 0);
> + if (!fbdev->int_irq) {
> + dev_err(&pdev->dev, "unable to get irq\n");
> + r = ENXIO;
> + goto cleanup;
> + }
> +
> + fbdev->ext_irq = platform_get_irq(pdev, 1);
> + if (!fbdev->ext_irq) {
> + dev_err(&pdev->dev, "unable to get irq\n");
> + r = ENXIO;
> + goto cleanup;
> + }
> +
> init_state++;
>
> fbdev->dev = &pdev->dev;
> diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
> index 80ac67f27f0d..ade9d452254c 100644
> --- a/drivers/video/fbdev/omap/sossi.c
> +++ b/drivers/video/fbdev/omap/sossi.c
> @@ -15,6 +15,7 @@
> #include <linux/omap-dma.h>
>
> #include "omapfb.h"
> +#include "lcd_dma.h"
> #include "lcdc.h"
>
> #define MODULE_NAME "omapfb-sossi"
> @@ -638,7 +639,7 @@ static int sossi_init(struct omapfb_device *fbdev)
> l &= ~(1 << 31); /* REORDERING */
> sossi_write_reg(SOSSI_INIT1_REG, l);
>
> - if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
> + if ((r = request_irq(fbdev->ext_irq, sossi_match_irq,
> IRQ_TYPE_EDGE_FALLING,
> "sossi_match", sossi.fbdev->dev)) < 0) {
> dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
> diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h
> index ba3cfbb52312..e9d76ac6321d 100644
> --- a/include/linux/omap-dma.h
> +++ b/include/linux/omap-dma.h
> @@ -346,8 +346,8 @@ extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
> void omap_dma_global_context_save(void);
> void omap_dma_global_context_restore(void);
>
> -#if defined(CONFIG_ARCH_OMAP1) && IS_ENABLED(CONFIG_FB_OMAP)
> -#include <mach/lcd_dma.h>
> +#if IS_ENABLED(CONFIG_FB_OMAP)
> +extern int omap_lcd_dma_running(void);
> #else
> static inline int omap_lcd_dma_running(void)
> {
> @@ -356,6 +356,9 @@ static inline int omap_lcd_dma_running(void)
> #endif
>
> #else /* CONFIG_ARCH_OMAP */
> +static inline void omap_set_dma_priority(int lch, int dst_port, int priority)
> +{
> +}
>
> static inline struct omap_system_dma_plat_info *omap_get_plat_info(void)
> {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-09 11:32 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-08 21:22 [PATCH 00/22] ARM: omap1 multiplatform support Arnd Bergmann
2019-08-08 21:22 ` [PATCH 01/22] ARM: omap1: innovator: pass lcd control address as pdata Arnd Bergmann
2019-08-09 11:29 ` Bartlomiej Zolnierkiewicz
2019-08-08 21:22 ` [PATCH 02/22] ARM: omap1: make omapfb standalone compilable Arnd Bergmann
2019-08-09 11:32 ` Bartlomiej Zolnierkiewicz [this message]
2019-08-09 11:43 ` Arnd Bergmann
2019-08-09 14:36 ` Bartlomiej Zolnierkiewicz
2019-08-09 19:55 ` Arnd Bergmann
2019-08-12 9:21 ` Bartlomiej Zolnierkiewicz
2019-08-08 21:22 ` [PATCH 03/22] ARM: omap1: move omap15xx local bus handling to usb.c Arnd Bergmann
2019-08-09 5:32 ` Felipe Balbi
2019-08-10 10:28 ` Christoph Hellwig
2019-08-08 21:22 ` [PATCH 04/22] ARM: omap1: move ohci phy power handling to board files Arnd Bergmann
