From: Baruch Siach <baruch@tkos.co.il>
To: "Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Lee Jones" <lee.jones@linaro.org>
Cc: Baruch Siach <baruch@tkos.co.il>, Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Balaji Prakash J <bjagadee@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Robert Marko <robert.marko@sartura.hr>,
Kathiravan T <kathirav@codeaurora.org>,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 3/4] dt-bindings: pwm: add IPQ6018 binding
Date: Thu, 22 Jul 2021 13:01:09 +0300 [thread overview]
Message-ID: <70f0522a9394e9da2f31871442d47f6ad0ff41aa.1626948070.git.baruch@tkos.co.il> (raw)
In-Reply-To: <889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.il>
DT binding for the PWM block in Qualcomm IPQ6018 SoC.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
v6:
Device node is child of TCSR; remove phandle (Rob Herring)
Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König)
v5: Use qcom,pwm-regs for phandle instead of direct regs (Bjorn
Andersson, Kathiravan T)
v4: Update the binding example node as well (Rob Herring's bot)
v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
v2: Make #pwm-cells const (Rob Herring)
---
.../devicetree/bindings/pwm/ipq-pwm.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
diff --git a/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
new file mode 100644
index 000000000000..ee2bb03a1223
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/ipq-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ6018 PWM controller
+
+maintainers:
+ - Baruch Siach <baruch@tkos.co.il>
+
+properties:
+ "#pwm-cells":
+ const: 2
+
+ compatible:
+ const: qcom,ipq6018-pwm
+
+ offset:
+ description: |
+ Offset of PWM register in the TCSR block.
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: core
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-rates:
+ maxItems: 1
+
+required:
+ - "#pwm-cells"
+ - compatible
+ - clocks
+ - clock-names
+ - assigned-clocks
+ - assigned-clock-rates
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ tcsr: syscon@1937000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x01937000 0x0 0x21000>;
+
+ pwm: pwm {
+ #pwm-cells = <2>;
+ compatible = "qcom,ipq6018-pwm";
+ offset = <0xa010>;
+ clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ clock-names = "core";
+ assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ assigned-clock-rates = <100000000>;
+ status = "disabled";
+ };
+ };
+ };
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-22 10:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-22 10:01 [PATCH v6 1/4] arm64: dts: ipq6018: correct TCSR block area Baruch Siach
2021-07-22 10:01 ` [PATCH v6 2/4] pwm: driver for qualcomm ipq6018 pwm block Baruch Siach
2021-07-25 18:35 ` Bjorn Andersson
2021-07-26 4:31 ` Baruch Siach
2021-07-22 10:01 ` Baruch Siach [this message]
2021-07-23 23:03 ` [PATCH v6 3/4] dt-bindings: pwm: add IPQ6018 binding Rob Herring
2021-07-25 18:27 ` Bjorn Andersson
2021-07-26 4:08 ` Baruch Siach
2021-07-26 17:48 ` Bjorn Andersson
2021-07-26 20:38 ` Rob Herring
2021-07-22 10:01 ` [PATCH v6 4/4] arm64: dts: ipq6018: add pwm node Baruch Siach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=70f0522a9394e9da2f31871442d47f6ad0ff41aa.1626948070.git.baruch@tkos.co.il \
--to=baruch@tkos.co.il \
--cc=agross@kernel.org \
--cc=bjagadee@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kathirav@codeaurora.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=robert.marko@sartura.hr \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).