* [PATCH resend 1/2] ARM: dts: keystone-k2g: Add DSS node
2020-02-14 9:22 [PATCH resend 0/2] dts: keystone-k2g-evm: Display support Jyri Sarha
@ 2020-02-14 9:22 ` Jyri Sarha
2020-02-14 9:22 ` [PATCH resend 2/2] ARM: dts: keystone-k2g-evm: add HDMI video support Jyri Sarha
2020-02-14 17:40 ` [PATCH resend 0/2] dts: keystone-k2g-evm: Display support santosh.shilimkar
2 siblings, 0 replies; 6+ messages in thread
From: Jyri Sarha @ 2020-02-14 9:22 UTC (permalink / raw)
To: dri-devel, ssantosh, linux-arm-kernel, devicetree
Cc: mark.rutland, bparrot, praneeth, robh+dt, peter.ujfalusi,
tomi.valkeinen, laurent.pinchart
Add DT node for DSS. K2G has DSS version 6. Keystone family DSS are
somewhat different compered to the old OMAP family DSSes and the
binding looks different too.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
arch/arm/boot/dts/keystone-k2g.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 1c833105d6c5..08ba31780baa 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -324,6 +324,28 @@
clock-names = "gpio";
};
+ dss: dss@02540000 {
+ compatible = "ti,k2g-dss";
+ reg = <0x02540000 0x400>,
+ <0x02550000 0x1000>,
+ <0x02557000 0x1000>,
+ <0x0255a800 0x100>,
+ <0x0255ac00 0x100>;
+ reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
+ clocks = <&k2g_clks 0x2 0>,
+ <&k2g_clks 0x2 1>;
+ clock-names = "fck", "vp1";
+ interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
+
+ power-domains = <&k2g_pds 0x2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ max-memory-bandwidth = <230000000>;
+ };
+
edma0: edma@2700000 {
compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
reg = <0x02700000 0x8000>;
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH resend 2/2] ARM: dts: keystone-k2g-evm: add HDMI video support
2020-02-14 9:22 [PATCH resend 0/2] dts: keystone-k2g-evm: Display support Jyri Sarha
2020-02-14 9:22 ` [PATCH resend 1/2] ARM: dts: keystone-k2g: Add DSS node Jyri Sarha
@ 2020-02-14 9:22 ` Jyri Sarha
2020-02-14 17:40 ` [PATCH resend 0/2] dts: keystone-k2g-evm: Display support santosh.shilimkar
2 siblings, 0 replies; 6+ messages in thread
From: Jyri Sarha @ 2020-02-14 9:22 UTC (permalink / raw)
To: dri-devel, ssantosh, linux-arm-kernel, devicetree
Cc: mark.rutland, bparrot, praneeth, robh+dt, peter.ujfalusi,
tomi.valkeinen, laurent.pinchart
Add DT nodes for HDMI video support for K2G EVM. The HDMI uses SiI9022
DPI as HDMI encoder. The DSS DPI is connected to SiI9022 HDMI
encoder's video input and encoder's output goes to HDMI connector.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 101 +++++++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index b7f10bf94576..db640bab8c1d 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -45,6 +45,19 @@
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
+
+ hdmi: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&sii9022_out>;
+ };
+ };
+ };
};
&k2g_pinctrl {
@@ -89,6 +102,13 @@
>;
};
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
ecap0_pins: ecap0_pins {
pinctrl-single,pins = <
K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */
@@ -160,6 +180,40 @@
K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* MDIO_DATA.MDIO_DATA */
>;
};
+
+ vout_pins: pinmux_vout_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */
+ K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */
+ K2G_CORE_IOPAD(0x1080) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata21.dssdata21 */
+ K2G_CORE_IOPAD(0x1084) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata20.dssdata20 */
+ K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata19.dssdata19 */
+ K2G_CORE_IOPAD(0x108c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata18.dssdata18 */
+ K2G_CORE_IOPAD(0x1090) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata17.dssdata17 */
+ K2G_CORE_IOPAD(0x1094) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata16.dssdata16 */
+ K2G_CORE_IOPAD(0x1098) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata15.dssdata15 */
+ K2G_CORE_IOPAD(0x109c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata14.dssdata14 */
+ K2G_CORE_IOPAD(0x10a0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata13.dssdata13 */
+ K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata12.dssdata12 */
+ K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata11.dssdata11 */
+ K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata10.dssdata10 */
+ K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata9.dssdata9 */
+ K2G_CORE_IOPAD(0x10b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata8.dssdata8 */
+ K2G_CORE_IOPAD(0x10b8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata7.dssdata7 */
+ K2G_CORE_IOPAD(0x10bc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata6.dssdata6 */
+ K2G_CORE_IOPAD(0x10c0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata5.dssdata5 */
+ K2G_CORE_IOPAD(0x10c4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata4.dssdata4 */
+ K2G_CORE_IOPAD(0x10c8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata3.dssdata3 */
+ K2G_CORE_IOPAD(0x10cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata2.dssdata2 */
+ K2G_CORE_IOPAD(0x10d0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata1.dssdata1 */
+ K2G_CORE_IOPAD(0x10d4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata0.dssdata0 */
+ K2G_CORE_IOPAD(0x10d8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssvsync.dssvsync */
+ K2G_CORE_IOPAD(0x10dc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsshsync.dsshsync */
+ K2G_CORE_IOPAD(0x10e0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsspclk.dsspclk */
+ K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssde */
+ K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */
+ >;
+ };
};
&uart0 {
@@ -357,3 +411,50 @@
pinctrl-0 = <&emac_pins>;
status = "okay";
};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+ clock-frequency = <400000>;
+
+ sii9022: sii9022@3b {
+ #sound-dai-cells = <0>;
+ compatible = "sil,sii9022";
+ reg = <0x3b>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ sii9022_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ sii9022_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vout_pins>;
+ status = "ok";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&sii9022_in>;
+ data-lines = <24>;
+ };
+ };
+};
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH resend 0/2] dts: keystone-k2g-evm: Display support
2020-02-14 9:22 [PATCH resend 0/2] dts: keystone-k2g-evm: Display support Jyri Sarha
2020-02-14 9:22 ` [PATCH resend 1/2] ARM: dts: keystone-k2g: Add DSS node Jyri Sarha
2020-02-14 9:22 ` [PATCH resend 2/2] ARM: dts: keystone-k2g-evm: add HDMI video support Jyri Sarha
@ 2020-02-14 17:40 ` santosh.shilimkar
2020-06-02 8:13 ` Tomi Valkeinen
2 siblings, 1 reply; 6+ messages in thread
From: santosh.shilimkar @ 2020-02-14 17:40 UTC (permalink / raw)
To: Jyri Sarha, dri-devel, ssantosh, linux-arm-kernel, devicetree
Cc: mark.rutland, bparrot, praneeth, robh+dt, peter.ujfalusi,
tomi.valkeinen, laurent.pinchart
On 2/14/20 1:22 AM, Jyri Sarha wrote:
> Resend because the earlier recipient list was wrong.