2019-08-08 21:22 ` [PATCH 05/22] ARM: omap1: move mach/usb.h to include/linux/soc Arnd Bergmann
2019-08-08 21:22 ` [PATCH 06/22] ARM: omap1: move some headers " Arnd Bergmann
2019-08-08 21:22 ` [PATCH 07/22] ARM: omap1: move perseus spi pinconf to board file Arnd Bergmann
2019-08-08 22:24 ` Mark Brown
2019-08-09 11:29 ` Arnd Bergmann
2019-08-09 12:01 ` Mark Brown
2019-08-08 21:22 ` [PATCH 08/22] ARM: omap1: move CF chipselect setup " Arnd Bergmann
2019-08-08 21:22 ` [PATCH 09/22] fbdev: omap: avoid using mach/*.h files Arnd Bergmann
2019-08-09 11:34 ` Bartlomiej Zolnierkiewicz
2019-08-08 21:22 ` [PATCH 10/22] usb: omap: avoid mach/*.h headers Arnd Bergmann
2019-08-09 5:38 ` Greg Kroah-Hartman
2019-08-08 21:22 ` [PATCH 11/22] clocksource: ti-dmtimer: avoid using mach/hardware.h Arnd Bergmann
2019-08-09 7:01 ` Daniel Lezcano
2019-08-09 7:33 ` Arnd Bergmann
2019-08-09 7:57 ` Daniel Lezcano
2019-08-08 21:22 ` [PATCH 12/22] serial: 8250/omap1: include linux/soc/ti/omap1-soc.h Arnd Bergmann
2019-08-08 21:22 ` [PATCH 13/22] input: omap: void using mach/*.h headers Arnd Bergmann
2019-08-08 21:42 ` Dmitry Torokhov
2019-08-08 21:46 ` Arnd Bergmann
2019-08-08 22:19 ` Dmitry Torokhov
2019-08-08 23:39 ` Sebastian Reichel
2019-08-09 11:23 ` Arnd Bergmann
2019-08-08 21:22 ` [PATCH 14/22] ARM: omap1: use pci_ioremap_io() for omap_cf Arnd Bergmann
2019-08-13 10:36 ` Tony Lindgren
2019-08-13 11:02 ` Arnd Bergmann
2019-08-13 18:11 ` Aaro Koskinen
2019-08-13 19:33 ` Arnd Bergmann
2019-08-14 7:49 ` Tony Lindgren
2019-08-14 10:36 ` Arnd Bergmann
2019-08-14 13:40 ` Tony Lindgren
2019-08-16 8:34 ` Aaro Koskinen
2019-08-27 16:33 ` Arnd Bergmann
2019-08-27 19:04 ` Aaro Koskinen
2019-08-28 13:02 ` Arnd Bergmann
2019-08-28 18:23 ` Aaro Koskinen
2019-08-28 18:45 ` Tony Lindgren
2019-08-08 21:41 ` [PATCH 15/22] ARM: omap1: move mach/*.h into mach directory Arnd Bergmann
2019-08-08 21:41 ` [PATCH 16/22] ARM: omap1: move clk support into a single file Arnd Bergmann
2019-08-08 21:41 ` [PATCH 17/22] ARM: omap1: remove some dead clock code Arnd Bergmann
2019-08-08 21:41 ` [PATCH 18/22] ARM: omap1: clk: rework 'struct clk' Arnd Bergmann
2019-08-08 21:41 ` [PATCH 19/22] ARM: omap1: clk: use common_clk-like callbacks Arnd Bergmann
2019-08-08 21:43 ` [PATCH 20/22] ARM: omap1: clk: use clk_init_data Arnd Bergmann
2019-08-08 21:43 ` [PATCH 21/22] ARM: omap1: use common clk framework Arnd Bergmann
2019-08-14 21:10 ` Aaro Koskinen
2019-08-15 7:10 ` Arnd Bergmann
2019-08-08 21:47 ` [PATCH 22/22] ARM: omap1: enable multiplatform Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55c9608d-68c4-17f6-2682-7668d5d7720a@samsung.com \
--to=b.zolnierkie@samsung.com \
--cc=aaro.koskinen@iki.fi \
--cc=arnd@arndb.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).