Le jeudi 17 septembre 2020 à 12:39 +0200, Hans Verkuil a écrit : > On 14/05/2020 17:39, Nicolas Dufresne wrote: > > As per spec, the CAPTURE resolution should be automatically set based on > > the OTUPUT resolution. This patch properly propagate width/height to the > > capture when the OUTPUT format is set and override the user provided > > width/height with configured OUTPUT resolution when the CAPTURE fmt is > > updated. > > > > This also prevents userspace from selecting a CAPTURE resolution that is > > too small, avoiding unwanted page faults. > > > > Signed-off-by: Nicolas Dufresne > > --- > > drivers/staging/media/sunxi/cedrus/cedrus_video.c | 7 ++++++- > > 1 file changed, 6 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c > > index 16d82309e7b6..a6d6b15adc2e 100644 > > --- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c > > +++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c > > @@ -247,6 +247,8 @@ static int cedrus_try_fmt_vid_cap(struct file *file, void *priv, > > return -EINVAL; > > > > pix_fmt->pixelformat = fmt->pixelformat; > > + pix_fmt->width = ctx->src_fmt.width; > > + pix_fmt->height = ctx->src_fmt.height; > > cedrus_prepare_format(pix_fmt); > > > > return 0; > > @@ -319,11 +321,14 @@ static int cedrus_s_fmt_vid_out(struct file *file, void *priv, > > break; > > } > > > > - /* Propagate colorspace information to capture. */ > > + /* Propagate format information to capture. */ > > ctx->dst_fmt.colorspace = f->fmt.pix.colorspace; > > ctx->dst_fmt.xfer_func = f->fmt.pix.xfer_func; > > ctx->dst_fmt.ycbcr_enc = f->fmt.pix.ycbcr_enc; > > ctx->dst_fmt.quantization = f->fmt.pix.quantization; > > + ctx->dst_fmt.width = ctx->src_fmt.width; > > + ctx->dst_fmt.height = ctx->src_fmt.height; > > You can only do this if the capture queue isn't busy. > > See also hantro_reset_raw_fmt() where it does that check. > > So this needs a v2. I missed this reply, wasn't expecting a negative third review. I'll copy and paste from there. So basically: - EBUSY if peer vq is busy - EBUSY if pixel format is changed while vq is busy - EBUSY if streaming Obviously, I don't have userspace to exercise any of these cases, but it seems to make sense. I remembered about this patch today as someone reported the kernel crash we get without this patch: --- I tried testing cedrus with gstreamer 0.18 and it managed to crash the kernel on A64. I used: gst-launch-1.0 filesrc location=test.mkv ! matroskademux ! queue ! h264parse ! v4l2slh264dec ! filesink location=aaa.dat Unable to handle kernel paging request at virtual address 8080808080808088 Mem abort info: ESR = 0x96000044 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000044 CM = 0, WnR = 1 [8080808080808088] address between user and kernel address ranges Internal error: Oops: 96000044 [#1] SMP Modules linked in: modem_power hci_uart btrtl bluetooth ecdh_generic ecc sunxi_cedrus(C) sun8i_ce crypto_engine snd_soc_bt_sco snd_soc_simple_card snd_soc_simple_card_utils snd_soc_simple_amplifier sun50i_codec_analog sun8i_codec sun8i_adda_pr_regmap snd_soc_ec25 sun4i_i2s snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore stk3310 inv_mpu6050_i2c inv_mpu6050 st_magn_i2c st_sensors_i2c st_magn st_sensors industrialio_triggered_buffer kfifo_buf regmap_i2c option usb_wwan usbserial anx7688 ohci_platform ohci_hcd ehci_platform ehci_hcd g_cdc usb_f_acm u_serial usb_f_ecm u_ether libcomposite sunxi phy_generic musb_hdrc udc_core usbcore sun8i_rotate v4l2_mem2mem gc2145 ov5640 sun6i_csi videobuf2_dma_contig v4l2_fwnode videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc 8723cs(C) cfg80211 rfkill lima gpu_sched goodix CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 5.9.0-rc5- 00386-g4fe2ef82bd0b #62 Hardware name: Pine64 PinePhone (1.2) (DT) pstate: 80000085 (Nzcv daIf -PAN -UAO BTYPE=--) pc : v4l2_m2m_buf_remove+0x44/0x90 [v4l2_mem2mem] lr : v4l2_m2m_buf_remove+0x18/0x90 [v4l2_mem2mem] sp : ffffffc010c8be20 x29: ffffffc010c8be20 x28: ffffffc010bb2fc0 x27: 0000000000000060 x26: ffffffc010935e58 x25: ffffffc010c06a5a x24: 0000000000000080 x23: 0000000000000005 x22: ffffffc010c8bf4c x21: ffffff806ba0d088 x20: ffffff80687d1800 x19: ffffff8066c40298 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 000001b66678fd80 x14: 0000000000000204 x13: 0000000000000001 x12: 0000000000000040 x11: ffffff806f0c0248 x10: ffffff806f0c024a x9 : ffffffc010bbdac8 x8 : ffffff806f000270 x7 : 0000000000000000 x6 : dead000000000100 x5 : dead000000000122 x4 : 0000000000000000 x3 : 8080808080808080 x2 : 8080808080808080 x1 : ffffff80641327a8 x0 : 0000000000000080 Call trace: v4l2_m2m_buf_remove+0x44/0x90 [v4l2_mem2mem] v4l2_m2m_buf_done_and_job_finish+0x34/0x140 [v4l2_mem2mem] cedrus_irq+0x8c/0xc0 [sunxi_cedrus] __handle_irq_event_percpu+0x54/0x150 handle_irq_event+0x4c/0xec handle_fasteoi_irq+0xbc/0x1c0 __handle_domain_irq+0x78/0xdc gic_handle_irq+0x50/0xa0 el1_irq+0xb8/0x140 arch_cpu_idle+0x10/0x14 cpu_startup_entry+0x24/0x60 rest_init+0xb0/0xbc arch_call_rest_init+0xc/0x14 start_kernel+0x690/0x6b0 Code: f2fbd5a6 f2fbd5a5 52800004 a9400823 (f9000462) ---[ end trace 88233b9a76cdb261 ]--- Kernel panic - not syncing: Fatal exception in interrupt > > Regards, > > Hans > > > + cedrus_prepare_format(&ctx->dst_fmt); > > > > return 0; > > } > >