>
> Now that drm/tidss is queued for mainline, lets add display support for
> k2g-evm. There is no hurry since tidss is out only in v5.7, but it
> should not harm to have the dts changes in place before that.
>
> Jyri Sarha (2):
> ARM: dts: keystone-k2g: Add DSS node
> ARM: dts: keystone-k2g-evm: add HDMI video support
>
> arch/arm/boot/dts/keystone-k2g-evm.dts | 101 +++++++++++++++++++++++++
> arch/arm/boot/dts/keystone-k2g.dtsi | 22 ++++++
> 2 files changed, 123 insertions(+)
>
Ok. Will add this to the next queue.
Regards,
Santosh
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH resend 0/2] dts: keystone-k2g-evm: Display support
2020-02-14 17:40 ` [PATCH resend 0/2] dts: keystone-k2g-evm: Display support santosh.shilimkar
@ 2020-06-02 8:13 ` Tomi Valkeinen
2020-06-02 15:18 ` santosh.shilimkar
0 siblings, 1 reply; 6+ messages in thread
From: Tomi Valkeinen @ 2020-06-02 8:13 UTC (permalink / raw)
To: santosh.shilimkar, Jyri Sarha, dri-devel, ssantosh,
linux-arm-kernel, devicetree
Cc: mark.rutland, praneeth, robh+dt, peter.ujfalusi, tomi.valkeinen,
laurent.pinchart
Hi Santosh,
On 14/02/2020 19:40, santosh.shilimkar@oracle.com wrote:
> On 2/14/20 1:22 AM, Jyri Sarha wrote:
>> Resend because the earlier recipient list was wrong.
>>
>> Now that drm/tidss is queued for mainline, lets add display support for
>> k2g-evm. There is no hurry since tidss is out only in v5.7, but it
>> should not harm to have the dts changes in place before that.
>>
>> Jyri Sarha (2):
>> ARM: dts: keystone-k2g: Add DSS node
>> ARM: dts: keystone-k2g-evm: add HDMI video support
>>
>> arch/arm/boot/dts/keystone-k2g-evm.dts | 101 +++++++++++++++++++++++++
>> arch/arm/boot/dts/keystone-k2g.dtsi | 22 ++++++
>> 2 files changed, 123 insertions(+)
>>
> Ok. Will add this to the next queue.
What happened with this one? It used to be in linux-next, but now I don't see it anymore.
Tomi
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH resend 0/2] dts: keystone-k2g-evm: Display support
2020-06-02 8:13 ` Tomi Valkeinen
@ 2020-06-02 15:18 ` santosh.shilimkar
0 siblings, 0 replies; 6+ messages in thread
From: santosh.shilimkar @ 2020-06-02 15:18 UTC (permalink / raw)
To: Tomi Valkeinen, Jyri Sarha, dri-devel, ssantosh,
linux-arm-kernel, devicetree
Cc: mark.rutland, praneeth, robh+dt, laurent.pinchart, peter.ujfalusi
On 6/2/20 1:13 AM, Tomi Valkeinen wrote:
> Hi Santosh,
>
> On 14/02/2020 19:40, santosh.shilimkar@oracle.com wrote:
>> On 2/14/20 1:22 AM, Jyri Sarha wrote:
>>> Resend because the earlier recipient list was wrong.
>>>
>>> Now that drm/tidss is queued for mainline, lets add display support for
>>> k2g-evm. There is no hurry since tidss is out only in v5.7, but it
>>> should not harm to have the dts changes in place before that.
>>>
>>> Jyri Sarha (2):
>>> ARM: dts: keystone-k2g: Add DSS node
>>> ARM: dts: keystone-k2g-evm: add HDMI video support
>>>
>>> arch/arm/boot/dts/keystone-k2g-evm.dts | 101 +++++++++++++++++++++++++
>>> arch/arm/boot/dts/keystone-k2g.dtsi | 22 ++++++
>>> 2 files changed, 123 insertions(+)
>>>
>> Ok. Will add this to the next queue.
>
> What happened with this one? It used to be in linux-next, but now I
> don't see it anymore.
>
Pull request [1] was sent during last merge window. Thought it was
picked up but doesn't seems to be. Have sent question to arm-soc
maintainers.
Regards,
Santosh
[1] https://www.spinics.net/lists/arm-kernel/msg791224.html
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread