[PATCH] dt-bindings: soc: ti: Update TI PRUSS bindings about schemas to include

* [PATCH] dt-bindings: soc: ti: Update TI PRUSS bindings about schemas to include
@ 2020-12-16 22:50 Grzegorz Jaszczyk
  2020-12-21 21:32 ` Rob Herring
  0 siblings, 1 reply; 4+ messages in thread
From: Grzegorz Jaszczyk @ 2020-12-16 22:50 UTC (permalink / raw)
  To: ssantosh, robh+dt, s-anna
  Cc: devicetree, grzegorz.jaszczyk, praneeth, santosh.shilimkar,
	linux-kernel, tony, linux-omap, lee.jones, linux-arm-kernel

Now after ti,pruss-intc.yaml and ti,pru-rproc.yaml are merged, include
them in proper property and extend the examples section.

At the occasion extend the allowed property list about dma-ranges.

Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
---
 .../devicetree/bindings/soc/ti/ti,pruss.yaml  | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index 037c51b2f972..dbc62821c60b 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -81,6 +81,9 @@ properties:
   ranges:
     maxItems: 1
 
+  dma-ranges:
+    maxItems: 1
+
   power-domains:
     description: |
       This property is as per sci-pm-domain.txt.
@@ -278,6 +281,9 @@ patternProperties:
       that is common to all the PRU cores. This should be represented as an
       interrupt-controller node.
 
+    allOf:
+      - $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml#
+
     type: object
 
   mdio@[a-f0-9]+$:
@@ -299,6 +305,9 @@ patternProperties:
       present on K3 SoCs have additional auxiliary PRU cores with slightly
       different IP integration.
 
+    allOf:
+      - $ref: /schemas/remoteproc/ti,pru-rproc.yaml#
+
     type: object
 
 required:
@@ -371,6 +380,36 @@ examples:
             reg = <0x32000 0x58>;
         };
 
+        pruss_intc: interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            interrupts = <20 21 22 23 24 25 26 27>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4", "host_intr5",
+                              "host_intr6", "host_intr7";
+        };
+
+        pru0: pru@34000 {
+            compatible = "ti,am3356-pru";
+            reg = <0x34000 0x2000>,
+                  <0x22000 0x400>,
+                  <0x22400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am335x-pru0-fw";
+        };
+
+        pru1: pru@38000 {
+            compatible = "ti,am3356-pru";
+            reg = <0x38000 0x2000>,
+                  <0x24000 0x400>,
+                  <0x24400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am335x-pru1-fw";
+        };
+
         pruss_mdio: mdio@32400 {
             compatible = "ti,davinci_mdio";
             reg = <0x32400 0x90>;
@@ -425,6 +464,43 @@ examples:
             reg = <0x32000 0x58>;
         };
 
+        pruss1_intc: interrupt-controller@20000 {
+            compatible = "ti,pruss-intc";
+            reg = <0x20000 0x2000>;
+            interrupt-controller;
+            #interrupt-cells = <3>;
+            interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host_intr0", "host_intr1",
+                              "host_intr2", "host_intr3",
+                              "host_intr4",
+                              "host_intr6", "host_intr7";
+            ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+        };
+
+        pru1_0: pru@34000 {
+            compatible = "ti,am4376-pru";
+            reg = <0x34000 0x3000>,
+                  <0x22000 0x400>,
+                  <0x22400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am437x-pru1_0-fw";
+        };
+
+        pru1_1: pru@38000 {
+            compatible = "ti,am4376-pru";
+            reg = <0x38000 0x3000>,
+                  <0x24000 0x400>,
+                  <0x24400 0x100>;
+            reg-names = "iram", "control", "debug";
+            firmware-name = "am437x-pru1_1-fw";
+        };
+
         pruss1_mdio: mdio@32400 {
             compatible = "ti,davinci_mdio";
             reg = <0x32400 0x90>;
-- 
2.29.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread