From: Neil Armstrong <narmstrong@baylibre.com>
To: Vinod Koul <vkoul@kernel.org>
Cc: devicetree@vger.kernel.org, Remi Pommarel <repk@triplefau.lt>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: Re: [RESEND PATCH v3 3/3] phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog
Date: Fri, 20 Nov 2020 15:55:12 +0100 [thread overview]
Message-ID: <593b8745-6cb5-b6c3-9540-07dc6bc429b0@baylibre.com> (raw)
In-Reply-To: <20201120095825.GD2925@vkoul-mobl>
On 20/11/2020 10:58, Vinod Koul wrote:
> On 16-11-20, 11:16, Neil Armstrong wrote:
>> The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY,
>> thus we need to have inclusive support for both interfaces at runtime.
>>
>> This fixes the regmap get from parent node, removes cell param
>> to select a mode and implement runtime configuration & power on/off
>> for both functions since they are not exclusive.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> Reviewed-by: Remi Pommarel <repk@triplefau.lt>
>> ---
>> drivers/phy/amlogic/Kconfig | 1 +
>> .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 204 ++++++++++++------
>> 2 files changed, 136 insertions(+), 69 deletions(-)
>>
>> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
>> index 99e8a4c7f1f3..db5d0cd757e3 100644
>> --- a/drivers/phy/amlogic/Kconfig
>> +++ b/drivers/phy/amlogic/Kconfig
>> @@ -66,6 +66,7 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG
>> depends on OF && (ARCH_MESON || COMPILE_TEST)
>> select GENERIC_PHY
>> select REGMAP_MMIO
>> + select GENERIC_PHY_MIPI_DPHY
>> help
>> Enable this to support the Meson MIPI + PCIE analog PHY
>> found in Meson AXG SoCs.
>> diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
>> index 1431cbf885e1..6eb21551bdd9 100644
>> --- a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
>> +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
>> @@ -4,9 +4,13 @@
>> *
>> * Copyright (C) 2019 Remi Pommarel <repk@triplefau.lt>
>> */
>> +#include <linux/bitfield.h>
>> +#include <linux/bitops.h>
>> #include <linux/module.h>
>> #include <linux/phy/phy.h>
>> #include <linux/regmap.h>
>> +#include <linux/delay.h>
>> +#include <linux/mfd/syscon.h>
>> #include <linux/platform_device.h>
>> #include <dt-bindings/phy/phy.h>
>>
>> @@ -14,10 +18,10 @@
>> #define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28)
>> #define HHI_MIPI_CNTL0_ENABLE BIT(29)
>> #define HHI_MIPI_CNTL0_BANDGAP BIT(26)
>> -#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12)
>> -#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3)
>> +#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(25, 16)
>> +#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0)
>>
>> -#define HHI_MIPI_CNTL1 0x01
>> +#define HHI_MIPI_CNTL1 0x04
>> #define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12)
>> #define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4)
>> #define HHI_MIPI_CNTL1_LP_RESISTER BIT(3)
>> @@ -25,100 +29,170 @@
>> #define HHI_MIPI_CNTL1_INPUT_SEL BIT(1)
>> #define HHI_MIPI_CNTL1_PRBS7_EN BIT(0)
>>
>> -#define HHI_MIPI_CNTL2 0x02
>> +#define HHI_MIPI_CNTL2 0x08
>> #define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25)
>> #define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19)
>> #define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18)
>> #define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17)
>> #define HHI_MIPI_CNTL2_LPULPS_EN BIT(16)
>> -#define HHI_MIPI_CNTL2_CH_EN(n) BIT(15 - (n))
>> +#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11)
>> #define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1)
>>
>> +#define DSI_LANE_0 (1 << 4)
>> +#define DSI_LANE_1 (1 << 3)
>> +#define DSI_LANE_CLK (1 << 2)
>> +#define DSI_LANE_2 (1 << 1)
>> +#define DSI_LANE_3 (1 << 0)
>> +#define DSI_LANE_MASK (0x1F)
>
> This should use BIT(), also there are interesting helpers in bitfield.h
> to help with register fields, do send follow up patches..
>
Ok, cleanup will follow
Thanks,
Neil
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-11-20 14:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-16 10:16 [RESEND PATCH v3 0/3] phy: amlogic: add MIPI DSI function to analog MIPI+PCIe PHY Neil Armstrong
2020-11-16 10:16 ` [RESEND PATCH v3 1/3] dt-bindings: phy: amlogic, meson-axg-mipi-pcie-analog: remove reg attribute Neil Armstrong
2020-11-16 10:16 ` [RESEND PATCH v3 2/3] dt-bindings: phy: amlogic, meson-axg-mipi-pcie-analog: remove phy cell parameter Neil Armstrong
2020-11-16 10:16 ` [RESEND PATCH v3 3/3] phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog Neil Armstrong
2020-11-20 9:58 ` Vinod Koul
2020-11-20 14:55 ` Neil Armstrong [this message]
2020-11-20 9:59 ` [RESEND PATCH v3 0/3] phy: amlogic: add MIPI DSI function to analog MIPI+PCIe PHY Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=593b8745-6cb5-b6c3-9540-07dc6bc429b0@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=repk@triplefau.lt \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).